Recommended 3500 lb Replacement Axle, Leaf Springs, And Hardware For Pop-Up Camper
Published 04/05/2017
Products Featured in This Question
Question:
Thank you for your advice. However this axle will not fit my application. Having removing it and measuring it, my axle has a 2800lb capacity, measures 65 inches from inside of the flanges, aprox 84 inches from face of hub to face of hub. The spring center mounts are 53 inches, and the springs are 3 leaf, and measure 21 inches from eye to eye. Could you recommend an axle, leaf springs and hardware based off this info? Thank you for your time.
asked by: Jason
Helpful Expert Reply:
For your pop up camper, I recommend the Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs # e43SR. You will want to measure to ensure that this is the correct fit with the leaf springs at 74 inches from spring center to spring center. This axle has the brake assemblies and hub and drum assemblies already fitted, so you will just need to assemble and install.
For leaf springs, you will want to measure from center of spring eye to center of spring eye. We have 3 different size options for you:
3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long # e59SR
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long # SP-210275
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long # e54SR
For the hardware, I recommend the Shackle Bolt with Locknut for Double-Eye Springs - 3" Long # 166081 for your leaf springs and the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts # APUBR-1 for your axle
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Search Results: trailer axles
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Search Results: accessories and parts
- Search Results: electric breaks
- Search Results: exterior screws
- Search Results: fender screws
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Video: Comprehensive Review: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles
- Q&A: Torque Specifications on Lug Nuts, Leaf Springs, and Equalizers.
- Video: Dexter Nev-R-Adjust Electric Trailer Brakes Feature Review
- Shop: Mud Flaps
- Video: How to Install the WeatherTech Mud Flaps on a 2019 Ford F-350 Super Duty
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Shop: Truck Mud Flaps - Black Rubber - 12" Wide x 18" Tall - Qty 2
- Shop: WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Rear Pair
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Q&A: How Tight Do Leaf Spring Bolts Need To Be?
- Video: Review of LaSalle Bristol RV Waste Valves - Drain Valve RV Fresh Water Tank 1-1/2 Inch - LSB44AR
- Q&A: Recommended Leaf Spring Bushings and Shackle Bolt with Locknut
- Q&A: Replacement Suspension Bolts For A 3,500lb Axle
- Q&A: Recommended Solution for Shackle Bolts That are Backing Themselves Out
- Q&A: Can Nylon Bushings for Trailer Suspension be Used with Wet Bolts
- Q&A: What Holds Nut of Shackle Bolt With Lock Nut in Place
Jason
4/5/2017
Thank you for your advice. However this axle will not fit my application. Having removing it and measuring it, my axle has a 2800lb capacity, measures 65 inches from inside of the flanges, aprox 84 inches from face of hub to face of hub. The spring center mounts are 53 inches, and the springs are 3 leaf, and measure 21 inches from eye to eye. Could you recommend an axle, leaf springs and hardware based off this info? Thank you for your time.