Parts Needed to Install Tekonsha Voyager ID on 2020 GMC Yukon

Question

Question:

I have a 2020 Yukon with tow package. Which voyager id is right for this vehicle?

asked by: Clay

0

Expert Reply:

Hey Clay, to install a Tekonsha Voyager Id in your 2020 GMC Yukon you would need the part # TK26BR for the brake controller and then the part # 3016 for the install harness and you'd be set. What will you be towing?

expert reply by: Jameson C

0

Answer 1

Hey Mike, thanks for reaching out! It sounds like your 2025 Toyota Sienna doesn't have any wiring at the back so you'll need to install the T-One Wiring Harness #TK69FR along with the Universal Wiring Kit #ETBC7. This will give you all of the…

view full answer...

Answer 2

Hey Josh! The Tekonsha Voyager iD Brake Controller #TK26BR comes with a universal wiring harness. Since you have the factory tow port you can use the Tekonsha Plug-In Wiring Adapter #3016 for a plug and play installation. I see you also looked at the…

view full answer...

Answer 3

The #HM42190 is a replacement wiring harness for a Wrangler Unlimited that's already equipped with a 7-way. If you don't have the OEM 7-way, the connector won't be present. To convert your existing 4-pole to t a 7-way, use the #37185…

view full answer...

Answer 4

Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle. First let's start with a brake controller. I would recommend the Prodigy P2 Brake Controller part #90885. This is our best…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 8

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 9

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 10

Hey John, thanks for reaching out! Before I dive into it, I just want to throw it out there that the Curt Spectrum #C36QV, Tekonsha Voyager iD #TK86DR, and the Redarc Tow-Pro Elite #RED65CR are all great brake controllers and you'll be happy with…

view full answer...

Answer 11

Hey Steven! I'm happy to report that the Redarc Tow-Pro Liberty Brake Controller #RED52VR will fit your 2017 Colorado. Sometimes when there is no custom wiring harness our fitguide picks up vehicles and says it is not a fit. I apologize for any…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Parts Needed to Install Tekonsha Voyager ID on 2020 GMC Yukon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching