To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re loaded up for a long drive, the last thing you want is a loud, whistling roof rack. The JetStream crossbars on this Yakima setup use an aerodynamic profile and push-down rubber strips in the top channels to help reduce wind noise and vibration. The strips stay in place around your gear mounts to block airflow, so highway trips stay quieter and more comfortable.
Some racks need rubber strips cut to fit your accessories, but not this one. The Yakima JetStream bars use push-down strips that let you press hardware directly into the channels—no trimming required. Once your mount is in, the strip closes back up to seal against wind and weather. It’s an easy, clean setup that keeps your rack looking tidy and ready for whatever gear comes next.
Whether it’s kayaks, bikes, or a cargo box full of camping gear, these crossbars are built to handle the load. The aluminum construction keeps weight down while offering solid strength with a 165 lbs capacity. It’s a dependable system you can trust for road trips or everyday hauling.
When you park for the night or stop at a trailhead, you can secure your rack with Yakima Same Key System (SKS) lock cores, sold separately. They deter theft of the rack so you can leave your vehicle with a little extra confidence knowing your gear system stays put.
This complete system includes 2 JetStream crossbars, 4 BaseLine towers, and a custom fit kit that installs directly on a vehicle’s naked roof. The overhang bar style gives extra space for mounting accessories while maintaining a streamlined look that blends well with your ride.
Alternate Instructions
Ratings & Reviews
I ordered these specifically for my vehicle and they fit perfectly. Clear instructions for installation and a coating that won't leave marks on my vehicle.
Happy with the purchase. Crossbars shipped and received quickly.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
straightforward installation with clear instructions and great youtube support, very secure, perfect fit to my vehicle
Easy to install and met my need for hauling a kayak.
The crossbars are light and very strong. They fit perfectly and installed easily.
Dealing with etrailer has been very easy. The first roof rack was incorrect and they worked with us immediately to get it resolved. In hindsight I am glad as the Yakima is a much better quality and works great with our car.
Thanks!
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Great product, easy to install, very happy with etrailers shipping.
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
They fit perfectly! Thank you!
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
All aspects of the purchase and installation were great. Based on the information provided on the etrailer.com website, I had a high level of confidence that I was purchasing the correct product(s) for my vehicle. The installation was relatively simple and straightforward and the rack is rock solid on my roof. It appears that I did a great job of following the directions :)
Yakima towers and crossbars were solid and easy to install with the very well written instructions. We used them on 2 cross country trips with any loosening. They were easy to remove. We plan to use them again as the need arises.
These bars worked great for the roof rack on our truck. Thank you!
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
Great UX for finding the options matching my car, and the baseline towers work great. Simple straightforward site, will plan to use them again when needed.
For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7.
Great product haven’t had any issues with it. Would highly recommend that anyone that’s looking for a roof rack system and a great seller at etrailer
Strong, Solid Bars, Super Light, and really easy to install!
These are great, and it is so nice to get a custom base clips that match the angles and contour of the sides of your roof. Makes it look very clean. These are made very well and for sure these will last a long time like my other Yakima products.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
High quality and all. But my old Yakima rack setup stayed together. The cover was part of a lever to tighten clips. The clips were captured in the assembly. New design the cover and clips need to be completely removed. Need a torque Allen wrench to install every time. Loose parts become Easter egg hunts. Am sure this is to sailer proof mount--that truly is impossible!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.