To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get a brake controller in your truck that looks like it's supposed to be there. This sleek knob blends right into your dash and makes your settings simple and convenient to adjust.
Features:
Specs:
Note: The main unit must be mounted horizontally level and parallel to the direction of travel within 20 degrees.
Power output: To get more power output - the maximum amount of power that will be applied to your trailer's brakes - rotate the knob clockwise. To decrease the power output, rotate it counterclockwise.
Manual override: To engage manual override, simply press the knob. This will activate the trailer's brakes and brake lights independent of your tow vehicle, great for stopping sway or controlling your trailer's momentum in an emergency. The Voyager iD will reach the maximum set power in half a second.
The Voyager comes in 2 pieces: the main unit and the control knob.
The control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. Before you do any drilling, be sure there's enough clearance behind the dash for the entire knob to install!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. It needs to be horizontally level and parallel to the direction of travel within 20 degrees. A mounting kit with hardware is included.
This kit comes with a vehicle-specific wiring harness that plugs right into the factory port beneath the dash of your vehicle. That means no hardwiring!
You will also need a circuit breaker kit to complete your installation:
Note: If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately).
Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Voyager iD uses an internal inertia sensor to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hola neighbors, it's Brad here at etrailer, and today, we're taking a look at the Tekonsha Trailer Wiring Harness Adapter for your Tekonsha brake controller on a Nissan or Infiniti SUV. So this is gonna work with your Armada and also your Q series SUVs, and it's gonna work pretty easily by simply just plugging into the factory tow package, and this other end is gonna allow you to plug into your Tekonsha or Draw-Tite style brake controller, making this a plug and play installation super easy. Now, if you have a Tekonsha brake controller like we have here, we have a Prodigy P2, they have a very similar connector to a bunch of the different Tekonsha brake controllers as well as the Draw-Tite. And this harness is gonna allow us to simply snap this into place here, and then this portion will plug in directly to our tow package, which is gonna be located under the dash. Now, to find your plug, it's gonna be pretty easy. Now, I have this portion of our panel dropped down, you don't need to do that, I'm just doing this to make it a little bit easier for you to find it.
And what you're gonna be looking for is kind of right at the steering column, you're gonna see that we have just the steering column here, but also, a white plastic box here. And you're gonna reach for a thick wire loom, and taped to it is going to be a white plug, and this white plug is gonna correspond with the other side of our harness here. So pretty simple, we'll just plug this in. And as soon as I plug that in, you can see that we have NC, which is not connected to our trailer, but we have power to our brake controller, so all that's really left to do is get this mounted up underneath our dash and we're ready to go. So this is super easy if you have that factory tow package to get your brake controller working properly.
Now, this is gonna be compatible with time delayed brake controllers, so that's gonna be your Draw-Tite Activators as well as the Tekonsha PowerTrac, and also, proportional brake controllers including the Prodigies as well as the Primus and the Voyager. So if you're looking to get your Tekonsha or Draw-Tite brake controller hooked up then start to tow with those trailer brakes, this is gonna be a super easy quick way to get that ready to go and you'll be towing in no time. So overall, this maybe takes about five minutes to get installed, and it's just, again, a plug and play, easy way to get it hooked up. And that was a look at the Tekonsha Brake Controller Wire Harness Adapter..
Easy install simple setup
Everything worked as it should! Very happy with the look as well
Works good
The install was pretty simple. It took some time to modify the knock out plug to conceal the adjustment knob but after a bit of work it fit nicely and looks like it’s supposed to be there. I missed a photo of the final mont of the control unit but I was able to install the supplied clip for the module just above the airbag. There is a clip that holds the wire for the computer input so I removed it for extra space and secured the wire with a zip tie.
Easy install. I used the cable harness that came with my 22 Silverado. Hardest part was just locating a place on the dash for the knob and access from behind for the 2 inches or so length of the switch assembly. Small and looks good on the dash.
worked great!
Plug and play! Easy as it gets.
The right tool for the job
Very easy to install.
Snapped right into my wire in 1 minute.
Makes for a very easy install.
Works great and easy install.
Plugged right in and away I went.
Offers great products and fast shipping service!
Special Nissan electric pig tail plug right in.
Great Product- simple installation- everything as promised!
ETrailer always has just what I need and great follow up service for any questions I have had. Thanks to your whole team!
I bought this as a package with my brake module. Didn't even remove the tywrap. plugged everything in and it works!
The product arrived in a timely manner. The item was as described.
It fit my 06 Nissan Titan like original equipment.
Much, much simpler to have a "plug & Play" than to do the wiring yourself. Excellent product and above excellent staff.
Product is basic... Service from eTrailer is EXCELLENT! Gold medal service from everyone.
Do you have a question about this Trailer Brake Controller?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.