We'll connect you with nearby partnered installers who know this exact setup.

Yakima

Yakima SkyLine Roof Rack for Fixed Mounting Points - RoundBar Crossbars - Steel - Black - Qty 2

Part Number: Y76FB

8064 Reviews

In Stock

$604.75

Not Confirmed to Fit

2017 BMW X4

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

yakima roof rack crossbar skyline for fixed mounting points - roundbar crossbars steel black qty 2

Show All (1) Product Images

Show Fewer Product Images

Customer Photos

Yakima SkyLine Roof Rack for Fixed Mounting Points - RoundBar Crossbars - Steel - Black - Qty 2 customer photo

Show All (17) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

These strong, galvanized steel crossbars supply the backbone for this Yakima roof rack. The rack works with accessories that clamp around the bars. Vinyl coating helps resist corrosion. Installs to fixed mounting points on your vehicle's roof. Great Prices for the best roof rack from Yakima. Yakima SkyLine Roof Rack for Fixed Mounting Points - RoundBar Crossbars - Steel - Black - Qty 2 part number Y76FB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (8064)
Q & A (0)
Related Parts
Photos

Yakima Roof Rack - Y76FB

Highlights

Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 RoundBars, 4 SkyLine towers, 4 RoundBar adapters, and a custom fit kit for your vehicle.
Strong Steel Construction: Galvanized steel bars provide a sturdy backbone for hauling gear.
Corrosion-Resistant Finish: Black vinyl coating protects the bars from rust and wear.
Accessory-Ready Design: Round crossbars work with carriers and accessories that clamp around the bars.
Secure Mounting Points: Installs to the fixed mounting points on your roof for a solid, stable setup.

Features to know about

Haul Heavy Loads with Confidence: Strong Galvanized Steel Bars

These crossbars are built from galvanized steel so they can handle serious weight without flexing. With a 165-lb capacity, they give you the backbone you need for hauling kayaks, camping gear, or extra luggage on long trips. The black vinyl coating not only looks clean but helps protect against corrosion for reliable use year after year.

Keep Your Gear Secure on Every Drive: RoundBars with Full Tower System

The complete setup includes 2 RoundBars, 4 SkyLine towers, 4 RoundBar adapters, and a custom fit kit. The round shape works perfectly with carriers and accessories that clamp around the bars, creating a tight grip that stays steady even on bumpy roads. It’s a straightforward system that’s ready for whatever gear you’re bringing along.

Protect Against Rust and Wear: Black Vinyl Coated Finish

When you’re out in the elements, the last thing you want to worry about is your rack rusting. The black vinyl coating acts as a barrier against moisture and road grime, keeping the steel underneath protected. That means less maintenance, longer life, and years of dependable support no matter the season.

Add Theft Deterrence When You Need It: SKS Lock Core Compatibility

You can pair this rack with Yakima Same Key System (SKS) lock cores (sold separately) to help deter theft. Once installed, the locks secure the rack to your roof so you can park with confidence at trailheads or overnight stops without having to unload your setup each time.

Specs

Dimensions

Crossbar dimensions: 48" long x 1-1/8" diameter

Weight and Capacity

Weight capacity: 165 lbs

Color

Color: black

Construction

Construction: steel

Warranty

Limited lifetime warranty

8000408 Yakima Round Crossbars - Steel - Black - 48" Long - Qty 2

8000163 Yakima SkyLine Roof Rack Towers for CoreBar, JetStream, and RoundBar Crossbars - Qty 4

8000221 Yakima Landing Pad 1

8003536 RoundBar StreamLine Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4

Installation Details Y76FB Installation instructions

Alternate Instructions Y76FB Installation instructions

4.8

25586 reviews

5 Stars		(21992)
4 Stars		(2488)
3 Stars		(778)
2 Stars		(9)
1 Star		(319)

by: Rick 02/13/2026

etrailer rocks! Great customer service and support. All pieces worked as promised and for my vehicle.

A bit disappointed that Yakima towers do not have a height adjustment so I can make both round crossbars level to keep my canoes from catching too much air on the highway. My vehicles roof flush rails are are curved vertically and change widths front to back. Had to Mickey Mouse the back crossbar to make it higher with PVC brick moulding.

Also the tower covers with the Yakima label don't clip on strongly enough so I had to add duct tape because I did not trust them to stay on.

Click to Enlarge

by: Fred 10/17/2026

Like that I can use the bar from my Yakima rack and with base mod can fit it to the rail on my new car. Appreciated Eli's help in putting my order together to be able to make this conversion.

by: La 07/01/2026

Products great. Service and delivery from you company was not acceptable. when I placed my order you missed your delivery date by five days. Not sure how this happened, but requested help was not available.

by: Geriatric sailer 10/03/2026

High quality. Adapter to use modern towers with my 2003 round tube cross members.

by: Sally 06/29/2024

These convertors will allow me to continue to use my hullavator system currently on round bars. The drop in feature of skyline towers makes the whole change out a snap. Certainly better than buying a whole new hullavator.

Sally One Year Later

6/30/2025

Perfect. It makes changing out to load my kayak super simple.

by: Paul 08/24/2026

Solid and easy to instal

by: John Q 09/07/2026

excellent and very fast service

by: Frank P. 03/06/2016

Fit good with the OE track on roof. I like the new covers they supplied with the mounts.

Click to Enlarge

by: Nick D 05/16/2017 One Year Later

Have been rocking my Yakima rack from etrailer.com for a year now. I am using rack in conjunction with a Tepui tent. Once I added the air deflector, I would say it's the perfect setup. The Yakima gives more clearance over the factory rack, so I was able to get my hands under it to secure the tent hardware. If you're thinking of upgrading your factory rack, I would not hesitate to use etrailer.com

Click to Enlarge

by: Linda 08/31/2025

Customer service was extremely helpful in finding the exact replacement parts needed for my old car!

by: John P. 08/29/2018

2017 Volkswagen Golf

Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on.

etrailer.com shipped these out quickly and all parts arrived without damage.

Click to Enlarge

by: Charles 02/09/2024

Toyota 4Runner

Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs!
As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!

Click to Enlarge

by: Rob 04/19/2023

Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.

Click to Enlarge

by: griz 09/03/2025 One Year Later

As all yakima products not the cheapest but work

by: Thomas 09/16/2020

I bought both the roof rack and the cage from etrailer! Put everything on myself...easy peasy!

Click to Enlarge

by: Elliot 04/02/2025

2025 Kia Sportage

Straightforward installation to adapt the new SkyLine towers to the standard Yakima round bars.

by: Gary 08/01/2025

Excellent service and fast shipping.

by: See 11/03/2022 One Year Later

with so many variables having someone that could sort through all them was very helpful Thanks etrailer

Click to Enlarge

by: Nick 09/21/2017 One Year Later

Product works as advertised thus far. When you buy the yakima towers, you are required to purchase these as well to fit the rounder bars (I feel sure there are other adapters for other bar shapes). These should have come with the towers in my opinion, and I resented having to shell out more $$ to purchase these "must have" adapters to mount my bars. 3 star overall rating based on function, price. Delivery and packaging was top-notch through etrailer.

by: Fabe Red 03/12/2017 One Year Later

Loved the Yakima roof rack system. It's been a year and it is still going strong. Such an easy install and it looks great on my truck. My Yakima Skybox 16 sits perfectly atop the roof rack. My drives to The Sunshine State are all the more pleasurable and comfortable. My cargo area now has plenty of extra space since I load up my skybox 16 which sits perfectly on my Yakima roof rack system. The service from Etrailer was awesome. Thank you guys for your customer service and for selling such great products. I would recommend Etrailer to anyone.

by: Pat G 08/29/2013

Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.

Will definitely be doing business with you all again.

Click to Enlarge

by: John 11/16/2023

Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.

Click to Enlarge

by: Mark 07/19/2020

The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always.

by: Paul 07/09/2019

2019 Toyota Sienna

Installation of the hitch, wiring,rear bike rack, and new roof rack towers went well. I didn't set any speed records, but I was more concerned with doing no damage on a new 2019 Toyota Sienna AWD van. The hitch fit up well per instructions except that I was able to work around the exhaust without lowering it. Underbody panel and rear fascia did both need to be removed. Very happy with the end result. The new van is now set up to haul the bikes and canoes and move my log splitter.

by: Martin 11/12/2022 One Year Later

etrailer is excellent...however, not too pleased with Yakima and these cross bars - second set in four years...they make them out of a steel that rusts quickly...better out of stainless or aluminum. Maybe that is their idea of planned obsolescence. I also learned not to install end caps...that accelerated the corrosive process.

25586

true

Show More Reviews

See what our Experts say about this Yakima Roof Rack

Do you have a question about this Roof Rack?

