Product Experts Available Now!
Call 1-800-940-8924
Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
(229 reviews)
Price: $141.02
In Stock
Demco
Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
Part Number: DM13205-95
In Stock
$141.02
Retail:$157.04
You Save: $16.02
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (229)
- Q & A (0)
- Photos
Demco A-Frame Trailer Coupler - DM13205-95
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 21000 lbs GTW
- Auto Latch
- Standard Coupler
- 50-Degree Frame
- Demco
- Marine Grade
- 2-1/4 Inch Hole
A-frame coupler is made of sturdy steel and has a durable zinc finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.
Features:
- A-frame coupler lets you hook up your trailer to your tow vehicle
- Provides connection point for hitch ball
- eZ-Latch mechanism with corrosion-proof composite latch handle ensures simple, secure hookup and disconnect
- Lets you hook up when latch is in closed position - just drop coupler over hitch ball and latch will snap into place
- Heavy-duty steel construction
- Durable zinc plating offers corrosion resistance
- 200-Hour salt spray rating
- Bolt-on installation
- Cutout in top plate fits jacks with 2-1/4" diameter outer tubes
- Made in the USA
Specs:
- Application: 50-degree A-frame trailers
- Ball size: 2-5/16"
- Weight capacity: 21,000 lbs
- Overall length: 17-5/8"
- Diameter of lock pin hole: 5/16"
- Minimum span needed for pin lock: 3"
- 1-Year warranty
eZ-Latch Coupler
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the contoured handle and the coupler socket will automatically release its grip on the ball.
Sturdy, Corrosion-Resistant Construction
Made of sturdy steel, this coupler features a durable zinc coating that has a 200-hour salt spray rating, which is designed to limit rust and corrosion. The eZ-Latch's sleek, ergonomically designed handle is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
16680-95 Demco A-Frame Trailer Coupler with Easy Latch and Jack Hole - Zinc - 2-5/16" Ball - 21,000 lbs
Replaces Demco 13205-95
Similar to Bulldog BD44150WH301
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.7
229 reviews
by:
Terry
08/16/2025
Love them! I have them on my dump trailer and my enclosed cargo trailer. Love the latch feature. No more non latches. The extended length allows my tailgate to clear my power tounge jack.
by:
Field Dawg
08/11/2026
Heavy duty item and ready to bolt on my 50 degree A frame trailer which is 4” on an 18ft MaxBuilt. I am upgrading from another Demco coupler which was a 2”” and served me well. I expect the same or better with 2-5/16 to match the Equalizer weight distributing hitch. Tow heavy,Tow safe.
by:
Larry
09/05/2025
Jenny was incredibly helpful getting me the closet to but better couple for my aluminum trailer. The manufacturer drilled 3/4 inch hole and then installed 1/2 bolts. Warning to all if buying an aluminum trailer pay close attention to everything that’s bolted on.
by:
Spamhater007
03/30/2026
Works perfectly, no more forgetting to lock and punching a hole in my tailgate. These are very easy to install.
by:
Michael
01/15/2026
Great product but the pre drilled and threaded holes were not aligned with the jack hole. I had to drill one new hole for install.
The jack was taken off my old coupler so it’s not a problem with the jack.
The jack was taken off my old coupler so it’s not a problem with the jack.
by:
Terry
06/17/2025
Great price and quick shipping,what more could you want!!
Heavy duty and easy to install.Probably overkill for my 4000lb aluminum trailer.Better safe than sorry though.
Heavy duty and easy to install.Probably overkill for my 4000lb aluminum trailer.Better safe than sorry though.
by:
David
03/20/2026
hi quality fit perfectly
by:
Petr
08/11/2025
Great product, I wish it was more affordable, not a fan of a plastic pull tab handle, seems it will not last long.
by:
Scott
01/28/2021
We installed this on a customer's trailer. Everything is great and they're still using it. What we did not like about the product is the plastic lift handle. We prefer a more durable handle as this was installed on a trailer to be used around a farm.
by:
David
12/13/2024
We like the coupler. I was going to install it myself but ended up having some other work done on our horse trailer and had the trailer company install it while it was there. It's very easy to connect the trailer.
by:
Shawn
09/18/2025
I like the hitch it is exactly what I ordered. It came in exactly when I was told it would arrive thank you very much
by:
Jason
03/30/2022
the eZ-latch gets stuck all the time, never had a latch do that before. Would not buy another one
Jenny N.
