Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the control panel for your Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817) or Ground Control TT automatic travel trailer leveling system (LC672136).
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, Kevin here with etrailer and today we're gonna be taking a look at the Lippert Ground Control 3.0 and travel trailer replacement touchpad. Have you been experiencing some issues with your ground control touch pad, maybe your buttons aren't working, which is pretty much the most common cause here on our touchpad issues is just after a while the sensors on the inside of our computer chip here kind of just wear out over time and then just doesn't really want to activate. So, the replacement touchpad is gonna be the only solution that you can really go with. It's just gonna completely replace your whole pad, since there is not a way to just replace the buttons themselves. Here's what your replacement Lippert touchpad is going to look like once it's fully installed. Just like with your original one, it is going to allow you to manually adjust your jacks or auto level all of your jacks.
And, you can also set it to know exactly what height you need to be at when you're trying to hook up your truck. There isn't really that much troubleshooting that you can really do with the system besides just resetting the zero point calibration. So, if your touchpad isn't really working, it probably is time to replace it. Other than that, the only other way to activate your leveling jacks would be to physically get under your trailer and actually manually crank those down with a wrench. And then also, the same for your landing gears, which can be a pretty big hassle.
Installation of your replacement touchpad should only take a few minutes. The hardest part really is just kind of popping it out of the base and then popping it back in, just cuz those tabs really aren't too forgiving. They don't really wanna pop in or out at all. But, let me show you how we did that. Your touchpad for your leveling system is typically going to be up in the front.
If you're replacing yours on a fifth wheel, typically it'll be right up next to your landing gears. If not, it's gonna be in that first cargo bay, usually right on the side. Typically on fifth wheels, it will be on the driver's side. And ours today, it is in that cargo box, and we have it right up here. Clean design, actually made a nice little cutout for it here, so we don't have to retrofit our own or make any additional holes here.
But, we're gonna just take our screws off so that we can gain access to the back of our touchpad. So, if we look on the back here, we have our wiring harness. We can just pinch that clip, pull that out. Now to get to our mounting screws for our little bracket that we have here. We're going to need to take either a little flathead or a pick to kinda pull that pad out. Get down in there. Also, need to slowly kind of pop this out, be careful, these pins aren't really cooperative. Just work your way around it. So, with our touchpad, actually off of our base now, we can take a look at the back. You can get a better idea of exactly how our touchpad connects, just that little four prong connector. Since we're just replacing that, I'm gonna go ahead and just keep reusing our base and the base the grand design gave us. If this was a new install, you would just need to make sure that you had a cutout that's gonna fit this little inner portion so they can sit flush in the wall Then, you'll have four screws that you can use to actually mount it up to the wall of your cargo compartment. So, we'll then begin to pop our tabs into our base. This can be a little bit of a hassle. put new pad on, we can go ahead and reconnect it and then put our base back in place and hide our wiring through that little cut. Now, we can go ahead and start mounting our base back up and we can turn on our touchpad. Now that we're powered up, we can go ahead and adjust our jacks. Do anything we need to look through our settings here and we'll be all good to go. Well, I think that about does it for our look at the touchpad for Lippert Ground Control 3.0 and travel trailer leveling systems. My name's Kevin. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (102 Customer Reviews)
Replaces the control panel for your Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817) or Ground Control TT automatic travel trailer leveling system (LC672136).Just received the new touchpad. All looks good. Fortunately, I watched the etrailer video on touchpad replacement because removing the touchpad from its base was not very easy. While trying to pry the touchpad from the base it is not obvious how thick the touchpad is. Initially I did not insert the pry tool deep enough and it caught the thin (about 1/32 inch) touchpad surface, with writing on it, that is glued to its back plate and it started to separate. I quickly stopped, watched the video closely, and realized the total thickness of the touchpad with its glued on labeled surface and its own back plate is about 3/32 inch. Installers should make sure to push the pry tool in deep enough to catch the true back surface of the plate. Also recommend you start prying at the top middle (knotched) and slowly work around. Other than that all is well.
