Recommended Towing Setup For a 2021 Chrysler Pacifica Hybrid

Question

Question:

Can I equip my 2021 Chrysler Pacifica Hybrid electric V6 Van to tow a small travel trailer about 3000 lbs

asked by: Sherri S

0

Expert Reply:

You sure can Sherri! You're going to need install a hitch, a couple of wiring harnesses, a brake controller, and a ball mount on your 2021 Chrysler Pacifica Hybrid. I have listed all of the parts you'll need below.

Hitch - etrailer Hitch item # e98903

4-Way and 7-Way Harness - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK96FR and Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat item # ETBC7

Brake Controller - Tekonsha Voyager iD Brake Controller item # TK26BR

Ball Mount - etrailer Ball Mount w/ Pre-Torqued 2" Ball item # e38NR

What kind of trailer are you going to be pulling?

expert reply by: Jerred H

0

Sherri

9/6/2025

Thank you I will purchase these from you. I am so glad I checked with etrailer because others tried to disuade me.

Jerred H.

9/6/2025

@Sherri You're welcome! I'm glad you did too. Let me know if you have any other questions.

Answer 1

Hey Nathan, yes the TowSmart hitch part #TS54ZR is similar enough to the Curt #C12180 that you could use it's install video as a guide for the install of it. This hitch does also come with bolt leaders as well to help get the install hardware…

view full answer...

Answer 2

Hello Shara, thanks for reaching out. I see that you already ordered the #e98903 hitch which is for the 2025 Pacifica, but I wanted to reply anyway to make sure all your questions were answered. To answer your first question, we do have a video…

view full answer...

Answer 3

I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118712 for your 2018 Chrysler Pacifica Touring L. The harness is custom designed for your Pacifica and plugs into existing ports behind the driver and passenger…

view full answer...

Answer 4

We have all of the parts you need! To be able to tow a trailer with your 2021 Chrysler Pacifica non-hybrid that does not have the tow package you will need a trailer hitch receiver, a vehicle wiring harness, and a ball mount, hitch ball, and hitch…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Towing Setup For a 2021 Chrysler Pacifica Hybrid

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching