Custom Fit Roof Rack Kit With Y00408 | Y03536 | Y06145 | Y28TR

See what our Experts say about this Yakima Roof Rack

• Lowest Cost Roof Rack Recommendation for 2020 Hyundai Santa Fe With Bare Roof
  The lowest priced roof rack option we offer for the 2020 Hyundai Santa Fe with a bare roof would be a round bar rack from Yakima. The rack would consist of the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima SL Round Bar Adapters, part # Y03536 • Base Clip Fit Kit # Y06151 • Base Clip Fit Kit # Y06154 Unfortunately, the Malone # MPG215 rack you'd looked at isn't' a fit for your Santa Fe. I've linked you to an...
  view full answer...
• What Replacement Yakima Q Tower Components do You Carry for My 2013 Toyota Camry?
  I have a solution for you. Unfortunately, the systems that involve the Yakima Q Towers like # Y8880047 were discontinued by Yakima on your bare roof 2013 Toyota Camry. However, if you are looking for the discontinued part numbers that went with the towers for your vehicle, those were the Q Clips - Q5 8000605 and the Q Clips - Q116 8000716. This system fit Yakima RoundBars like the # Y00408. We unfortunately do not have a current Yakima crossbar setup for your vehicle that uses Yakima RoundBars....
  view full answer...
• 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier Recommendation
  For a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
  view full answer...
  
• Can Yakima Q Tower Roof Rack Work With 2021 Toyota RAV4 With Roof Rails
  Although we have a Yakima roof rack solution that will work on your 2021 Toyota RAV4, the Q-towers are pretty much obsolete at this point, and they were not compatible with raised roof rack rails and were meant for use on bare roofs. The good news you can re-use your crossbars if they're at least 48 inches long. You can assemble a compatible round bar roof rack using the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima TimberLine Towers, part # Y33TR • Yakima...
  view full answer...
• Recommendation for Carrying 4 Bikes on a 2009 BMW 535i
  There may be a way for you to carry 4 bikes on your 2009 BMW 535i, however, there are only class I trailer hitches available for your vehicle. Class I trailer hitches are limited to carrying a maximum of 2 bikes on a bike rack because of the reduced tongue weight of the vehicle and hitch. The reason that only two bikes are recommended, on a hitch mounted bike rack, for Class I hitches is that the added torque applied to the hitch and vehicle frame will be too great for the setup, and...
  view full answer...
• Yakima Roundbar Roof Rack System Options For A 2024 Kia Seltos LX
  Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet. If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima Crossbars...
  view full answer...
• Roof Rack Recommendation for a 2010 Subaru Outback Wagon with Raised Side Rails
  For your 2010 Subaru Outback with raised side rails you would need the Yakima roof rack components part numbers # Y00408, # Y03536 and # Y00147 to give you a set of crossbars so that you can install your Yakima cargo box.
  view full answer...
• Will the Yakima Q Towers Roof Rack Fit a 2002 Rodeo Sport 2 Door With 2 Sunroofs
  According to both our fit guide and the Yakima Fit Guide this roof rack system is considered a fit for your 2002 Isuzu Rodeo Sport 2 door with 2 sunroofs. I am not sure what cargo you intend to carry with this roof rack system but I have included some fit notes that Yakima provided below. These are specific to using this roof rack on your 2002 Isuzu Rodeo Sport 2 door that has 2 sunroofs. I have also provided a photo showing the Yakmia roof rack on a 2002 Isuzu Rodeo Sport 2 door for...
  view full answer...
  
• Base Rack Needed to Carry Yakima SkyBox NX 16 on 2008 Nissan Rogue with Naked Roof
  When looking to carry the Yakima Skybox NX 16, # Y95AV, I recommend the Yakima Roof Rack System. For a complete system you will need the following parts: Round 48 Inch CrossBars, # Y00408. BaseLine towers, # Y28TR. RoundBar adapters, # Y03536. BaseClips, # Y06123 and # Y06135. Just a reminder, you will want to check your owner's manual to confirm how much weight the roof of your Nissan Rogue can safely handle. You will need to account for the weight of the roof rack, the cargo box and...
  view full answer...
• Will the Yakima MegaWarrior Cargo Basket # Y07080 Fit a 2009 GMC Acadia and is Extra Hardware Needed
  Since your 2009 GMC Acadia has the factory raised side rails with no crossbars you will need to use the Yakima RailGrab Towers, part # Y80145, and the Yakima 48 Inch Round CrossBars, part # Y00408, to be able to install the Yakima , to your vehicle. The Yakima towers will clip to your factory side rails and the crossbars will attach to the towers. This will give you the crossbars that run from side to side and are needed to install the MegaWarrior cargo basket. The weight capacity of...
  view full answer...
