Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings

Published 05/02/2019

Products Featured in This Question

Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs

(151)

$201.48

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2

(1077)

$138.29

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

(117)

$62.80

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5

(1077)

$129.67

Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs

(111)

$1153.50

Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K

(25)

$1497.09

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1741)

$100.78

Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased

(1741)

$118.47

Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs

(126)

$1069.96

#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter

(165)

$95.58

#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter

(120)

$85.60

Question:

I have a dexter axle that has had bearings and spindle chewed up , I have the hubs they are 5x5 they use 10-19 seal inner bearing of 68149 ,and outer bearing of 44649 the axle I have is a dexter axle numbers on the tag are p-21 model- SLR and s/n D 7020847 center of spring seat to center of spring seat is 76 inches , from what I can measure hub to hub is 91 inches I do not want to spend 600 + for differant axles I just want the same axle I have

asked by: Josh

Expert Reply:

I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # AKHD-545-35-EZ-K if you have the grease zerk integrated in the spindle.

Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend using the Timbren Axle-Less Trailer Suspension System. This will replace your axle and your suspension allowing custom lengths with assemblies that attach directly to the trailer frame. Then you will need a 2 inch square bar not included to span the assemblies using the integrated holes.

Here are a few of the options:

Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs -5 on 4-1/2 # A35RS545E
Timbren Axle-Less Trailer Suspension System w Hubs -5 on 4-1/2 # A35RS545
Timbren Axle-Less Trailer Suspension System - Straight Spindle Only # ASR3500S05

If you need a lift or drop spindle or a different hub bolt pattern I've attached a link to assist.

expert reply by: Jason S

Josh

5/2/2019

Jason S.

5/2/2019

I definitely understand not wanting to replace an axle if it isn't broken. I can help with parts and a spindle that can be welded in place on your current axle, but the manufacturer doesn't make that specific axle any longer so I can't give you an exact fit replacement. I understand that would be ideal but unfortunately not a possibility. The Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased # 84550BX are the correct fit as are the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 # 84556UC3 or EZ lube # AKHD-550-35-EZ-K. For the spindle replacement you will use the EZ Lube Spindle # TRU74FR or the standard Spindle # TRU84FR. Installing a spindle does require precision so it is recommended to have a professional welder do the installation.