Can Thule Hullavator Install on Yakima Crossbars
The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer...
Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
view full answer...
Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
view full answer...
Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
view full answer...
Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
view full answer...
Roof Rack Options that Fit 2012 Chrysler 300
What install video are you referring to? Or what part number?
view full answer...
Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
view full answer...
Yakima RoundBar Roof Rack Components Needed For A 2022 Kia Telluride
Hey John, To mount Yakima RoundBars to your Telluride's flush rails you'll need the following components: SightClip Fit Kit # Y34UR SightLine Towers # Y64AR RoundBar SL Adapter # Y03536 Yakima recommends their 48" RoundBar # Y00408 or 50" aero bar for the 2022 Kia Telluride so you'd have quite a bit of overhang if you go with 58" RoundBars # Y00409. Flush rail towers are typically being screwed into fixed mounting points or clamping down into a slot so they actually are a bit more...
view full answer...
Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
view full answer...
What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
view full answer...
Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
view full answer...
Recommended Roof Rack for a 2024 Chevy Equinox w/ Factory Raised Side Rails
Yes, there absolutely is! I have listed the parts below you will need to add a Yakima roof rack, with round bars, to your 2024 Chevy Equinox with factory raised side rails. Not sure what length of round bars you have so I threw in the ones we have for reference. TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 Yakima RoundBar Crossbars - Steel...
view full answer...
Will the Yakima 1A Raingutter Towers Work with the Kwik-Rail Mounting Brackets # Y08002?
From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204. If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - Round...
view full answer...
Can I Mount the Side Loader Mounting Brackets item # Y08002 on a Vertical Surface?
Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair. Here are the rest of the parts you'll need to complete the roof rack: 1A Raingutter...
view full answer...
What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?
For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
view full answer...
Removing Yakima BaseLine Roof Rack System From 2016 Honda Civic
While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench. First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have...
view full answer...
Round Bar Roof Rack For a 2024 Toyota 4Runner With Raised Factory Rails
Andrew, we currently only carry round bar crossbars from Yakima. For your 2024 Toyota 4Runner you will need the Towers # Y33TR , RoundBar Adapters # Y03536 and then to select the length of the crossbars you want from the list below. I do see your 4Runner is 75.8" wide not including the side mirrors. 48" RoundBars # Y00408 58" RoundBars # Y00409 66" RoundBars # Y00410 78" RoundBars # Y00411
view full answer...
Correct Mounting Components Needed to Mount Yakima RoundBar on a 2024 Toyota RAV4
William, if you have the round Yakima Roundbars # Y00408, then you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536, the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR.
view full answer...
Yakima Roof Rack that Fits Leer Truck Topper Tracks
We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
view full answer...
Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
view full answer...
Roof Rack Solution for Truck Topper Using Artificial Rain Gutters
The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
view full answer...
Alternate Mounting Hardware for Yakima SpaceBooster Cargo Box on 2015 Subaru Outback Wagon
It is not a huge deal to add a few new mounting holes to the bottom of an ABS plastic cargo box like the Yakima SpaceBooster. A cordless drill and appropriately-sized drill bit will make short work of it. I would avoid using a heated implement for making the holes since it could be a bit messy and could make it harder to control the size of the hole. The things to keep in mind are that you want to drill no more additional holes than absolutely necessary so measure, check and re-check....
view full answer...
Thule Adapter To Retrofit Old Thule Ski Rack To Yakima Roundbar
Depending on what Thule Ski Rack you have currently, the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 may work for you if you have the Thule Flat Top #TH724 (DISCONTINUED), or the Thule Flat Top #TH725 (DISCONTINUED). You're going to want to verify that you do have either of those ski racks first. This mounting kit will your Thule ski rack to the Yakima Roundbars # Y00408. You're also going to need the Replacement Round Nut for Thule Carriers # 853-5439.
view full answer...
Yakima Roof Rack that Fits Roof Tracks on Leer Truck Canopy
I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
view full answer...
Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
view full answer...
Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer...
Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
view full answer...
Can Thule Hullavator Install on Yakima Crossbars
The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer...
Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
view full answer...
Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
view full answer...
Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
view full answer...
How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
view full answer...
Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
view full answer...
Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
view full answer...
Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer...
Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
view full answer...
Roof Rack System for 2026 Chrysler Pacifica
Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
view full answer...
What do I need to setup a Thule Hullavator on Yakima JetStream Crossbars on a 26 Toyota Highlander?
Great choice Peter, that combo works very well together! Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type. If the Highlander has "Flush Rails" this is the correct fit kit # Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4 # Y66VR Yakima Landing Pad 28 If the Highlander has "No Rails" this is the...
view full answer...
Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
view full answer...
What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
view full answer...
2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer...
Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
view full answer...
Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
view full answer...
Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
view full answer...
Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
view full answer...
Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer...
Can I Use the Same Yakima Landing Pad on my 2025 Subaru Outback That I Used on My 2019
That's a great question, Maryann! No, you can't use your existing Yakima Landing Pad 15 # Y00241 on your 2025 Subaru Outback Wagon. Instead, you would need to get the Yakima Landing Pad 27 # Y46VR. You will still be able to use your SkyLine Towers # Y53TR and just swap them out for the Landing Pad 27. Congrats on the new Subaru! What are you usually carrying on the roof?
view full answer...
Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
view full answer...
Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
view full answer...
Can Thule Hullavator Install on Yakima Crossbars
The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer...
Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
view full answer...
Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid
There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
view full answer...
How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
view full answer...
