Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics LED license plate light kit with the bracket and the included grommet. This is a three quarter inch sealed waterproof LED license plate light. It is SAE and Department of Transportation compliant. It features a really nice polycarbonate lens and housing that's very strong and durable. This light contains a total of two LEDs. LEDs are great replacements for incandescent lights.
They last longer, burn brighter, and they're much more efficient, and you don't have to worry about replacing bulbs or worry about fertile filaments. It is a two wire design, so you have your white wire and your black wire. White is for ground, black is for power. You'll also notice that it features the .180 nail bullets on the end of each wire. These can easily be removed for hard wire applications.
It does come with the bracket, and the light's mounted in there with a nice grommet, so the bracket has two mount holes. Mounting hardware not included. These mount holes are separated on center by 1 13/16 of an inch. It's a really nice design. Once it's installed, it'll stick out from the installation surface by about 1 3/4 inches.
Edge to edge going this direction measures about 2 1/8. Edge to edge this direction, just measuring the housing here at the base is about one inch. If we do include the lens, it increases that measurement to about 1 3/8 of an inch.We're gonna go and hook it up to power; that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead light so you can see it in a lower light setting. When it comes to the power draw at 12.8 volts, we're looking at 0.030 amps.
Optroics does put a lifetime warranty on their LEDs. It's got two LED design, so the multi-dial design really helps to optimize the overall light output. As you can see, it sends out a nice, bright, consistent signal. That's gonna do it for today's look at the Optronics LED license plate light kit.
Average Customer Rating: 4.7 out of 5 stars (30 Customer Reviews)
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.I was concerned that this one single LED fixture would be enough to illuminate the license plate on our boat trailer. I was pleasantly surprised to find that it does the job very well.
There are many colors of LED bulbs, however I was disappointed in the amber hue or Kelvin (4300K) color of this light.
Jenny N.
12/30/2021
I checked and of our submersible round LED license plate lights I do not have one to offer that would be a brighter white.
Excellent product
Very satisfied and it is a very good led light.This led light you can use two screws to mount it up any where.
Donald B.
6/23/2019
Very good product and very satisfied
Really good tag light. First one I've found that has a very even pattern of light(though it is a little on the bright side). Most led tag light have a beam projected for each led...not this one. Very sturdy and appears well made.
Very satisfied with the product and very good led light.
Donald
7/23/2019
Great
Great service at e-trailer
It illuminates the license plate very well. simple and easy to install.
Good replacement light.
Products were as ordered and as needed. Self rewire project went very well and has functioned flawlessly.
Will be installing 2 of these on a 53' drop deck. Should work, one thing I would like to see would be a grommet to seal the wiring penetration.
Nice and bright enough to illuminate the plate. Have not submerged yet so cannot speak on that, but should be fine.
Fast delivery, great looks and functionality, fast and easy install
Good product
Works great!!!
Great service will be back again!!
Best service I've ever received from an online retailer!
Great price, great customer service, prompt delivery!
LOVE YOUR SELECTION AND PRICES
great service they shipped my item in the next 30 mins after i completed my purchase
thank you
excellent service
Good Quality
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Charlie
7/4/2019
I am still happy with this purchase and would recommend it to future buyers.