GMC Sierra 3500 Truck Bed Mat

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system…

Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…

Yes it is. The Black Armour Heavy-Duty Custom Truck Bed Mat item #BA67AR does come in two parts. This mat is confirmed to fit the 8' bed length of the 2022 Ford F-250. We do have a one piece option for a custom fit rubber bed liner for your…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or…

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled up in a box so you'll need to unroll it and let…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

The correct BedRug bed mat for beds with a drop-in liner for a 2011 Ford F-150 with a 5-1/2' bed would be part #BMQ04SCD. The #BMQ04SBD you were looking at would be a fit for a 6-1/2' bed. If you need anything else please let me know and…

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.