Will the Thule Force XT L Fit My 2020 BMW X5?
Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
view full answer...
Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
view full answer...
Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
view full answer...
Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
view full answer...
Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
view full answer...
Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
view full answer...
Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
view full answer...
Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
view full answer...
Roof Rack Options that Fit 2012 Chrysler 300
What install video are you referring to? Or what part number?
view full answer...
Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
view full answer...
Yakima Round Bar Roof Rack that Fits 2010 Toyota Highlander
That's an older Yakima roof rack than we have replacement towers for. It looks like your buddy ruined the lock assemblies and there wouldn't be a way to replace the lock setup. What vehicle do you have? I can look into what the correct Yakima round bar rack is and see if there's a way to reuse at least the bars.
view full answer...
Can The Towers And Fit Kit For The Yakima SkyLine Roof Rack Y93FB Be Purchased Separately?
Hi Joel! You can indeed purchase the towers and fit kit without the bars from the Yakima SkyLine Roof Rack for Fixed Mounting Points - RoundBar Crossbars - Steel - Black - Qty 2 # Y93FB for your 2020 Subaru WRX. I have those two parts listed below: SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 # Y00248 RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
view full answer...
Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
view full answer...
Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
view full answer...
Yakima RoundBar Roof Rack Components Needed For A 2022 Kia Telluride
Hey John, To mount Yakima RoundBars to your Telluride's flush rails you'll need the following components: SightClip Fit Kit # Y34UR SightLine Towers # Y64AR RoundBar SL Adapter # Y03536 Yakima recommends their 48" RoundBar # Y00408 or 50" aero bar for the 2022 Kia Telluride so you'd have quite a bit of overhang if you go with 58" RoundBars # Y00409. Flush rail towers are typically being screwed into fixed mounting points or clamping down into a slot so they actually are a bit more...
view full answer...
Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
view full answer...
What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
view full answer...
Parts Needed to Install Round Yakima Crossbar Roof Rack on 2020 Toyota Highlander
Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars. If you have a different setup currently let me know and...
view full answer...
Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford Focus
We carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
view full answer...
What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
view full answer...
Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
view full answer...
Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
view full answer...
What is the Difference Between Yakima Landing Pads 1 and 4
The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer...
Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
view full answer...
Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
view full answer...
Roof Rack System for 2026 Chrysler Pacifica
Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
view full answer...
Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
view full answer...
What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
view full answer...
Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
view full answer...
Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
view full answer...
Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
view full answer...
Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
view full answer...
Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
view full answer...
Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
view full answer...
How to Add Roof Rack to 2007 Saturn VUE Without Raised Rails
Hi Stephen; there are no specific kits that will allow you to install tracks and crossbars on your 2007 Saturn VUE. However, that does not mean it can't be done. What you can do is use rails like the Yakima 42" Tracks for Roof Racks # Y01126 which will require drilling. Make sure to measure your roof to ensure you have enough space for the tracks. With the tracks installed you can add crossbars using the SkyLine Towers # Y53TR and Landing Pad 1 # Y00221. Based on the racks designed to...
view full answer...
What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer...
Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
view full answer...
Can I Use Yakima SkyLine Towers with Thule Tracks?
Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
view full answer...
Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
view full answer...
Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
view full answer...
How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
view full answer...
Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
view full answer...
Parts Needed To Install Yakima Platform On 5' Leer Topper
Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
view full answer...
What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
view full answer...
Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
view full answer...
Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
view full answer...
What is the Difference Between Yakima Landing Pads 1 and 4
The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer...
Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
view full answer...
Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
view full answer...
Roof Rack System for 2026 Chrysler Pacifica
Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
view full answer...
Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
view full answer...
What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
view full answer...
Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
view full answer...
Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
view full answer...
Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
view full answer...
Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
view full answer...
Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
view full answer...
Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
view full answer...
How to Add Roof Rack to 2007 Saturn VUE Without Raised Rails
Hi Stephen; there are no specific kits that will allow you to install tracks and crossbars on your 2007 Saturn VUE. However, that does not mean it can't be done. What you can do is use rails like the Yakima 42" Tracks for Roof Racks # Y01126 which will require drilling. Make sure to measure your roof to ensure you have enough space for the tracks. With the tracks installed you can add crossbars using the SkyLine Towers # Y53TR and Landing Pad 1 # Y00221. Based on the racks designed to...
view full answer...
What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer...
Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
view full answer...
Can I Use Yakima SkyLine Towers with Thule Tracks?
Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
view full answer...
Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
view full answer...
Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
view full answer...
How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
view full answer...
Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
view full answer...
Parts Needed To Install Yakima Platform On 5' Leer Topper
Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
view full answer...

< Previous

12 3. . .11

Next >

Do you have a question about this Roof Rack?

Info for this part was:

Updated by:

Wilson B

Updated by:

Michael B

Edited by:

Daron K

Written by:

Alex H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.