Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman #54700-003 (universal) or #54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the…
Hello Alan, thanks for reaching out. We should have a Roadmaster Reflex Sterring Stabilizer for you, but there is no way for us to look up your VIN. What kind of motorhome do you have? Is it a E-350 Class C? If so, the Roadmaster Reflex RV Steering…
While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…
From what I was able to find, the Power Gear 522176 was actually the direct replacement for the Power Gear 523983. What I can confirm is that the Lippert 383745 you mentioned is the same motor (just with a different part number) as the 522176, and we…
Hello Robert, thanks for reaching out. We do offer replacement fenders for the Demco Kar Kaddy SS. Take a look at the following: - Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly - Passenger Side #DR74FR - Replacement Fender Assembly for…
The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…
To replace your existing Venture motor, the Lippert Components Venture 5th Wheel RV Landing Gear Motor #LC142178 is the correct replacement part for you. For an aluminum gear box, you are correct that you can use part #LG-179015. The #LC142178 motor…
We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.
Hey Jeff, yes the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676 is compatible with the Roadmaster Direct Connect base plate kits like what you have on your 2010 Hyunda Elantra #521624-1.
Most trailer wiring that runs to trailer lights is 16 gauge. I would rather people use 14 or 12 unless the lights are LED which draw considerably less. But for most people 16 gauge works just fine for basic trailer lighting. If you are planning on…
From what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver #13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them…
Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…
Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman #54700-003 (universal) or #54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the…
Hello Alan, thanks for reaching out. We should have a Roadmaster Reflex Sterring Stabilizer for you, but there is no way for us to look up your VIN. What kind of motorhome do you have? Is it a E-350 Class C? If so, the Roadmaster Reflex RV Steering…
While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…
From what I was able to find, the Power Gear 522176 was actually the direct replacement for the Power Gear 523983. What I can confirm is that the Lippert 383745 you mentioned is the same motor (just with a different part number) as the 522176, and we…
Hello Robert, thanks for reaching out. We do offer replacement fenders for the Demco Kar Kaddy SS. Take a look at the following: - Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly - Passenger Side #DR74FR - Replacement Fender Assembly for…
The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…
To replace your existing Venture motor, the Lippert Components Venture 5th Wheel RV Landing Gear Motor #LC142178 is the correct replacement part for you. For an aluminum gear box, you are correct that you can use part #LG-179015. The #LC142178 motor…
We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.
Hey Jeff, yes the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676 is compatible with the Roadmaster Direct Connect base plate kits like what you have on your 2010 Hyunda Elantra #521624-1.
Most trailer wiring that runs to trailer lights is 16 gauge. I would rather people use 14 or 12 unless the lights are LED which draw considerably less. But for most people 16 gauge works just fine for basic trailer lighting. If you are planning on…
From what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver #13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them…
Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Explore the versatility of 20 lb force gas struts, ideal for projects like ski lockers or pontoon lids. These struts offer reliable support and ease of installation, making them a favorite for DIY enthusiasts and boat owners alike.
20 lb force gas struts are perfect for applications like ski lockers, pontoon lids, and small hatches. They provide just the right amount of lift and support, making them a go-to choice for boat owners and DIY projects that require moderate force.
Installing 20 lb force gas struts is straightforward, especially with online resources available. Many find success by following video guides, making it a simple task even for those new to DIY projects. The right size and ends ensure a hassle-free installation.
Choosing 20 lb force struts is ideal for projects needing moderate support without excessive pressure. They are versatile, fitting a range of applications from boat compartments to small lids, offering a balance of strength and ease of use.
These struts are built to last, with many users noting their robust construction and reliable performance. They hold up well over time, providing consistent support and functionality, making them a dependable choice for various applications.
When selecting 20 lb force gas struts, consider the size and end fittings to ensure compatibility with your project. It's also important to assess the required lift and support to match the strut's force rating with your specific needs.
Filters