4/7/2022
You mentioned that the EZ latch has been stuck and so I reached out to the manufacturer. There are a few questions that they wanted to ask. Is it stuck in the closed position? Have you coupled to the coupler when the handle was open? It is possible that the stem inside the coupler is bent which would cause this issue.
Jason
4/7/2022
Thank you for this. Answers are:Gets stuck in the closed position when its coupled to ball hitch 90 percent of the time I have coupled when handle was open It is possible the stem is bent… not sure how to tell
Jenny N.
4/7/2022
The stem is going to be hard to get to as it is under the handle. When coupling with this coupler you would want to make sure that the handle is always in the closed position when coupling. When it is in the open position it can bend the stem which would cause the handle to become potentially stuck. You could repair it by using the latch repair kit part # DM6008.
by:
John S.
12/22/2016
Very heavy duty piece 5/16 steel. I have not installed yet, dis like the fact that it come with a plastic handle as well as no instructions or recommendation as to what hardware they recommend. A little disappointing but when in doubt grd 10.9
by:
Jeff
02/05/2024
Great product, heavy duty, latch ensure the trailer is properly connected.
by:
Karen
11/15/2023
We are very pleased with the product we ordered and are grateful the timely, free shipment! We always appreciate the service we receive from etrailer.
by:
Fred
06/08/2025
received coupler in 3 days. quick excellent service.
by:
Chuck
03/21/2024
Really heavy duty. Well made.
by:
Earlwayne
08/07/2021
Well constructed product that easily fit to update an older trailer. Very good buy
by:
Brandon
08/21/2021
Well built. Simple coupling design.
by:
Pete kinsler
02/02/2017
Very nice coupler easy to operate glad I went with that one
by:
Todd
06/01/2023
Ordered the wrong one got a quick exchange and got the correct one very quickly.
Nice job.
Nice job.
by:
Cary
01/31/2023
Well constructed and works great!
by:
Gregory
12/21/2022
Great Product Thx Greg
by:
Avraham
01/14/2026
by:
Karl
03/10/2026
25
229
true
Show More Reviews
See what our Experts say about this Demco A-Frame Trailer Coupler
- Coupler Upgrade for Fulton 44311H A-Frame CouplerHi Mike; to upgrade your Fulton coupler I recommend the Demco # DM13205-95 (Zinc) or # DM16680-52 (Silver). The eZ-Latch mechanism is a really nice feature that allows you to hook up when the latch is closed. It will already be set for a 2-5/16" ball but you can adjust it if you think that is necessary. The only thing I don't know is if the bolt pattern matches up since we don't have that information for that Fulton coupler. I attached a picture below showing measurements on the Demco...
view full answer... - Replacement Coupler for 2008 Victory Enclosed TrailerAs far as I know your 2008 Victory trailer has an A-frame on it. Assuming that is correct, and it is a 50 degree A-frame, I recommend one of the following: -Demco 50-Degree A-Frame Trailer Coupler # DM16680-52 (Bolt-On, Silver Powder Coat) -Demco 50-Degree A-Frame Trailer Coupler # DM13205-95 (Bolt-On, Zinc Finish) -Demco 50-Degree A-Frame Trailer Coupler # 12660-97SP (Weld-On, Primed) If you have a 32 degree A-frame you can choose from the following: -Demco 32-Degree A-Frame Trailer...
view full answer... - What Diameter are the Chain Anchors on the Demco A-Frame Trailer Coupler DM13205-95? Hey Jon, welcome back! Those are indeed for safety chains. The chain anchor holes are 1/2" in diameter on the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item # DM13205-95. To attach a set of safety chains like the item # BPH94MR to them you will want to use 1/2" grade 5 bolts. If you're concerned about attaching safety chains directly to the coupler, you can weld two of the item # E950 or item # 3375471000 to your trailer's frame. What kind of trailer do you have? You can...
view full answer... - Replacement A-Frame Coupler for 2-5/16 inch Hitch Ball with Higher Weight RatingHey Daniel, I am really big fan of the latch system on the Demco eZ latch couplers like the part # DM13205-95. Unlike most of the current popular designs this stays easy to use over time and doesn't require a ton of finagling once its been out in the weather for any length of time. This is for a 2-5/16 inch ball and has a 21k capacity. What do you think?
view full answer... - Bolt Size to Install Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-LatchThe bolts required to install the Demco 50-Degree A Frame Trailer Coupler # DM13205-95 are 3/8" diameter x 1-3/4" long Grade 5 bolts. I spoke with the manufacturer and they confirmed that you won't want to use Grade 8 bolts on this install since they won't provide enough flex and may end up shearing through the coupler frame or breaking off completely.
view full answer... - Demco Coupler Dimensions For 50-Degree A-Frame Trailer For Fabricated FrameThanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95. As you can see it is 17-5/8" long in total, and 8-5/8" behind where the actual coupler portion is.
view full answer...
