Optronics LED Trailer License Plate Light - 5 Diodes - Chrome Plated - Clear Lens
(345 reviews)
Price: $12.45
In Stock
Optronics LED Trailer License Plate Light - 5 Diodes - Chrome Plated - Clear Lens
Item # LPL41CB
Retail:$17.04
Our Price: $12.45
You Save: 27%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (345)
- Q & A (0)
- Photos
Optronics Trailer Lights - LPL41CB
- License Plate Lights
- Rectangle
- LED Light
- White
- 4L x 1-3/4W Inch
- Surface Mount
- Non-Submersible Lights
- Optronics
4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.
Features:
- Compact LED light illuminates your trailer's license plate
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Snap-on chrome housing
- Durable polycarbonate housing and lens
- Clear lens over white LEDs
- Compatible with 12V DC systems
- Surface mount to trailer with stainless steel mounting ears - hardware not included
- 2-Wire design includes power lead and ground wire
- DOT compliant
Specs:
- Dimensions: 4" wide x 1-3/4" tall x 2-3/16" long
- Distance between mounting holes (center on center): 3-1/4"
- Diodes: 5
- Power draw at 12.8V: 0.054 amps
- Lifetime warranty on LEDs
Manufacturer Cross Reference
Light will work as an exact replacement for:
Peterson # 4365X
LPL41CB Optronics Heavy Duty LED Trailer License Plate Light - 5 Diodes - Chrome Plated - Clear Lens
Alternate part number: LPL-41CB
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Optronics LED Trailer License Plate Light - 5 Diodes - Chrome Plated - Clear Lens - LPL41CB
Average Customer Rating: 4.7 out of 5 stars (345 Customer Reviews)
4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.by: James09/02/2023
I needed a replacement for a utility trailer. Other aftermarket lights would require drilling & tapping. This unit actually has a ground wire rather than grounding through the unit body.
by: Bob C.11/13/2016
I recently decided to relocate the license plate on my new 5 X 10 aluminum trailer. It came from the factory with the plate located under the bed of the trailer where lifting the trailer caused damage to the plate and was difficult to see. I purchased the license plate light and began the process of relocation. The light now provides and excellent illumination for the relocated plate, was easy to install, and was very economical to purchase. Attached pictures reflect the finished product installed on my trailer.
by: John 08/20/2018
Better than what I expected. First, the purchase experience on eTrailer was simple, quick and efficient. The LED light fixture is a big improvement over the OEM incandescent unit that came with my trailer. I liked having the long lead wires to work with, too. The LEDs will no doubt out-live the trailer itself! I'd recommend this product if you're looking to upgrade your existing license plate lamp.
John
8/30/2019
At one point I had to run a bead of clear silicone around the base of the lens to keep water out. No issues since then.
by: Aaron08/22/2023
Looks great, light output is great. The top plastic housing and lens are not held securely with the small screw though.
by: John06/10/2023
Great product quality, unfortunately this did not work for my trailer.... but nonetheless, it is of great quality and a great price !!!
by: Victor 04/04/2023
This light replaced the cheap plastic one that was on my cargo trailer. It was easy to install and looks great. I will buy another one if my wife runs into it with the lawn tractor again !
by: Matt03/08/2018
I purchased all new thin LED marker and license plate lights for my trailer. They look awesome and are very good quality. My order was shipped out quickly and received on time. I would definitely order from etrailer again.
by: Christopher06/25/2019
I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. I found a similar license plate light. The holes lined up perfectly and wired easily.
by: Mike 03/31/2023
Web site is easy to navigate, great price, item arrived as described, exact replacement that was on my trailer and the led is a lot brighter than the one that came with the trailer. I do recommend Etrailer for parts for trailer’s, truck and all kind of recreational vehicles.
Thanks, Mike
by: Samuel05/21/2016
Debbie
As always,... products are great and all I have ordered so far is well made and looks suburb Changed out my lights for LED and I can't be happier in looks ' the Licence plate light is bright and looks good in the dark
by: Lon09/30/2023
still working good.
by: Mark Lockwood01/24/2012
Contrary to the appearance in the photo this light is plastic and is poorly built. The description states,"Weather-tight seal w/gasket". The lens doesn't even reach the gasket and there are so many leak points to make the statement "Weather-tight" laughable.
by: Robert 08/26/2023
Great bang for the buck. Prompt deliver y.
by: James Swett12/27/2013
This really illuminates the plate. No more loose bulb issues, that can get me pulled over by the police. I've search for 2 years to find an LED plate light. I'm quite pleased.
by: Samuel 05/30/2023
Unit is holding up much better than the plastic housing on the one I replaced!
by: Joe02/21/2020
I decided it was time to repair the lighting on a 15 year old trailer due to several being broken, and the rest being very faded. I spent quite a bit of time on etrailer comparing options I finally settled on the 4 diode led's. I was excited to see the difference but was ultimately dissapointed with my decision to swap out the old incandescent with more costly led's as the new led lights put out significantly less light. As u can see in the pictures I did the passenger side first, then I took pics halfway thru. If u look at the driver side with old lights it has alot more light even though it only has only 2 working lights, compared to the 4 on the new side! In the front shot u can see the old on the right is casting 10 times the amount of light on the ground. On the plus side at least the orange is now orange, and the red is red instead of almost clear.
I will say the shipping was very fast, and the the customer service was awsome as always.
by: LED Trailer Plate Light03/26/2014
eTrailer is a very reputable company. They have excellent customer service, a great line of products, well packaged and quickly shipped.
This replaces the cheap plastic license plate light on a cargo trailer. It has a metal housing, is LED and is constructed much better than the plastic original. However, time will tell how the chrome finish holds up to rust. What was noticed is that there appears to be drain holes at the bottom of the wrap around lens on 3 sides. On the install, I will seal the top and side and leave the bottom for a drain. Unnecessary moisture is not a good thing. Overall a great product.
Joe D.
3/26/2015
It has been a year and the trailer plate light is working great. Contrary to my original post, the housing is chrome plated plastic.and was physically an exact replacement. Occasionally, it gets bumped and the lens dislodges, but it is an easy fix with a phillips screw driver. Overall, still worth 5-stars.Paul G. mentioned the right angle mounting causing water intrusion and the weak design. On my install, i noted the possible water intrusion issue and used a small dab of silicone sealer to block the top and side slots. It has not caused a problem. Also, the cargo trailer uses the chassis as a common ground. The white wire can be grounded to the screw that mounts the light to the trailer. The trailer wiring harness white ground is grounded near the hitch
by: Brian 06/11/2023
Direct swap for broken one. Bright LED.
by: Lisa 06/28/2023
EVERYTHING WE ORDER FROM HERE IS ALWAYS GREAT!!!
by: Donald08/15/2022
Was OK however because where its located will purchase something made from metal. Was not pleased with durability, has already come loose at single screw which holds assemble to base plate
by: Wayne 11/26/2021
Brighter than the original. 5 stars for a video on every item on your website and ordering ease.
Wayne
11/27/2022
Trailer was totaled but good product.
by: Matthew 05/01/2023
Good product, fast shipping, exactly what I ordered!
by: Gary 06/03/2023
Timely delivery great quality.
by: Walter 05/12/2023
Excellent. ! High quality parr
by: Jim 01/31/2023
wish this light would stop hitting things when i back up so i would not have to replace it so often.
25
345
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Installing New Trailer Light with 2 Wires in Place of Trailer Light with 1 WireYour old light must be a model that grounds through the mounting hardware. The new light has a separate ground wire. The white wire is the ground and it will attach to a clean metal surface. The black wire is the power wire.
view full answer... - Installing LED License Plate Light with Black and White LeadsFor an LED license plate lamp like part # LPL41CB, the black wire is connected to the running light circuit so that the plate is illuminated when the vehicle head lights are turned on, and the white wire is connected to ground.
view full answer... - Troubleshooting Trailer Causing Blown Fuses On Vehicle When ConnectedSince you said the fuses keep blowing with the trailer connected and they do not when the trailer is disconnected, this indicates there is a problem with a short on the trailer. You will want to start by inspecting the trailer connector, checking for any signs of bent or damaged pins and any signs of corrosion. Then you will want to make sure the trailer connector ground is attached to a clean, bare metal surface. Then check the wiring all the way back to the tail lights. Check for signs...