• Roof Rack Recommendation for a 1995 Pontiac Grand Prix 2 DR Coupe
  I recommend going with a Yakima Roof Track System for your 1995 Pontiac Grand Prix 2 Dr Coupe. This track mounts directly to the roof of your Grand Prix with PlusNut hardware. Installation does require drilling through the roof of your vehicle so if you are uncomfortable doing this yourself, I strongly encourage you to take your vehicle to a local body shop to have the track system installed. Each component for the Yakima Roof Track System is sold separately so in order to have the complete...
  view full answer...
• Yakima Roof Rack System to Fit 2017 Mazda CX-3
  I have a solution for you to install Yakima round crossbars on your 2013 Mazda CX-3 however, there are no Q Clips or Q Towers designed to fit. Instead you will want to use the BaseLine Towers # Y28TR with the RoundBar Adapters # Y03536. Then for the fit kit you'll use the BaseClips # Y06130 and # Y06132. Two of each BaseClip is needed. Yakima recommends 48 inch Round Crossbars # Y00408 for the CX-3.
  view full answer...
• Roof Rack Recommendation for 2016 Kia Sorento with Factory Flush Rails
  An aftermarket sunroof is uncharted territory as far as roof capacity is concerned since our roof rack manufacturers and the vehicle manufacturer never would have tested that configuration. What I would recommend you do is check with the manufacturer of the sunroof and see what they recommend for if a rack can be installed. If they say you'd be fine the Rhino Rack part numbers # RRVA126B-2 and # RRSX023 is a confirmed fit for the factory raised rails of your 2016 Kia Sorento and would...
  view full answer...
• Largest Roof Rack Recommendation for a 2016 Subaru Outback
  If you install the Yakima SkyLine Towers, # Y53TR, along with the Round Bar Adapter, # Y03536, and the Landing Pad, # Y00241, then you can install any length of the Yakima round crossbars that you wish. Yakima has a 78 inch crossbars, # Y00411, 66 inch crossbars, # Y00410, 58 inch crossbars, # Y00409, and 48 inch crossbars, # Y00408. It is okay to cut them down to a custom length as well if you feel like one is too long once it is installed. There are a few things to keep in mind. First,...
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford Ranger
  To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
  view full answer...
• Roof Rack System for the Mini Cooper S 2008 Or Hitch and Bike Rack
  We have two roof rack systems, Yakima and Thule, that will be very secure on your vehicle and do not require drilling to install. As long as you install these products properly they will not leave scratches or damage the vehicle in any way. The Thule system will require the following items. Thule Roof Rack Fit Kit # THKIT1366 Thule Rapid Traverse Foot Pack # TH480 Thule SquareBars # TH712200 The Yakima System will require the following. Yakima Q Towers Roof Rack Feet for Naked Roof...
  view full answer...
• Yakima Roof Rack Fitment on a 2013 Jeep Grand Cherokee Overland
  I can help you find the right Yakima roof rack for your 2013 Jeep Grand Cherokee Overland. If your Overland has the E group package you will see a metal strip in the flush mounted rails, the Yakima kit you will need is the # Y00408 in combination with # Y53TR, # Y03536, and # Y00244. This kit will include the round crossbars, the RailGrab Towers, and the Raised Side Rail adapters. If your Overland doesn't have the E group it will have a black plastic rail and the Yakima kit you will need...
  view full answer...
• Can 48 inch Yakima Crossbars Fit on 2008 Mazda 3 5 Door
  Since the Q Tower system is no longer the current roof rack Yakima roof rack and has been phased out we don't have the parts needed to install a Q Tower setup with 48 inch long bars but I was able to check with Yakima and the 48 inch bars are correct for your vehicle. The current roof rack components needed are the BaseLine Roof Rack part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
  view full answer...
• Carrying 4 Bikes on a 2017 Toyota Prius Prime
  I may have a solution for you. However, you aren't able to use the Yakima DoubleDown Ace on your 2017 Toyota Prius Prime to carry four bikes. The hitch receivers for your vehicle, like the Draw-Tite # 24966, are Class I receivers and the DoubleDown Ace fits Class II and Class III receivers. In addition to that a Class I hitch is only able to carry up to 2 bikes. Instead to carry 4 bikes on your car I recommend using a hitch mount bike rack like the Swagman Titan, part # S63400, to carry...
  view full answer...
• Recommended Roof Rack for 2004 Honda Civic Coupe
  We have several roof racks confirmed to fit your 2004 Honda Civic coupe, but there are no Rhino Rack roof racks among them. I have included a link to all the roof racks confirmed to fit your vehicle. You can then filter them by bar type, brand, color, etc. I recommend going with the Yakima Round Crossbars Roof Rack which includes the following parts: 48 inch CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 Fit Kits # Y06162 and # Y06159 Check out the demonstration...
  view full answer...
• Can I Use Thule Rain Gutter Feet with Yakima Wide Body Artificial Rain Gutters
  I have a solution for you, but the Thule foot packs that attach to rain gutters like the # TH65BJ are only designed to fit on the Thule Artificial Rain Gutters # TH542. The Thule Rain gutter feet do work with most Thule crossbars, so you wouldn't need to get new bars in most cases, just the gutters and foot pack. With that say, if you wanted to use what's already there you can instead swap to Yakima Rain Gutter Towers # Y00101 and the Yakima Round Bars 48" # Y00408. Most roof boxes are...
  view full answer...
• Will 4-Bike Thule Apex Bike Rack Fit a Class I Trailer Hitch on a 2017 Toyota Prius Prime
  The Thule Apex # TH9025XT fits a Class I hitch but even though it can hold 4 bikes you are still limited to 2 bikes. This is a limitation of Class I trailer hitches. In order to carry 4 bikes you would need a combination of a trailer hitch mount rack and a roof rack set up. For a hitch mounted bike rack to offset some cost for a roof rack I recommend the 2 bike Apex # TH9024XT. It weighs just 33 pounds so it is easy to handle and won't put a lot of stress on the trailer hitch. For a roof...
  view full answer...
• What is the Capacity of Yakima 48 Inch Roof Rack Crossbars
  The 48 inch Yakima crossbars, # Y00408, have a weight capacity of 165 pounds no matter which mounting system you are using. Different applications have different ratings though. It sounds like you are not using the system on a vehicle roof. Whatever you are using it for, if you can determine the capacity of the mounting surface that will be beneficial as you do not want to exceed it. Always go by the lowest rating.
  view full answer...
• Roof Rack Recommendation for a 2016 Kia Sorento with Flush Rails
  For your 2016 Kia Sorento with factory flush rails you would want the Yakima roof rack that consists of part numbers # Y00408, # Y00145, # Y03536 and # Y06013.
  view full answer...
• Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-Towers
  The aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
  view full answer...
• Lowest Cost Roof Rack Recommendation for 2020 Hyundai Santa Fe With Bare Roof
  The lowest priced roof rack option we offer for the 2020 Hyundai Santa Fe with a bare roof would be a round bar rack from Yakima. The rack would consist of the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima SL Round Bar Adapters, part # Y03536 • Base Clip Fit Kit # Y06151 • Base Clip Fit Kit # Y06154 Unfortunately, the Malone # MPG215 rack you'd looked at isn't' a fit for your Santa Fe. I've linked you to an...
  view full answer...
• Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
  Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
  view full answer...
• Roof Rack to Fit a 2014 Toyota Prius to Carry Bikes and Skis
  Since you're looking at a number of components (a roof rack, 4 bike carriers, and a ski carrier) I recommend sticking with one manufacturer for all the pieces so you can have the locks all keyed the same if you choose. For the roof rack I like the Yakima round bar system using the 58 inch crossbars # Y00409, BaseLine Towers # Y28TR, adapter # Y03536, and BaseClip # Y06117. For the bikes a great carrier is the Yakima FrontLoader, part # Y02103. It'll fit on the round bars nicely and a...
  view full answer...
• Bike Rack Recommendations for a 2005 Honda Pilot Without a Trailer Hitch
  There are three different ways to carry bikes on a vehicle and those are with a trailer hitch mounted bike rack, a rooftop mounted bike rack or a trunk mounted bike rack. Only hitch mounted and rooftop mounted bike racks are recommended for your 2005 Honda Pilot since bike rack manufacturers have determined it is not safe to attach a trunk mounted bike rack on your rear hatch. If you have a roof rack on your vehicle, then you could look into rooftop mounted bike racks like the Swagman...
  view full answer...
• Best Options to Carry a Kayak and 2 Bikes with a 2018 Kia Optima
  The best way to transport a kayak and 2 bikes with your 2018 Kia Optima is to use a hitch mount bike rack and then add a roof rack for carrying your kayak. You could potentially carry everything on your roof but the 165 lb max weight limit of a roof rack can easily be exceeded depending on what bikes and kayak you have. The trailer hitch I recommend using is the Class I Draw-Tite Sportframe # 24965 because it doesn't require the use of a support strap for non-trailer loads like the Curt...
  view full answer...
• Roof Rack Recommendation For A 2006 Honda Civic LX Coupe
  Those two parts are exactly the same. On the Thule website the part number for the Thule Rapid Traverse Foot is 480R. Etrailer and Action Car add their own prefixes to the part number and the two companies just use a different prefix for the same part. With Thule's old roof rack setup, you would not have a problem getting a fit for your vehicle. Your 2006 Honda Civic Coupe only has two doors and most aftermarket roof racks that clamp to your vehicle's frame are designed to clamp under the...
  view full answer...
  
• Does the Rhino-Rack 2500 Roof Rack # DS118B Fit My 2013 GMC Terrain?
  From your recent searches, it looks like you are asking for the compatibility of the Rhino-Rack 2500 Roof Rack - Square Crossbars - Naked Roofs or Fixed Mounting Points - 46" Long on your GMC Terrain. Unfortunately, this roof rack does not fit your vehicle. With that being said, we do have some great compatible roof rack systems that do fit. The fitment that you need depends on if your vehicle has a bare roof or raised factory rails. If you have bare roof on your 2013 GMC Terrain, I...
  view full answer...
• What Replacement Yakima Q Tower Components do You Carry for My 2013 Toyota Camry?
  I have a solution for you. Unfortunately, the systems that involve the Yakima Q Towers like # Y8880047 were discontinued by Yakima on your bare roof 2013 Toyota Camry. However, if you are looking for the discontinued part numbers that went with the towers for your vehicle, those were the Q Clips - Q5 8000605 and the Q Clips - Q116 8000716. This system fit Yakima RoundBars like the # Y00408. We unfortunately do not have a current Yakima crossbar setup for your vehicle that uses Yakima RoundBars....
  view full answer...
• Roof Rack Recommendation for 2019 Ram 1500 with Panoramic Roof
  For a roof setup like what you have on your 2019 Ram 1500 I would much rather recommend you a roof rack that installs by grabbing the door frames like the Yakima Corebar rack part numbers # Y00423, # Y28TR, # Y06135 as we know this will work great on your truck and wouldn't possibly interfere with the panoramic roof or side air bags. Plus there's no permanent modification to the truck either.
  view full answer...
• Yakima LoadWarrior Roof Rack Cargo Basket for a 2022 Honda Accord Hybrid Sport
  Yes, the Yakima LoadWarrior Roof Rack Cargo Basket - Steel item # Y07070 would work great on your 2022 Honda Accord. It only weighs 25 lbs and will attach to the Yakima HD Crossbars item # Y01156. You will want to verify your Accord's capacity in your owners manual but the load warrior has a weight capacity of 140 lbs. It also has a wind fairing to reduce noise and is usable with all types of accessories. To secure your cargo basket to your roof rack you will want to use the Locking Brackets...
  view full answer...
• Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
  I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
  view full answer...
  
• Can I Reuse Yakima Q Towers for 2021 Ford F-250
  In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
  view full answer...
• Options for Roof Rack on 2016 Toyota Highlander With Naked Roof
  Since you asked for the two top options for your 2016 Toyota Highlander with a naked roof, I'll go ahead and list out all the parts for the two best, which are from Yakima, and Rhino-Rack: Yakima Roof Rack - Yakima JetStream Crossbars - Black # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06130 Rhino-Rack Roof Rack - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - RCH Legs for Rhino-Rack Crossbars # RRRCH4 - Custom RCP Fit Kit # RRRCP37-BK Among these options...
  view full answer...
• Recommendation for Carrying 4 Bikes on a 2009 BMW 535i
  There may be a way for you to carry 4 bikes on your 2009 BMW 535i, however, there are only class I trailer hitches available for your vehicle. Class I trailer hitches are limited to carrying a maximum of 2 bikes on a bike rack because of the reduced tongue weight of the vehicle and hitch. The reason that only two bikes are recommended, on a hitch mounted bike rack, for Class I hitches is that the added torque applied to the hitch and vehicle frame will be too great for the setup, and...
  view full answer...
• Recommended Roof Rack for 2017 Lincoln MKZ
  The roof rack I recommend for a 2017 Lincoln MKZ is the Yakima JetStream Crossbar System which consist of part # Y00425, part # Y28TR, part # Y06110, and part # Y06102. This is an aero bar system which works great with most wrap-around style rooftop mounted accessories but can also be used with channel mounted accessories due to the integrated channels. The aero bar design also makes for the least amount of wind noise and best possible mpg's. Please note, modes with panoramic roofs are...
  view full answer...
• How Can I Use My Old Yakima Crossbars On My 2020 Jeep Grand Cherokee
  If you want to use your old Yakima crossbars on your 2020 Jeep Grand Cherokee with flush rails, your options will depend on what crossbars you have and the raised rails on your vehicle. Your first option will work on Jeep Grand Cherokees with the E-Group Package. If you have the old Yakima round bars, they must be at least 50" in length. This rack will consist of the following items: Your Yakima round crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails,...
  view full answer...
• Best Roof Rack for a 2013 Ram 1500
  Happy to help! Our site does have a lot of options which can often be confusing. The roof racks for your truck fit all three type of cab models but they are all listed individually which makes it look like there are more options. To add a Yakima roof rack to your 2013 Ram 1500 you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof...
  view full answer...
• Will A Yakima Roof Rack Fit On A 2019 Toyota Highlander Even With The Sloping Roof
  You should not have any problems with the roof on your 2019 Toyota Highlander. When Yakima redesigned their towers for naked roofs they add two additional adjustments, toe and pitch. A Yakima rack on a 2019 or a 2020 Toyota Highlander will have front tower pitch measurement of 6º and the rear tower pitch measurement of -6º. This is done precisely for the slope in the roof of the Toyota Highlander. I have included a picture of the pitch diagram from Yakima's installation manual below. Your...
  view full answer...
  
• Yakima Roundbar Roof Rack System Options For A 2024 Kia Seltos LX
  Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet. If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima Crossbars...
  view full answer...
• How Many Towers are Included in the Yakima Baseline Towers # Y00146?
