Replacement Axle for Cargo Express CE610XL Trailer or Adding Brakes to Current 3,500 lb Axle

Published 09/19/2018

Products Featured in This Question

etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K

(3292)

$153.82

10 Gauge Wire - Blue Primary - Per Foot

(109)

$1.61

Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID

(72)

$1.27

Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K

(27)

$1478.57

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1340)

$91.22

Mounting Hardware for 10" Brake Assemblies

(433)

$19.51

Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5

(1180)

$8.69

Question:

You do not need to replace your axle. If you have brake flanges on your current axle, then you can simply add the brake assemblies, hub/drum assemblies, and wiring and be good to go. The 3,500 lb axles are all the same spindle measurements so I recommend the following parts: Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA Mounting Hardware for 10" Brake Assemblies # BRKH10B Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5 # DW05745-5 Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K etrailer 7-Way Molded Trailer Plug with Junction Box # e99011 # 10-1-1 wiring sold by the foot and ring terminal # 44-5310A If you want to replace your axles, then the best option we have is the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E. These assemblies will replace your current axles, suspension, and will be a custom length. You will need to use a 2x2 inch square bar (not included) to fit in the integrated assembly holes. You will still need to wire the assemblies with the parts listed above.

asked by: Rob M

Expert Reply:

You do not need to replace your axle. If you have brake flanges on your current axle, then you can simply add the brake assemblies, hub/drum assemblies, and wiring and be good to go. The 3,500 lb axles are all the same spindle measurements so I recommend the following parts:

Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA
Mounting Hardware for 10" Brake Assemblies # BRKH10B
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5 # DW05745-5
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K
etrailer 7-Way Molded Trailer Plug with Junction Box # e99011
# 10-1-1 wiring sold by the foot and ring terminal # 44-5310A

If you want to replace your axles, then the best option we have is the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E. These assemblies will replace your current axles, suspension, and will be a custom length. You will need to use a 2x2 inch square bar (not included) to fit in the integrated assembly holes. You will still need to wire the assemblies with the parts listed above.

expert reply by: Jason S

Rob

9/19/2018

Jason S.

9/19/2018

We don't have a through-axle available that meets your hub face to hub face or spring seat center requirements. The Dexter # 8327812-EB you referenced will not fit your frame with 89 inch face to face measurement and 74 inch on center spring seats. Your best option is the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E which has the integrated suspension and the EZ lube spindles. This is a universal fit system that will require a 2 inch square bar between the assemblies utilizing the integrated holes. That bar is only required if there is not a frame Crossmember at the mounting location.