2-3/4" x 1-7/8" x 2". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount on 1-3/4" centers with included studs. 2-Wire pigtail with power and ground. Studs included.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics LED Trailer License Plate Light. This light angles downward to illuminate your trailer's license plate. It features durable surface-mount technology when it comes to the construction of the LED circuit board, that's designed to better withstand shock and vibration, and it allows for improved heat distribution. So, this is an LED system. LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient.
With LEDs, you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments.The unit features a nice black plastic housing with a clear lens, and it has white LEDs. It's completely sonically sealed, so it features a nice waterproof design. Mounts directly on the surface of the trailer with the included studs. Mounting nuts are sold separately. This can also be mounted directly to certain license plate brackets.
It features a two-wire design. White wire is your ground wire, black wire's for power. Now, it does have these female bullet connector plugs on them. If you don't want those on there, you can actually cut that off, strip back the wiring for hardwired applications, but again, white is ground, black is power. It is Department of Transportation compliant.
Again, it features a total of three LEDs or three-diodes. Taking a look at the overall measurements real quick, going edge-to-edge this direction gives us a measurement of about 2-7/8". Top to bottom is about 1-7/8", and then the overall depth, not including the studs but just the housing area, it's about 2" deep. The mounting studs are separated on center by 1-3/4".We're going to go ahead and hook it up to power, that way, you can see what it looks like with some power running to it, and then we'll also turn off our overhead lights so you can see it in a low light setting. You can see here that the light sends out a nice, strong, consistent signal.
Again, it's a three-diode design, so the multi-diode design really helps optimize the overall light output, and you can see how it sends light at a downward angle which would illuminate anything that's directly below the light. Power draw at 12.8 volts is 0.035 amps, and Optronics puts a lifetime warranty on the LEDs.That's going to do it for today's look at the Optronics LED Trailer License Plate Light.
Average Customer Rating: 4.8 out of 5 stars (13 Customer Reviews)
2-3/4" x 1-7/8" x 2". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount on 1-3/4" centers with included studs. 2-Wire pigtail with power and ground. Studs included.Even though the item was out of stock and had to be ordered I do not blame the company for the delays involved after placing my order, especially pre Christmas time with the post office crunch for all retail sales. However, I have no complaint about the excellent service and communication I've received from etrailer.com. They stayed on top of my inquiries and kept me informed throughout the order process. I was trying to find an exact match for a license plate light/lamp for a Motorcycle Cargo Camping Trailer that was over 30 years old and they were the only ones who had it available after searching thoroughly for it high and low. I would definitely buy from this website again. After doing business with them they have gained my trust and respect. It's the people who stand behind their word and follow through that makes a company great. I truly appreciate their greatness.
The light package looks good. This will be the third time I am replacing this light. That’s because they fail due to rain water from the roof rusting out the component. This new light assembly looks like it has good protection from getting wet. Thank you for excellent delivery service.
Had a trailer that had a light below the license plate. Lens kept coming loose and falling out. This sealed unit will work a lot better.
Exactly what I needed. Very fast ship. Thanks.
great product
Seems like a great product. Fast delivery. Will replace one that got damaged by rain and road-salt.
Well-built product
Nice sturdy replacement. Back plates and lights on trailers sometimes get abused. This one looks like it will hold up!
I received this product on time and easily installed it and it works perfect. Thanks for your review interest.
Quick easy install.
Great price and service.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.