  Yakima Baseline Towers # Y28TR comes with a total of 4 towers. If you are looking for a complete crossbar system that includes the Yakima Baseline towers, I would be happy to assist you if you confirm your year/make/model of vehicle.
  view full answer...
• Base Rack Needed to Carry Yakima SkyBox NX 16 on 2008 Nissan Rogue with Naked Roof
  When looking to carry the Yakima Skybox NX 16, # Y95AV, I recommend the Yakima Roof Rack System. For a complete system you will need the following parts: Round 48 Inch CrossBars, # Y00408. BaseLine towers, # Y28TR. RoundBar adapters, # Y03536. BaseClips, # Y06123 and # Y06135. Just a reminder, you will want to check your owner's manual to confirm how much weight the roof of your Nissan Rogue can safely handle. You will need to account for the weight of the roof rack, the cargo box and...
  view full answer...
• Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2013 Honda Civic Coupe
  The roof rack I recommend for you is the Yakima JetStream Roof Rack with 60 Inch Long JetStream Bars # Y00426, BaseLine Towers # Y28TR, Fit Kit # Y06125 for the front bar, and Fit Kit # Y06143 for the rear bar. The JetStream crossbars feature an aerodynamic shape to help minimalize wind noise and keep the ride quieter than racks that use more traditional round or square crossbars. This rack is designed to fit your Civic coupe and will mount in the door well for both the front and rear crossbars....
  view full answer...
  
• Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-Towers
  The aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
  view full answer...
• Lowest Cost Roof Rack Recommendation for 2020 Hyundai Santa Fe With Bare Roof
  The lowest priced roof rack option we offer for the 2020 Hyundai Santa Fe with a bare roof would be a round bar rack from Yakima. The rack would consist of the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima SL Round Bar Adapters, part # Y03536 • Base Clip Fit Kit # Y06151 • Base Clip Fit Kit # Y06154 Unfortunately, the Malone # MPG215 rack you'd looked at isn't' a fit for your Santa Fe. I've linked you to an...
  view full answer...
• Roof Rack to Fit a 2014 Toyota Prius to Carry Bikes and Skis
  Since you're looking at a number of components (a roof rack, 4 bike carriers, and a ski carrier) I recommend sticking with one manufacturer for all the pieces so you can have the locks all keyed the same if you choose. For the roof rack I like the Yakima round bar system using the 58 inch crossbars # Y00409, BaseLine Towers # Y28TR, adapter # Y03536, and BaseClip # Y06117. For the bikes a great carrier is the Yakima FrontLoader, part # Y02103. It'll fit on the round bars nicely and a...
  view full answer...
• Correct Parts for Yakima Roof Rack on a 2008 Toyota FJ Cruiser
  The recommended round crossbar rack for your factory rails would include the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536.
  view full answer...
• 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier Recommendation
  For a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
  view full answer...
  
• Can I Reuse Yakima Q Towers for 2021 Ford F-250
  In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
  view full answer...
• Can Yakima Q Tower Roof Rack Work With 2021 Toyota RAV4 With Roof Rails
  Although we have a Yakima roof rack solution that will work on your 2021 Toyota RAV4, the Q-towers are pretty much obsolete at this point, and they were not compatible with raised roof rack rails and were meant for use on bare roofs. The good news you can re-use your crossbars if they're at least 48 inches long. You can assemble a compatible round bar roof rack using the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima TimberLine Towers, part # Y33TR • Yakima...
  view full answer...
• Recommendation for Carrying 4 Bikes on a 2009 BMW 535i
  There may be a way for you to carry 4 bikes on your 2009 BMW 535i, however, there are only class I trailer hitches available for your vehicle. Class I trailer hitches are limited to carrying a maximum of 2 bikes on a bike rack because of the reduced tongue weight of the vehicle and hitch. The reason that only two bikes are recommended, on a hitch mounted bike rack, for Class I hitches is that the added torque applied to the hitch and vehicle frame will be too great for the setup, and...
  view full answer...
• How Can I Use My Old Yakima Crossbars On My 2020 Jeep Grand Cherokee
  If you want to use your old Yakima crossbars on your 2020 Jeep Grand Cherokee with flush rails, your options will depend on what crossbars you have and the raised rails on your vehicle. Your first option will work on Jeep Grand Cherokees with the E-Group Package. If you have the old Yakima round bars, they must be at least 50" in length. This rack will consist of the following items: Your Yakima round crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails,...
  view full answer...
• Yakima Roundbar Roof Rack System Options For A 2024 Kia Seltos LX
  Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet. If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima Crossbars...
  view full answer...
• Roof Rack Recommendation for a 2010 Subaru Outback Wagon with Raised Side Rails
  For your 2010 Subaru Outback with raised side rails you would need the Yakima roof rack components part numbers # Y00408, # Y03536 and # Y00147 to give you a set of crossbars so that you can install your Yakima cargo box.
  view full answer...