RV leveling control panel quit working or would only partially work. Ordered new one. Fast delivery and exactly what I was needing. Thank you for the service.
Screen fell down inside the unit. Hard to read left side.
Jenny N.
10/2/2023
Would you be able to send a picture of the panel? I can contact the manufacturer about it.
Jenny N.
10/11/2023
I needed a replacement control panel for our 2016 Heartland Cyclone. The detailed pictures online made it easy to identify the part and if it was the right one. The part online was slightly different from my original part, but worked perfectly!
I Got it two days quicker than they said. I installed it and it fixed the problem as soon as it was plugged in. Thank You
This is a perfect replacement on our 2014 Redwood! I love the shipping process from etrailer. I could track it all the way right to my mailbox.
For this order I used the "Place Order on Hold" feature at etrailer while I worked with Lippert to ensure my old part needed to be replaced. After confirming the conversion to order worked smoothly and promptly with the part arriving one day early. Additionally, etrailer support was also helpful in troubleshooting and getting me connected to Lippert. Part seems to be working great for now. For anyone else receiving this part I tried using the existing base and had some trouble but the new one etrailer sent with the touch pad worked great.
I haven't received the item. UPS said they left it on the back porch but i have ring video and the truck pulled up in front of my house and left a package over the gate like they usually do. However, the package was from the Veteran Administration for me. Point is, i haven't received the above item yet. i tried to file a claim and ups wouldn't let me do it yesterday.
i still don't have my lippet control board yet
Jenny N.
5/18/2023
I will have our Customer Service team reach out so that we can trace the shipment and reach out to UPS.
Worked out of the box. No issues, will purchase from etrailer.com again.
Simple installation of the new control completely solved the non-functioning key issues I had with the original keypad/circuit board that was 10 years old. Old pad buttons had required increasing amounts of finger pressure for operation for last few years until certain buttons would not work at all. Wish I had purchased and installed three years ago. etrailer had the best price on this product. Roger at etrailer was a great help and Lippert Customer Service was also very helpful with all maintenance questions for the trailer jack system.
From a prior question concerning the lippert leveling control panel being answered by one of etrailer technicians allowed me to identify the part needed for my repairs. Purchased part, arrived a few days later, installed and now faults is repaired.
We were in desperate need of a new control panel or our rig wouldn't work. Everyone at etrailer was great, even helping get a delivery address corrected!
Bob
1/13/2023
Still working great!
Worked like a champ. Installation was easy and quick. At first had my doubts, but, in examination of the board and saw everything matched up with the old board, I was satisfied.
Just what I needed, solved the problem with my auto leveling system. Quick response, great service
Ordered entry steps and a controller for my leveling system .controller had a little bubble rap around it and put in the box with the steps didn't tape it down so it just bounced around in the box. When I received it was in three pieces it did work for now. That's why I give three stars because of packaging
Jenny N.
9/14/2022
Thank you for letting us know! I will have our customer service team reach out to you.
Our old panel was not working good no more. Just plug and play working great
Exact replacement. Reasonable price. Delivered quickly and arrived as promised. What else can you ask for?
Great service and expert assistance
Received panel and installed it. Pretty much plug and play. It solved my problems and the leveling system works like new again.
Part was delayed but finally arrived in bubble wrap envelope. Upon opening the parcel the display board was partially separated from the backing due to a broken plastic clip. This package must have seen some serious abuse. I resecured the clip and tested the functionality. All went well and we have use of our levelling system again.
Did not fix our problem
Easy to install and worked great
Arrived quickly, easy replacement, works perfectly.
Good product ! Great service!
Panel arrived in a timely manner. Was an easy replacement. Thanks.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
7/29/2023
Perfectly. Removed the old and installed new, very simple. Works great.