view full answer... - How to Install Trailer Light with Two Wires on a Trailer that Only Uses One WireTrailer lights that only have one wire are designed to ground through the mounting hardware of the light. So signal is carried to the single power wire of the light and then it grounds through the mounting hardware. If you go to install a light that has two wires you'd then need to take and attach the extra ground wire to the frame of the trailer and it will also ground through the trailer frame like it needs to.
view full answer... - Taillights Stop Working when Incandescent Light Connected to Running Light Circuit w/ LEDsIt sounds like adding the incandescent light could be causing too much draw on the circuit. In this case I recommend using a light like the Optronics Heavy Duty LED Trailer License Plate Light, # LPL41CB, which would draw just a fraction of the power of the incandescent light.
view full answer... - Where to Run White Wire When Replacing License Plate Light with Light that Has Single Power WireRun the white wire on your trailer to the mounting bolt of the new license plate light. Your current light ground through the mounting hardware so you'd just need to connect the ground wire there and you'd be good.
view full answer... - Solution for Trailer Light Grounded to Frame that's Not ActivatingTypically grounding a trailer light to the frame is enough to allow the light to activate. Since this is a golf cart application I'd recommend trying to run the ground wire of the light directly to the negative side of your battery and you should see it work like it should.
view full answer... - Can the LED Heavy Duty Trailer License Plate Light # LPL41CB Ground Through Mounting HardwareThe LED Heavy Duty Trailer License Plate Light # LPL41CB that you referenced is designed to ground to a ground wire circuit. You can ground it through the mounting hardware, but you would need to cut the white wire shorter and then strip it back so that you could insert the core of the wire between the mounting bracket of the light and the trailer frame.
view full answer... - LED License Plate Light RecommendationYes we do, for an LED version of the Stud Mount Trailer License Plate Light # LP41CB that you referenced you would want the LED Heavy Duty Trailer License Plate Light # LPL41CB. I attached a review video for this product for you to check out also.
view full answer... - Recommended License Plate Light for Rola Cargo Carrier # 59502To illuminate your license plate I recommend the Optronics LED Trailer License-Plate Light with License Plate Relocating Mounting Bracket # LPL55CB for your Cargo Carrier. If you already happen to have a license plate bracket and just need the light then I would recommend the LED # LPL41CB. LEDs will last longer and draw less amperage than traditional incandescent lights. I have linked the mentioned products and an installation video for your convenience.
view full answer... - Mounting License Plate Lamp VerticallyAs long as the DOT regulations in your state allow a vertically mounted license plate light, you can certainly mount the lamp in a vertical rather than a horizontal orientation. We also offer the same lamp in an LED version, part # LPL41CB. LED lamps will draw only a fraction of the power of a comparable incandescent bulb, but will last much much longer.
view full answer... - Trailer License Plate Light that Mounts in Holes Spaced 3-1/4 Inches Apart on CenterLicense plate light # LP51CB is one option for your trailer. Its mounting holes are also spaced 3-1/4 inches apart on center. If you want the LED version it is # LPL41CB. I have linked a video featuring this light for you.
view full answer... - Is the Bargman Surface Mount LED Double Tail Light Available with an Integrated License Plate LightAt this time there is not a version of the Bargman LED, Surface Mount, Double Tail Light, # 47-84-610, that incorporates a license plate light at the bottom of the housing. We do have a solution for you though. You could install the Bargman lights that you like and then install an LED license plate light like the LED Heavy Duty Trailer License Plate Light, # LPL41CB, or the LED Mini Trailer License Plate Light, # LPL31CB, above your license plate. If you need a bracket to attach the license...
view full answer... - LED License Plate Light for a 2007 Triton Elite 101x20 TrailerWe only have 3 clear lens, white light LED lights for license plates. First is # LPL31CB. I have included a link to a video review of it for you. We also have # LPL41CB which will be brighter because it has 5 diodes. And then there is LED light with bracket, # LPL55CB.
view full answer... - Trailer Lighting Issue After Installing LED-Type License Plate Light on Toy HaulerGenerally a trailer light's ground wire will be white in color, so it sounds like you installed the LED light correctly. LED lights use only a small fraction of the power required by standard incandescent lights, so it is not likely to be an overloading issue; also, there is not usually any issue mixing LED and standard bulbs. I do not see any way that the trailer would be able to affect the Tundra's instrument cluster (let alone its traction control); I do not think these issues are related. First...