• Base Rack Needed to Carry Yakima SkyBox NX 16 on 2008 Nissan Rogue with Naked Roof
  When looking to carry the Yakima Skybox NX 16, # Y95AV, I recommend the Yakima Roof Rack System. For a complete system you will need the following parts: Round 48 Inch CrossBars, # Y00408. BaseLine towers, # Y28TR. RoundBar adapters, # Y03536. BaseClips, # Y06123 and # Y06135. Just a reminder, you will want to check your owner's manual to confirm how much weight the roof of your Nissan Rogue can safely handle. You will need to account for the weight of the roof rack, the cargo box and...
  view full answer...
• Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford Focus
  We carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
  view full answer...
• Can I Purchase a Half System of the 66 Yakima Round Crossbars?
  Yes, we do carry a option for a single Yakima Round Crossbar - 66" # Y8810025 for your 2020 Ford F-250 Super Duty (Super Cab). In addition to the crossbar, you will need two of the Replacement BaseLine Tower for Yakima Crossbars # 8880618, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185, and two of the Replacement RoundBar SL Adapter for Yakima StreamLine Towers - Qty 1 # 8880641. With that being said, in order to transport a kayak or a canoe on the top of your...
  view full answer...
• Yakima Roof Rack System to Fit 2017 Mazda CX-3
  I have a solution for you to install Yakima round crossbars on your 2013 Mazda CX-3 however, there are no Q Clips or Q Towers designed to fit. Instead you will want to use the BaseLine Towers # Y28TR with the RoundBar Adapters # Y03536. Then for the fit kit you'll use the BaseClips # Y06130 and # Y06132. Two of each BaseClip is needed. Yakima recommends 48 inch Round Crossbars # Y00408 for the CX-3.
  view full answer...
• Largest Roof Rack Recommendation for a 2016 Subaru Outback
  If you install the Yakima SkyLine Towers, # Y53TR, along with the Round Bar Adapter, # Y03536, and the Landing Pad, # Y00241, then you can install any length of the Yakima round crossbars that you wish. Yakima has a 78 inch crossbars, # Y00411, 66 inch crossbars, # Y00410, 58 inch crossbars, # Y00409, and 48 inch crossbars, # Y00408. It is okay to cut them down to a custom length as well if you feel like one is too long once it is installed. There are a few things to keep in mind. First,...
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford Ranger
  To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
  view full answer...
• Yakima Roof Rack Fitment on a 2013 Jeep Grand Cherokee Overland
  I can help you find the right Yakima roof rack for your 2013 Jeep Grand Cherokee Overland. If your Overland has the E group package you will see a metal strip in the flush mounted rails, the Yakima kit you will need is the # Y00408 in combination with # Y53TR, # Y03536, and # Y00244. This kit will include the round crossbars, the RailGrab Towers, and the Raised Side Rail adapters. If your Overland doesn't have the E group it will have a black plastic rail and the Yakima kit you will need...
  view full answer...
• Parts Needed to Add a Yakima Roof rack to a 2012 Subaru Impreza Hatchback
  The 2012 Subaru Impreza hatchback with naked roof uses Q-clips Q83 for both front and back but that system has been discontinued by the manufacturer. If you can't find them used, then n you will need to upgrade but you can still use your round bars. What you will need is the Skyline towers # Y53TR, Round Bar Adapter # Y03536, and Launch Pad 22 # Y00248. I also recommend using sks locks # Y07204.
  view full answer...
• Is Rhino Rack Roof Rack Compatible with 2011 Toyota Venza with Sunroof
  Sounds like your 2011 Toyota Venza has a panoramic glass roof. Currently Rhino-Rack has no roof rack that is a fit for the panoramic glass roof. However we do have a solution for you. The Yakima roof rack, which consists of parts 58" crossbars # Y00409, BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06129 and # Y06131 is a confirmed fit for your Venza. Please consult the vehicle owners manual and/or Toyota for the roof weight carrying capacity prior to loading.
  view full answer...
• What Size Screw is Required for 2012 Mazda CX-9 Roof Rack?
  If you are looking for the screw size for the factory mount locations, you will use M6 screws that are 35 mm long which come in the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points # DK289. For a roof rack, I recommend this fit kit along with the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 and the 2500 Series Legs # RRRLKVA. Since you asked from a Yakima bar, the Yakima fit kit uses M6x28mm, M6x33mm and M6x40mm hardware as well as M8x35mm. These...
  view full answer...
• Can 48 inch Yakima Crossbars Fit on 2008 Mazda 3 5 Door
  Since the Q Tower system is no longer the current roof rack Yakima roof rack and has been phased out we don't have the parts needed to install a Q Tower setup with 48 inch long bars but I was able to check with Yakima and the 48 inch bars are correct for your vehicle. The current roof rack components needed are the BaseLine Roof Rack part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
  view full answer...
