See what our Experts say about this etrailer A-Frame Trailer Coupler

• Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball
  I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch ball. I recommend replacing your coupler with the A-Frame Trailer Coupler - Yoke Latch # CA-5210-B which is the same style of coupler that you have now.
  view full answer...
• Availability of Coupler Repair Kit for Discontinued Atwood Coupler
  Hi Andy; Atwood has been gone for quite a while now so their couplers and repair kits are no longer around. The best option is to replace the coupler on your trailer. I recommend the Demco A-Frame Trailer Coupler # DM14793-81. This uses the eZ latch which makes for a quick and simple hookup and disconnect. It is also available in silver # DM14793-52. If you're looking for a more economic option we have the # CA-5210-B which is a weld-on coupler.
  view full answer...
• Can Yoke Style Trailer Coupler Be Repaired
  I do have an option for you but coupler repair parts aren't universal so if any of the internal latching mechanisms are damaged or worn on your trailer coupler then chances are high it will need to be replaced for which we offer the A-Frame Trailer Coupler part # CA-5210-B. This coupler will need to be welded to the frame for installation so a local shop is likely your best option for replacement.
  view full answer...
• Looking For Replacement A-Frame Jack Mount
  Hey Suede, thanks for reaching out. We do offer a replacement Bottom Support Plate # JSP-100 which can be welded to the frame. The top support plate is generally part of the coupler, like part # CA-5210-B for example. I hope this answers your question. Comment below if there is anything else I can do.
  view full answer...
• Is There A Repair Kit For Yoke Style Trailer Couplers?
  Hey Mark, so on those you will unfortunately need to replace the entire coupler. There are no repair kits available for the yoke style. Is yours defective and completely broken, or do you think there's a chance you can spray some lubricant in there and work it loose? If replacement is needed, you can look at sometime like A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs # CA-5210-B, or if you don't want yoke again, then the Demco Cast Head Coupler w/ Jack Hole...
  view full answer...
• Is it Normal to Have Play on Your Coupler?
  Hey, Joe. I just want to make sure I'm understanding what you're saying. When you hitch up your trailer and close the latch there is some play, but when you put the pin through the latch on the coupler there is next to no play? Are you referring to play on the latch or play between the coupler and ball? If the latch is really easy to unlatch it would be worn. There should be some sort of resistance to unlatch it. Coupler play is normal. The coupler needs to be able to glide on the hitch...
  view full answer...
• Will The Demco A-Frame Trailer Coupler DM14793-81 Replace The CA-5210-B Coupler?
  Hello Al, thanks for reaching out. The A-Frame Trailer Coupler # CA-5210-B and the Demco A-Frame Trailer Coupler # DM14793-81 are interchangeable. They both fit a 50" degree A-frame which is standard. I would be surprised to hear that your A-frame was anything other than a 50 degree but you could always take a measuring tool and check. As long as it is indeed 50 degrees the Demco # DM14793-81 will work great and will be a much more durable latch compared to the yoke latch. What kind of...
  view full answer...
• Adding Parking Brake To 2011 Earthbound Dakota Trailer
  The Dexter Electric Trailer Brake Assembly with Parking Brake - 10" - Left Hand - 3,500 lbs # K23-086-00 and the right side # K23-087-00 are a fit for your 2011 Earthbound Dakota. You will also want the Titan Breakaway and Parking Kit for Drum Brakes # T2385200. The maximum capacity you listed is for the combination of the axles not each axle based on what I see online as well as the 4 bolt mount on the axles and 5 bolt pattern you mention for the wheels.
  view full answer...
• How to Lock a 1970 Camper to Truck When No Hole Exists for Padlock
  Hey Beverly, thanks for reaching out! If your older coupler doesn't have a hole through it for a locking pin, then we'll either need to get you setup with a replacement coupler, like the A-Frame Trailer Coupler # CA-5210-B, or you'll need to carefully drill a hole through the latch on your coupler and use a pin lock like the etrailer Surge Brake Coupler Lock # e98888. Aside from that there just simply aren't any options that fit over your coupler while it's connected to your tow vehicle.
  view full answer...
• How to Determine Actual Weight Capacity of Tandem Axle Trailer
  Your trailer should have an identification/safety sticker that indicates its gross vehicle weight rating (GVWR) which is the most the loaded trailer can weigh. If it is a brand new trailer this will unambiguously tell you its capacity; if it was pre-owned it is possible replacement parts were installed. It does sound as though your trailer was over-spec on the axles (a total capacity of 7000-lbs) relative to the coupler on the trailer which you said is rated for 5000-lbs trailer weight....
  view full answer...
• Recommended Trailer Coupler Lock for A-Frame with Trigger Latch
  Do you have a photo of your trailer coupler? If it looks like the A-Frame Coupler part # CA5100B then yes, the Master Lock Heavy-Duty Coupler and Latch Lock Combo part # 3784DAT should work for you as that is what it is primarily designed to fit. I have attached a review video on a straight trailer coupler but it will also work on a-frame trailer couplers as well.
  view full answer...
• Availability Of Repair Kit For Yoke-Style Coupler Latch
  Hello Merrill, thanks for reaching out. I am sorry to say that we do not carry a latch repair kit for the yoke-style couplers like the # CA-5210-B. The only repair solution we can offer is a whole new coupler.
  view full answer...
• A-Frame Coupler and Trailer Jack With Caster for Boat Trailer
  Hey Kenneth! The difference in the coupler dimensions you're referring to won't make a difference. You can use the A-Frame Trailer Coupler # CA-5210-B to replace the old Atwood coupler on your trailer. I'm not sure what capacity you need but, as long as 1,200 lbs of lift is enough I recommend the Ultimate Trailer Jack # 322-RDJ-2K for a replacement. When the jack is retracted it has a bracket height of 1-3/4" so clearance will never be an issue. It doesn't come with a caster so you will...
  view full answer...
• Replacement 2" Couplers for Trailers
  Hi Jarod; you can email me your pictures and I'll see what we have. If you reply to the email with the link for this page it will come to me. Are you looking for an exact match to the style? If not, you could replace both with one like the A-Frame Trailer Coupler # CA-5210-B you were looking at or upgrade to a Demco with the eZ Latch # DM14793-81. Both fit a 2" ball and fit a standard A-frame.
  view full answer...
• Need A-Frame Welded Coupler For 2022 Wolf Pup 17JG
  Hey Mike, happy to help. For a welded A-frame coupler on your 2022 Wolf Pup 17JG, I recommend the following: - A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs # CA-5210-B This'll be a great option and a solid replacement for the factory coupler. With an 8,000-lb rating, it is well above the Wolf Pup’s GVWR, giving you plenty of safety margin. This coupler is designed for standard A-frame trailers and works with a 2" hitch ball. As long as your existing coupler...
  view full answer...
• Replacement Coupler for a 1992 Coleman Destiny Royale Trailer
  No sure what size coupler you have on your 1992 Coleman Destiny Royale trailer, but I can give you the dimensions of the item # CA-5210-B you were looking at to make sure it fits. I went out to the warehouse and measured the A-Frame Trailer Coupler item # CA-5210-B and the inside width of it measures 8-3/4". You'll want to make sure the spot on your tongue where the coupler installs is 8-3/4" for this one to work. If it's a bit less you can shim it but we'll need to go another direction...
  view full answer...
• Replacement Coupler Solution for Atwood Yoke Style Coupler with 15775 Part Number
  The AT15775 part that you referenced was a replacement latch repair kit from Atwood for yoke style A-frame couplers. This kit is no longer available as Atwood was bought out and their parts were discontinued. For a replacement yoke style coupler for 2 inch hitch balls, I recommend the etrailer.com # CA-5210-B. This is the same style of coupler that you have now.
  view full answer...
• Solution for A-Frame Trailer Coupler Yoke Latch Repair Kit
  The only repair option we have is total replacement with a coupler like the # CA-5210-B you were looking at. Unfortunately, we do not have a latch repair kit for this latch style.
  view full answer...
  
