JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 6.41" compressed, 10" extended, and has 20 lbs of force.
Features:
Specs:
When replacing gas shock on your vehicle or RV, you will want to make sure you are buying a replacement with the exact same extended length, compressed length, and pounds of force. This information is usually printed on the shock. Lengths are measured from the center of the ball joint used for mounting. If you are planning on installing gas shocks on something for the first time, identifying the shock you need requires fairly complex initial calculations, so be sure to do your research to avoid purchasing a shock that will not fit your application.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the JR Products 10 inch long gas shock. Now this gas shock is designed to replace a worn or damaged shock on your RV entry door or storage doors. The extended length, which will be measured from the center of this ball socket to the center of this ball socket is going to measure right at 10 inches. Now the compressed length, if we would compress this all the way then measure it, it would be 6.41 inches. The output force on the shock is 20 pounds, and the connection type on both ends is a retaining clip on a 10 millimeter ball socket.I want to zoom in just to show you the detail on this, but basically what you would do is there's your 10 millimeter ball socket. It's designed to fit onto a 10 millimeter ball, so to install it, what you'd want to do is you notice the retaining clip on the top, you just slide a flat tip screwdriver under that retaining clip, pry up on it to release it, and that'll release the pressure on the socket and then you'll be able to push this onto the 10 millimeter ball.
And then once it's on, push this clip all the way back down and that'll secure it in place. So it is a very easy, simple installation. The shock also has a nice black nitride finish to it.But that should do it for the review on the JR Products 10 inch long gas shock..
Average Customer Rating: 4.7 out of 5 stars (375 Customer Reviews)
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 6.41" compressed, 10" extended, and has 20 lbs of force.
Do you have a question about this RV Door Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.