• Carrying 4 Bikes on a 2017 Toyota Prius Prime
  I may have a solution for you. However, you aren't able to use the Yakima DoubleDown Ace on your 2017 Toyota Prius Prime to carry four bikes. The hitch receivers for your vehicle, like the Draw-Tite # 24966, are Class I receivers and the DoubleDown Ace fits Class II and Class III receivers. In addition to that a Class I hitch is only able to carry up to 2 bikes. Instead to carry 4 bikes on your car I recommend using a hitch mount bike rack like the Swagman Titan, part # S63400, to carry...
  view full answer...
• Equipment Needed to Carry Roof Cargo Box and 4 Pairs of Skis on 2013 Hyundai Santa Fe Sport
  If you used the Thule SnowPack ski carrier, part # TH7324 that can carry 4 pairs of skis or two snowboards and the Thule Pulse # TH615 with its 16 cubic foot capacity, you'd need roof crossbars that have at least 57 inches of space. If your Hyundai Sport has a bare roof, you can install a Yakima Roof Rack that would offer plenty of space for the ski rack and cargo box mentioned above. The rack would consist of the following parts: 66 Inch Long RoundBars, part # Y00410 BaseLine towers,...
  view full answer...
• Lowest Profile Roof Rack For 2021 Hyundai Palisade
  It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars # Y00425 The Ridgeline Towers # Y00145 and the ridgeclip # Y89FR. This leaves about an inch or so from where your sunroof is when it's open. If you have a naked roof, you can get these crossbars # Y00426, baseline towers # Y28TR and these two baseclip kits # Y06145 and # Y06138. This will be just above your sunroof when...
  view full answer...
• Aero Bar Roof Rack that Fits 2022 Toyota Tacoma Access Cab
  Since Rhino Rack states it can't fit the Access Cab models that would be the correct fit info. So for a similar roof rack that does fit the Access Cab of your 2022 Toyota Tacoma we have the Yakima JetStream part numbers # Y00425, # Y28TR, # Y06145, # Y06128.
  view full answer...
• What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper Shell
  You will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
  view full answer...
• Can I Use Yakima Crossbars And Skyline Towers On A 2020 Toyota Tacoma Double Cab
  I can certainly point you in the right direction. Since your 2020 Tacoma Does not have the fixed mounting points, you will not be able to re-use your Skyline Towers. The SkyLine Towers can only be used with fixed mounting points, flush rails and track systems. You will however, be able to re-use your Yakima crossbars. We recommend a minimum 50" crossbar for the 2020 Tacoma Double Cab. So as long as your crossbars are 50" (or longer), we can set you up. You will need the following parts...
  view full answer...
• Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota Tacoma
  For a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
  view full answer...
  
• Yakima Roof Rack Components Fit HD Bar Setup on 2020 Toyota Tacoma with Naked Roof
  Yakima does have an HD roof rack that fits your 2020 Toyota Tacoma with a naked roof but the correct towers for your vehicle are the Baseline towers and not the Skyline. What you would need is the following components # Y01156, # Y28TR, # Y03541, # Y06145, and # Y06128. The fit kit you mentioned does not fit your truck. Since you already have the bars you may not need the part # Y01156 as well.
  view full answer...
• Will Yakima Q Towers Fit a 2009 Honda Fit
  I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y28TR - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll need both...
  view full answer...
• Solution for Transporting Kayak on 2017 Toyota Tacoma with Extang Encore Tonneau Cover Installed
  I have a couple possible solutions for you to transport your kayak with your 2017 Toyota Tacoma, however there is not a standard ladder rack available that is compatible with the Extang Encore Tonneau Cover. This is because the hardware for the Encore Tonneau Cover partially covers the top of the bed rails and any ladder rack will either require access to the inside of the bed rails or complete access to the stake pockets. The first option for your setup is to add a rail system and crossbars...
  view full answer...
• Carrying 19 Foot Canoe on Yakima Overhaul HD Ladder Rack on 2021 Toyota Tacoma
  It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and works perfectly on the Tacoma. The version that mounts to the utility tracks # Y01151-5868 has a maximum crossbar spread of 40". You can see that measurement around the 3:20 minute mark in the video I attached below. For the version that installs onto tonneau...
  view full answer...
• Roof Rack And Canoe Carrier For A 2020 Hyundai Palisade With A Naked Roof
  For your 2020 Hyundai Palisade, we do have a couple of options for a roof rack. The first option you can use is the Yakima JetStream Crossbars # Y00426 with the towers # Y28TR, and the fit kit # Y06145 & # Y06138. These cross bars are rated for 165lbs, and measure 60" long. These cross bars are aerodynamic, have a t-track channel for roof mounted accessories, and will provide a quiet, low-profile option that will work great with your Palisade. The other option you can choose from is...
  view full answer...
• Most Factory Looking Roof Rack for a 2024 Hyundai Palisade w/out Roof Rails
  Yes, there is a roof rack for your 2024 Hyundai Palisade that won't overhang the mounting legs. It is the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138
  view full answer...
• Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?
  Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
  view full answer...
