bing tracking image
  1. Trailer Axles
  2. Timbren
  3. 5200 lbs
  4. Universal Fit
  5. Spindles Only
  6. Lift - 4 Inch
Timbren Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Off-Road Tires- 5,200 lbs
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Timbren

Timbren Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Off-Road Tires- 5,200 lbs

Part Number: T99GR
In Stock
$1,475.55
Trailer Axles
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
The Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units replace your existing axle and operate independently. 4" Lift spindle allows for maximum ground clearance. Fits any frame width. Great Prices for the best trailer axles from Timbren. Timbren Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Off-Road Tires- 5,200 lbs part number T99GR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (5)
  • Q & A (0)
  • Photos

Timbren Trailer Axles - T99GR

Highlights

  • 4" Lift Spindles: Raises the trailer for better ground clearance on rough or uneven terrain.
  • 5,200-lb Capacity: Handles heavy loads while maintaining stability and control.
  • AEON Rubber Springs: Absorb road shock for a smoother, quieter ride under any load.
  • Independent Suspension Arms: Reduce roll and sway so the trailer tracks straight and steady.
  • EZ Lube Spindles: Make bearing maintenance quick and clean with easy-access grease fittings.
  • No Thru-Axle Design: Maximizes space and clearance while fitting trailers of any frame width.

Features to know about

More Clearance When You Need It: 4" Lift Spindle Handles Off-Road Tires

Tight driveways, rocky trails, and steep ramps are no match for the 4" lift built into this Axle-Less suspension. With room for tires up to 35" x 12.5" x 20", it gives the trailer the ground clearance it needs for off-pavement use. The design eliminates the thru-axle completely, so you get full clearance from front to back without anything hanging low to snag.

Timbren Axle-Less Trailer Suspension System with 4-inch lift installed on trailer frame showing high ground clearance and rugged off-road capability

Smooth Ride on Any Load: AEON Progressive-Rate Rubber Springs

Rough roads, potholes, and uneven weight don’t throw this setup off. Each side rides on AEON progressive-rate hollow rubber springs that absorb road shock and automatically stiffen as load increases. The rebound spring keeps constant pressure on the arm to cut rattle and bottoming out. Whether loaded heavy or running empty, it rides smoothly and quietly without the harsh bounce of leaf springs.

Component parts of Timbren Axle-Less Trailer Suspension System including AEON main spring, rebound spring, control arm, and spindle shown in detail

Comparison of Timbren Axle-Less Suspension versus traditional leaf spring setup showing smoother ride and reduced bounce

Independent Suspension That Tracks Straight

Each wheel works on its own, so bumps on one side don’t send the whole trailer rocking. Built-in camber and toe-in keep things aligned so it tracks straight and wears tires evenly. The AEON springs compress vertically instead of twisting like a torsion axle, which keeps stress down on suspension parts and makes cornering more stable with less roll.

Side-by-side comparison of torsion axle and Timbren Axle-Less Suspension showing improved clearance from front to rear of trailer

Built Tough for Heavy Loads: 5,200-lb Capacity Steel Construction

This system is rated for 5,200 lbs and built from heavy-duty steel with a black powder coat finish that resists rust and road wear. The EZ Lube spindles make greasing simple, and if a spindle ever gets damaged, it can be removed and replaced without changing the whole unit. It’s a strong, serviceable setup that’s ready for long miles under load.

Simple Bolt-On or Weld-On Installation Options

No custom axle fabrication needed—each unit bolts or welds directly to the trailer frame. If there’s no crossmember where you’re mounting it, a piece of 2" x 3" steel tubing can tie both sides together using the built-in holes for added strength. Three clear install methods make it easy to reinforce your frame and get everything square so alignment stays right from the start.

Installation option one for Timbren Axle-Less Suspension using 2x3 inch steel tubing through integrated hole for added trailer frame support

Timbren Axle-Less Suspension installation option two using fabricated inboard extension plate for frame connection

Timbren Axle-Less Suspension installation option three showing hanger bolted to trailer frame and existing crossmember for secure fit

Specs

Compatibility

  • Fits: 1-axle and 2-axle trailers that use low-pressure, off-road tires
  • Maximum tire size: 35 x 12.5 x 20
  • Not recommended for: triple-axle applications
  • Works with: Dexter 5,200-lb hubs (8-201-5UC3-EZ and 8-213-5UC1-EZ - sold separately)

Weight and Capacity

  • Weight capacity: 5,200 lbs

Quantity

  • Quantity: 2 suspension units without hubs

Spindle/Hub Compatibility

  • Bearings: 25580 inner / 15123 or LM67048 outer
  • Seal inner diameter: 2.250"

Warranty

  • Warranty: 3-Year limited warranty

Note

  • The Timbren Axle-Less suspension system may require additional support on your trailer: If your trailer does not have a crossmember above the spot where you want to install the Timbren system, you may need to reinforce the frame.
  • You can accomplish this three ways:
  • Retrofit the trailer with a crossmember.
  • Build out the trailer frame.
  • Use 2" x 3" steel tubing to connect the 2 Timbren suspensions together using the built-in hole on each unit.

Technical diagram of Timbren Axle-Less Suspension installation showing A and B measurement points for correct alignment on trailer frame

  • A and B — distance measurements that should be within 1/8 inch of each other before mounting the units.

Technical dimensional diagram of Timbren Axle-Less Suspension showing measurements with electric drum brakes installed

Technical line drawing showing dimension points for Timbren Axle-Less Suspension to assist in accurate installation

Detailed measurement diagram of Timbren Axle-Less Suspension system showing side and top dimension references

Final dimension diagram of Timbren Axle-Less Suspension showing precise spacing and alignment measurements

ASR52HDS04 Axleless Trailer Suspension System by Timbren - 4" Lift Spindle - Without Hubs - Wide Tires - 5,200 lbs

Installation Details T99GR Installation instructions



Ratings & Reviews

4.8

5 reviews
5 Stars
(4)
4 Stars
(1)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
by:
by:
by:
this took a while to get as it was backordered, but abbey and the entire etrailer staff were excellent on giving updates + status. great product, great service, 0 complaints. this is the second set of timber axle-less suspension i have owned and i may never use a standard axle for a trailer ever again. the trailer i put a 3500HD system on has over 30,000 mi with zero issues. it just flat works.
by:
5
5
true

See what our Experts say about this Timbren Trailer Axles


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Steven C
Installed by:
Steven C
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Ryan F
Written by:
Ryan F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924