Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mounting panel creates a factory look for your GM or Isuzu's dash when you install the control knob from your Tow-Pro Elite or Liberty brake controller. Drilling template and self-adhesive tape included.
Features:
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Etrailer.com is a great company! Friendly and knowledgeable staff.
This product fit perfectly and looks great in my 2025 Frontier.
This panel fit great in my 2019 Ford ranger. I used it with a Reese tow power compact IQ brake controller. It gave me the factory look that I wanted with the controller knob in an easy to access location. The best part is that there’s no modifications or holes drilled. You can easily remove it and put the 12v outlet back in.
This snapped right into the 12v outlet hole in the dash panel of a 2021 Ford Ranger! Much nicer than drilling anything. Puts the knob in a perfect spot for quick engagement and visual of the LED indicator.
It fit perfect
Just to be sure it wouldn't spin i used a little silicone on the edge.
Makes it easy to replace the lighter socket in my Jeep Gladiator. I wished the letter was white so it matched the rest of the interior. Additional, it has a lip on the rear that makes it stuck off the dashboard a bit. I would recommend the unit.
Product worked great for my 2020 Ranger. It mounted perfectly under the dash and put the controller in the spare 12V socket. Looks good.
Made Redarc brake controller installation into one of the power ports (fka, cigarette lighters spots) easy and looks like original equipment.
Had to cut off the locator tab and file down a little bit to install with the letters and light hole up in the Gladiator. It did snap on well however doesn't exactly fit flush without some slight modifications and a shim I used that was on the original cigarette lighter. Looks great now and close to factory.
Bought this to mount in my 2020 Ranger as shown in the etrailer Redarc install video! Worked as described!
Thanks for pointing out a great alternative install location!
Very easy installation and after very little trimming it went in my 12V socket. (Internals were disconnected and removed)
Truck is 2020 Ford Ranger
etrailer kept me informed and seemed g enuine
I know the listing doesn't say anything about a 2021 ford ranger, but it fit just fine after I removed one of the two 12v sockets in the dashboard. Looks good and works great.
Looks stock in a Ford Ranger. Ford should use these if you buy the “factory” brake controller instead of the spot they install it above he hood release.
This is made for a Chevy but worked perfectly in my 2019 Ford Ranger. This made for the cleanest installation, in my opinion.
This mounting piece is awesome, everything snaps into place very well and it feels and looks like it came with the truck from OEM.
2022 Ford Ranger
Brooke M.
5/3/2025
Man, it really does! Great job on that install because it really took me a second to find it in the picture. Seamless!
Saved about 200.00 using this with the Tow-Pro by RedArc over using this OEM trailer controller. Set ups easy (hardest part is removing the 12v battery supply), nothing a screwdriver and snips can't fix. Install took less then 30 minutes using the TPH - 022 harness for the Gladiator. Looks very professional.
Michael
5/3/2025
Looks like it was an OEM product. Easy install. Working perfectly.
Worked for my 2021 ranger looks factory
Needed a trim piece for my '94 Dodge Ram 1500. I knew this wasn't an exact fit but with a little Dremel work and a hot glue gun I think it turned out looking pretty good. I replaced the lower cigarette lighter with the trailer brake controller switch.
I bought the redarc controller for my 2023 Ranger from Ford but this adapter from etrailer. There is a bunch of video online for installing it and it went in without a hitch. Works great.
Good day after a couple tries the round mounting plate was my best option I was replacing the dash insert with the electronic OEM brake controller plate that I found out would not work because my truck didn't have the RCM program so I bought the radic brake controller I took apart the OEM brake controller to get a piece of the plastic to make a plate then I cut out the OEM Dash plate to accept the piece of plastic and then cut that out to accept the round mounting plate ran all the wires everything works I'm going to attach a couple pictures or a few pictures to show what I did there is no direct replacement mounting plate for the small storage box on the OEM plate that was in there or replacing the OEM electric brake module there was no plate to fill that in so I made one myself probably not the finest work because I am very seeing impaired but you'll see in the pictures this is what it looks like thanks again everybody at the trailer for all your help and Jamie and I will attach the pictures
Used on a 2021 Ford Ranger XLT - Camping World installed the wiring and removed the guts of the left side 12v plug that wasn't being used. We did have to order this panel and I had it sent to my home instead of going back for Camping World to install. I only had to make a little notch at the top of the open hole where the 12v plug guts were removed so that it would fit- literally used my bare hacksaw blade and made about 3 little bitty notches and knocked out with a screwdriver and it slipped right in and snug.
Well, if you have a REDARC Tow-Pro Elite controller, and if you want to install it in a 12-volt receptacle, you need this panel! It fits perfectly where the 12-volt was, and it locks into place well.
Oh, by the way, I installed mine into a 2019 Ford Ranger, so if you have this, no worries!
Had the Redarc brake controller and mounting panel installed by a contact suggested by etrailer and they were great. Not only do they install things like this but they service Jeeps and nucamp trailers which is exactly what we have. In fact they service almost any vehicle and trailer. Great find. Thanks etraiiler! And the brake controller is just what we need.
Worked perfectly for my 2025 Wrangler JL. Removed the cigarette lighter and installed this in its place. You will need to make the top notch of the hole in the jeep a little bigger for this to fit but once you do, it clicks right into place. Holds securely and looks as close to factory as you can get.
Heather A.
5/1/2026
Wow, it does look like factory Jon. It blends right in! What are your big plans now that you have a brake controller?
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark S.
10/8/2022
One year latter and still very happy with this setup