- Can You Replace Stock Coupler On A 2023 ATC Raven Car Hauler With Demco Coupler # DM13205-95Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for you. When installing the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95, you will want to use 3/8 inch grade 5 bolts, that are approximately 1-1/2 inches long. Ten bolts will be needed five bolts on each side. For extra security I also...
view full answer...
- Solution for Repair Kit for A-Frame Coupler Latch on 1969 AirstreamI do have a solution, but those repair kits are designed for an Atwood coupler and have been discontinued. Atwood couplers are no longer made so neither are the parts. The best solution is to replace the coupler with a new one. For a weld-on option you could use the # CA-5400-B or for a bolt-on the # DM13205-95. I have attached some review videos along with a link to all of our A-frame 2-5/16 couplers for your reference.
view full answer... - Can Steel Trailer Couplers Be Attached to an Aluminum Trailer? You can safely use a Straight Tongue Coupler # DM13689-95 or A-Frame Coupler # DM13205-95 with your aluminum trailer frame. The zinc coating on these are not going to have any reaction with the aluminum frame. Do be sure any channels use spacers in the frame to prevent it from collapsing when tightened.
view full answer... - Difference Between Demco Couplers # DM13205-95 and # DM16680-52The big difference between the two couplers you mentioned is that the Demco # DM13205-95 does not come with chain anchors and the part # DM16680-52 does.
view full answer... - Demco Bolt on A-Frame Coupler to Replace Welded On Coupler Yes, so long as you have a standard a-frame trailer you will be able to replace your current welded on coupler with the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K item # DM13205-95. I have attached a photo with detailed dimensions for a standard 50-degree A-Frame coupler so you can confirm compatibility with your trailer. To install the Demco A-Frame Trailer Coupler item # DM13205-95 that you referenced, you will want to use 3/8 inch, grade...
view full answer...
- Recommended High-Capacity Silver-Painted or Zinc Plated A-Frame Trailer CouplerIt sounds like you're looking for a replacement a-frame coupler like # CA-5280-RB but in a silver-painted or zinc-plated finish. Please click on the link provided to see all bolt-on standard a-frame couplers for 2-5/16-inch balls. For the highest-rated designs Demco part # DM16680-52 is a 21K-rated bolt-on coupler with a silver powder-coat finish and part # DM13205-95 has a zinc finish. Both fit jacks with a 2-1/4-inch diameter outer tube and have a standard 3-1/4-inch mounting hole spacing....
view full answer...
- Replacement 2-5/16" Zinc Trailer Coupler That Bolts On Instead Of Welding OnHey there Jeffrey! I would look at the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch # DM13205-95. This matches your specs of the 2-5/16" ball, zinc finish for marine applications or just better corrosion resistance, and it has the pre-drilled bolt holes for a bolt-on installation rather than weld-on. It also has the nice EZ-Latch which lets you drop the coupler on the ball without needing to lift up the latch, so it's completely hands-free until you go to disconnect,...
view full answer... - Installation of Demco A-Frame Trailer CouplerIn order to install the Demco A-Frame Trailer Coupler # DM13205-95 you'll need to remove the current one on your Primetime Avenger. This is a bolt-on coupler so the welding won't be necessary.
view full answer... - Demco Bolt on A-Frame Coupler to Replace Broken Welded On CouplerThe Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item # DM13205-95 that you referenced will fit a standard a-frame trailer. This is a bolt on coupler so you won't have to borrow a welder. To install you will want to use 3/8 inch, grade 5 bolts , approximately 1-1/2 inches long. You will want to use 5 of these bolts per side for a total of 10 bolts. I have attached a detailed diagram of this coupler so you can confirm it fits your trailer before you purchase.
view full answer... - Replacement Coupler For A Bulldog Heavy-Duty Cast BD44150WH301Hi Mark! Your best option is going to be something like the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K # DM13205-95. This fits the same 50 degree A-Frame, but has more capacity at 21,000 pounds (the Bulldog BD44150WH301 has 15,000 pounds of capacity). The eZ-Latch is also one of the easiest ones to use on the market, so I do highly recommend it. Now the reason I am steering you in a different way has to do with Bulldog's parent company,...
view full answer... - Availability of A-Frame Coupler Latch Repair KitIf you're referring to the Fulton # F44314R0303 you looked at then you can use the Repair Kit for Fulton A-Frame Coupler # F640801. If you have the Buyers Products # 3370091595, a replacement latch is not available which means you would need to replace the coupler. If you do need to replace the coupler, I recommend the Demco # DM13205-95 instead. This has the eZ-Latch which is similar to the Auto-Latch the Buyers Products coupler has. However, this coupler has a repair kit # DM6008 should...
view full answer... - Why Doesn't Demco Coupler Have Safety Chain LoopsThere aren't any safety chain loops on the Demco coupler part # DM13205-95 that you referenced because you want to attach the chains to the trailer frame and not to the coupler itself incase for some reason the coupler was to come off at the welds. For safety chain loops that you could weld to your trailer frame we have the part # E950.
view full answer... - Recommended 2-5/16 Coupler To Replace 2 Coupler On 2019 Winnebago Minnie 170K Travel TrailerI found a few pictures of the coupler on your 2019 Winnebago Minnie 170k Travel Trailer and you currently have an A-frame coupler. The most likely replacement option is the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole # DM13205-95 which is for trailer frames that have the standard 50 degree frame and requires a 2-5/16" hitch ball. The 50 degree A-Frame is the standard but it wouldn't hurt to confirm that the 50-Degree A-Frame is in fact what your trailer uses. The Demco # DM13205-95...
view full answer... - What Size Hardware Should be Used When Installing Demco 50-Degree A Frame Trailer CouplerThe bolts required to install the Demco 50-Degree A Frame Trailer Coupler # DM13205-95 are 3/8" diameter x 1-3/4" long Grade 5. Grade 8 is not recommended as they don't flex enough and could sheer off.
view full answer... - How to Convert Hydraulic Drum Brakes to Electric Over Hydraulic EOHIn order to convert the hydraulic drum brakes you have on your trailer to electric over hydraulic (EOH) you will need a electric over hydraulic actuator, breakaway kit, brake controller, trailer wiring harness, and trailer coupler. We do have all of these components for you but not in an all inclusive kit. For the electric over hydraulic actuator, breakaway kit, and trailer wiring I recommend the HydraStar Marine Electric Over Hydraulic Actuator part # HS381-9065. This kit contain the...
view full answer... - 2-5/16 inch Ball Coupler that Can be Disconnected When Under TensionThe Demco EZ latch couplers like the part # DM13205-95 have a mechanism that will release when under tension like you are wanting and will allow the trailer to be jacked up and off the ball as well. This would be a great option.
view full answer... - Replacement Coupler for a 2004 Airstream Classic TrailerThanks for the pictures Brandon! I like what you're thinking wanting to go with a Demco coupler as a replacement. I've got two options, I would recommend depending on whether or not you want a bolt-on or weld-on installation. Bolt-On - Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item # DM13205-95 Weld-On - Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item # 12660-97SP Both of these couplers will fit your Airstream's 50-degree a-frame and have the standard jack bolt...
view full answer... - Can Demco 50-Degree A-Frame Trailer Coupler be Used on Horse TrailerYou can absolutely use the Demco 50-Degree A-Frame Trailer Coupler with Jack Hole - eZ-Latch # DM13205-95 with a horse trailer. Couplers aren't specific to any kind of trailer, so as long as it has the specs you need, it will work for sure. This coupler will fii A-frame trailers, couples to a 2-5/16" hitch ball and has a 21,000 lb capacity. It can also use a pin lock, the Master Lock Adjustable Trailer Coupler Lock # 2847DAT. I have added links to video reviews for you to check out of...
view full answer...
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Amanda M
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Terry
8/17/2026
Still love them. Latching feature is great, but the extended coupler length is what benefits me the most. It allows for tighter turns and allows for clearance for my power tounge jacks on both trailers. Great investment!