An In-Depth Look at the Replacement Master Cylinder Assembly for Dexter Brake Actuators Video

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

When bleeding the brakes on a surge actuator, such as the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR, you want to start by making sure there is fresh fluid in the reservoir then press a screw driver against the rod in the access…

The replacement reverse lock out you are looking for is the part #TK71-755-00. This would allow you to use the same adapters and fittings you have now.

The Replacement Shock Absorber Spring Kit #TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake…

Your old unit may have been self grounding if it only had the blue wire for the reverse light circuit, but the Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR does have an independent ground wire that will need…

The master cylinder assembly on the Titan model 20 actuators, like #T1521000 as an example, is bolted to the inside of the actuator. Take a look at the picture I have included as an example. There are 2 bolts on each side holding in the assembly.…

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

The Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR can be used to replace the A-60 master cylinder and is designed to fit on a variety of Dexter/UFP brake actuators.

When It comes to replacing your A-60, I recommend The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2 inch Ball - Zinc - 7.5K #DX89FR. It is a bolt-on model, that has a weight capacity of 7,500 pounds. It has the electric…

The Replacement Inner Member for Dexter DX7.5L Actuator part #DX99FR is designed for UFP Model A-60 Actuators. I can't look up what actuator any one particular trailer uses but if you can get me the the model number of the existing actuator found…

The Dexter Actuator Inner Member part #DX99FR is designed as a replacement center section for the Dexter DX7.5L A-60 part #DX56FR which was designed to fit a 3 inch wide by 5 inch tall straight trailer tongue. If you are looking for a coupler…