• Availability Of Replacement Latch For Atwood 88555 2 Coupler
  Unfortunately the Atwood coupler in your picture (appears to be part 88555) has been discontinued so there is not any latch kit or replacement parts available. At this point the only option we can offer is to replace the coupler entirely. The most similar coupler we offer is the A-Frame Trailer Coupler # CA-5210-B. This has the same 8,000 lb weight rating as the Atwood 88555 coupler. It also appears to be very similar in design. If you want to go with something a bit more heavy duty,...
  view full answer...
• Can Yoke-Style Trailer Coupler be Adjusted for Better Connection to Hitch Ball
  I took a look at our yoke-style coupler # CA-5210-B and there doesn't seem to be any type of adjustments that can be made for the coupler to sit more snug on the hitch ball. I would check to make sure that your coupler is cleaned out and free from debris and that you're using the correct hitch ball size for your coupler. For example, there is a 1-7/8" hitch ball and a 2" hitch ball. You wouldn't think that a 1/8" would make that much of a difference but it does.
  view full answer...
• Replacement Coupler For Discontinued Atwood 2" Yoke Coupler
  I recommend replacing your Atwood coupler with a Demco A-Frame Trailer Coupler # DM14791-97, as parts are virtually impossible to find for the older Atwood couplers. This will get you all new latch components that feature an EZ latch system. The coupler comes primed to protect against rust until you are able to have it welded on in place of the old coupler.
  view full answer...
• Availability of Repair Kit for Atwood Yoke Style Coupler
  The AT15775 part that you referenced was a replacement latch repair kit from Atwood for yoke style A-frame couplers. This kit is no longer available. Atwood was recently bought out and their parts are becoming more and more difficult to find, so your best option is likely to replace your coupler altogether. For a replacement yoke style coupler for 2 inch hitch balls, I recomend the etrailer.com # CA-5210-B. This coupler features overall dimensions of 13-3/4 inches long, 9-1/2 inches wide,...
  view full answer...
• Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball
  Atwood was bought out and their replacement parts are no longer available - including the repair kit you mentioned - so the best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch ball. There is a similar option with a yoke latch, the A-Frame Trailer Coupler # CA-5210-B. There is a bolt-on option as well if you'd like, the Demco A-Frame Trailer Coupler with Jack Hole - eZ-Latch # DM14793-81.
  view full answer...
• Recommended 2" and 2-5/16" A-Frame Couplers for an Older Trailer
  I took a look at your current situation and it's looking like there isn't going to be a replacement latch kit available unfortunately. Instead, you're going to need to replace the entire coupler with something like the A-Frame Trailer Coupler # CA-5210-B which is a weld-on style replacement that'll work with 2" hitch balls and has an 8,000 lb capacity. If you needed a 2-5/16" coupler, then the # CA-5400-B would be better suited for you. This coupler is also has a weld-on install and...
  view full answer...
  

Do you have a question about this A-Frame Trailer Coupler?