Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman #54700-003 (universal) or #54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the…
Hello Alan, thanks for reaching out. We should have a Roadmaster Reflex Sterring Stabilizer for you, but there is no way for us to look up your VIN. What kind of motorhome do you have? Is it a E-350 Class C? If so, the Roadmaster Reflex RV Steering…
While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…
From what I was able to find, the Power Gear 522176 was actually the direct replacement for the Power Gear 523983. What I can confirm is that the Lippert 383745 you mentioned is the same motor (just with a different part number) as the 522176, and we…
Hello Robert, thanks for reaching out. We do offer replacement fenders for the Demco Kar Kaddy SS. Take a look at the following: - Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly - Passenger Side #DR74FR - Replacement Fender Assembly for…
The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…
To replace your existing Venture motor, the Lippert Components Venture 5th Wheel RV Landing Gear Motor #LC142178 is the correct replacement part for you. For an aluminum gear box, you are correct that you can use part #LG-179015. The #LC142178 motor…
We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.
Hey Jeff, yes the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676 is compatible with the Roadmaster Direct Connect base plate kits like what you have on your 2010 Hyunda Elantra #521624-1.
Most trailer wiring that runs to trailer lights is 16 gauge. I would rather people use 14 or 12 unless the lights are LED which draw considerably less. But for most people 16 gauge works just fine for basic trailer lighting. If you are planning on…
From what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver #13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them…
Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…
Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman #54700-003 (universal) or #54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the…
Hello Alan, thanks for reaching out. We should have a Roadmaster Reflex Sterring Stabilizer for you, but there is no way for us to look up your VIN. What kind of motorhome do you have? Is it a E-350 Class C? If so, the Roadmaster Reflex RV Steering…
While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…
From what I was able to find, the Power Gear 522176 was actually the direct replacement for the Power Gear 523983. What I can confirm is that the Lippert 383745 you mentioned is the same motor (just with a different part number) as the 522176, and we…
Hello Robert, thanks for reaching out. We do offer replacement fenders for the Demco Kar Kaddy SS. Take a look at the following: - Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly - Passenger Side #DR74FR - Replacement Fender Assembly for…
The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…
To replace your existing Venture motor, the Lippert Components Venture 5th Wheel RV Landing Gear Motor #LC142178 is the correct replacement part for you. For an aluminum gear box, you are correct that you can use part #LG-179015. The #LC142178 motor…
We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.
Hey Jeff, yes the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676 is compatible with the Roadmaster Direct Connect base plate kits like what you have on your 2010 Hyunda Elantra #521624-1.
Most trailer wiring that runs to trailer lights is 16 gauge. I would rather people use 14 or 12 unless the lights are LED which draw considerably less. But for most people 16 gauge works just fine for basic trailer lighting. If you are planning on…
From what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver #13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them…
Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…
Upgrade your boat's hatch with 40 lb force gas struts, ideal for smooth and reliable operation. These struts are perfect for replacing worn-out parts on various boat models, ensuring a perfect fit and easy installation. Enjoy enhanced performance and durability, making your boating experience more enjoyable.
40 lb force gas struts provide the right balance of strength and ease of use for boat hatches. They ensure smooth operation and secure holding, making them ideal for replacing older, weaker struts. This force level is perfect for medium-sized hatches, offering reliable support without being too stiff.
These struts enhance hatch performance by providing consistent lift and hold, reducing the effort needed to open and close. They prevent slamming and ensure a secure hold when open, which is crucial for safety and convenience on the water.
Yes, installing 40 lb gas struts is straightforward. They often match the original struts in size and fittings, making them a direct replacement. With basic tools, you can swap them out quickly, ensuring your boat is ready for the next adventure.
Consider the force rating, length, and end fittings to ensure compatibility with your hatch. 40 lb struts are a common choice for medium hatches, providing the right support. Check the mounting points and ensure the new struts match the old ones for a seamless fit.
Absolutely, 40 lb gas struts are versatile and can fit various boat models. They are ideal for replacing struts on hatches of similar size and weight, ensuring a perfect fit and improved functionality across different boat types.
Filters