view full answer... - Availability of LED License Plate LightsWe do have some LED license plate lights. You could use # LPL31CB or # LPL41CB. I have included some links to video reviews for each of these lights for you.
view full answer... - Is the LED License Plate Light and Bracket, Part Number LPL55CB Constructed of Metal or Plastic?The bracket on the LED License Plate Light and Bracket, part # LPL55CB is constructed of durable plastic. A steel bracket with the LED lights is not offered, but the bracket part # LP20SB and the LED light, part # LPL41CB can be purchased separately but used together.
view full answer... - Replacing a Rusted License Plate Bracket with a Plastic License Plate Holder on a Cargo TrailerYou can certainly replace the license plate bracket on your cargo trailer. I am guessing the license plate mounting screws are the part that is rusted. To remove them, you may want to use a drill to remove the screws or just break the heads off of the license plate screws to remove the license plate. Since you will be replacing the license plate bracket, you will not need to reuse the rusted screws or bracket. Once the screws and bracket are removed, you can install the Optronics Cargo...
view full answer... - Are LED Trailer lights More Durable than Incandescent Light BulbsLED lights are more durable and can withstand more shock than incandescent bulbs. Regular bulbs are pretty fragile by comparison. That is not to say that the LEDs are indestructible but they will hold up better than regular bulbs when shock is applied. It sounds like you need something like # RA-27C to help with lifting and lowering the gate. I have included a link to a video that shows how it works.
view full answer... - LED License Plate Light Recommendation for Use with Bracket # 30-62-030Nothing LED we offer is going to match perfectly with the mounting bolt holes of the # 30-62-030 that you referenced so we don't really have a great solution. The part # LPL41CB could be used with it I am sure, but it's mounting holes are 3-1/4 inches apart whereas the bracket you mentioned has holes that are 1-3/4 inches apart. You'd have to mount the light above the bracket.
view full answer...
- Replacement LED Availability of the LED Heavy Duty Trailer License Plate Light # LPL41CBI checked with Optronics and there isn't a replacement LED available for the LED Heavy Duty Trailer License Plate Light # LPL41CB. You would need to replace the entire unit. Which when you consider that most replacement LEDs are more expensive than this whole unit it's not a bad deal just replacing the whole thing. If you had the incandescent bulb version of this light you could replace the bulb with a # A194B.
view full answer... - Recommended Trailer License Plate Mount With LightThe LED Trailer License-Plate Light w/ Mounting Bracket, 2 Wire, 5 Diode - Clear # LPL55CB is made of a molded plastic. If you are interested in a metal bracket I recommend the Peterson License Plate Light with Bracket # PM436B which has an incandescent bulb. You alternatively use the can use the metal mount # LP20SB along with the LED Heavy Duty Trailer License Plate Light, Ear Mount, 5 Diode - Chrome Plated # LPL41CB.
view full answer... - Recommended Bracket and Light for Mounting License Plate Vertically on Boat Trailer FenderI like the suggestion about installing the plate at a 90º angle to the fender. We don't offer a purpose-built plate bracket/lamp that will perfectly fit the radius of your fender, but if you were to bend the plate to conform to the fender use a lamp such as part # LPL41CB and install it next to the plate on the fender it would work pretty well. A typical license plate in the US measures about 12x6, and the lamp measures about 1-3/4 inches wide when mounted on the vertical plane. If the...
view full answer...
- Availability of LED-Version of Petersen License Plate Light # M439KPeterson does not offer an LED-type version of their incandescent License Plate Light # M439K but Optronics does offer their # LPL41CB, which is a Heavy Duty Trailer License Plate LED Light. This unit is also an ear-mount type, features a chrome-plated housing, 5 LEDs and a 2-wire hookup. I have linked a review video for your reference. The mounting hole spacing on the # M439K is 2-3/4-inches center-to-center. The mounting hole centers for the Optronics light are spaced at 3-1/4-inches....
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Nicholas E
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Installed by:
Kathleen M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bob C.
11/15/2017
Trailer Lights still work great. A nice addition to my enclosed trailer. I would purchase them again if I had too.