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Recommended Roof Rack for a 2020 Hyundai Palisade
  The roof rack I recommend for a 2020 Hyundai Palisade is will be dependant on the roof type. If you have flush side rails then I recommend the Thule WingBar Evo Crossbar System part # TH711420, part # TH460R, and part # THKIT4093. If you have a bare roof then I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06145, and part # Y06138. These are both top of the line systems with custom fits and aero shaped crossbars for the least wind resistance.
  view full answer...
• Roof Rack Recommendation for 2020 Hyundai Palisade With No Rails or Crossbars
  Although we don't offer a roof rack option that would provide the side rails, we do offer roof rack options that would work for your 2020 Hyundai Palisade. For a Yakima round bar roof rack, you'd need the following parts: • Yakima 58 inch round crossbars, part # Y00409 • Yakima BaseLine Towers, part # Y28TR • Yakima SL Adapters, part # Y03536 • Yakima Base Clips # Y06145 • Yakima Base Clips # Y06138 You might want to consider going with an aero-style crossbar, however. The round bars...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2018 Toyota Tacoma Couble Cab
  You'd need a roof rack confirmed to fit your 2018 Toyota Tacoma Double Cab with longer crossbars like the Yakima Corebar Rack part numbers # Y00422, # Y28TR, # Y06145, and # Y06128 which has 60 inch long crossbars. You could easily use a SweetRoll # Y04074 for each of your kayaks then with this rack. This leaves your truck bed open for the tonneau cover and would work well.
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Roof Rack Recommendation for Carrying Kayak on a 2014 Nissan Juke
  First you'll need a roof rack on your 2014 Nissan Juke. For this I suggest the Yakima system that consists of: 50 inch CoreBars - # Y00421 BaseLine Towers - # Y28TR Fit Kits - # Y06145 and # Y06138 Then to carry the kayak the Thule DockGrip # TH895. The DockGrip holds your kayak using saddles and also includes the bow and stern tie-downs you'll need. To make it easier to connect the tie-downs use the Thule Quick Loops # TH530.
  view full answer...
• Carrying Bikes And Towing A Motorcycle Trailer On My 2001 Honda Civic
  The Swagman Original 4 Bike Towing Rack for 2" Trailer Hitches - Tilting, part # S64675, is only made for Class III, 2" hitch receivers. Unfortunately, the smallest hitch receiver that you can use with a dual hitch adapter is Class III or 2" hitch receiver. Your receiver's tongue weight is reduced by 50% when using an adapter, that would reduce the capability of your hitch receiver, which is either Class I or Class II, to an amount that would render the adapter ineffective. I do have an...
  view full answer...
• Parts Needed to Install Yakima Round Bar Roof Rack on 2016 Toyota Tacoma Double Cab
  Since the Q Tower style of Yakima roof rack is being phased out they don't have a set of Q Clips that fit a 2017 Toyota Tacoma double cab at this time but we do have a solution that would work for you. If you have a set of round bars like the part # Y00408 they recommend for your vehicle you can piece together the rest of the roof rack that you'd need. You'll want the BaseLine Towers part # Y28TR, RoundBar SL Adapter # Y03536, the BaseClip kit part # Y06145, and BaseClip kit part # Y06128.
  view full answer...
• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Rack for Rooftop Tent with Tonneau Cover for 2017 Toyota Tacoma
  The best way to mount a roof-top tent to your 2017 Toyota Tacoma with a Truxedo LoPro tonneau cover is using a roof rack like Yakima's CoreBar Crossbars Roof Rack System: # Y00421, # Y28TR, # Y06145, # Y06128. With the way your tonneau cover secures to your bed and the lack of stake-pockets on the Tacoma there isn't a ladder rack available for your Tacoma that works together with your tonneau. I like the CoreBar system because it has a high capacity and it looks good. One thing that...
  view full answer...
• Recommended Roof Rack and Fairing for a 2020 Hyundai Palisade
  Although the Rola 59762 roof rack isn't a fit for your 2020 Hyundai Palisade, I'd be happy to make a recommendation. The rack you need will depend on what's currently on the roof of your Palisade, if it's a bare roof or has flush mounted side rails. If you have a bare roof, a round-bar roof rack from Yakima would be your most economical option. The rack would consist of the following parts: -Round crossbars, part # Y00409 -BaseLine Towers, part # Y28TR -Round Bar Adapter, part # Y03536 -Vehicle...
  view full answer...
• Roof Rack for Snowboard Carrier Recomendation 2017 Subaru Legacy with Naked Roof
  For your 2017 Subaru Legacy with a naked roof you will first need to install a roof rack with crossbars that run from side to side so that you can mount a snowboard rack. Since you like Yakima their round bar roof rack that consists of part numbers # Y00409, # Y28TR, # Y03536, # Y06145, and # Y06130 would be where you would want to start. Then depending on how many boards you want to carry we have a couple options. We have the part # Y03095 which will carry up to 2 board or the part #...
  view full answer...
• Lowest Profile Roof Rack For 2021 Hyundai Palisade
  It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars # Y00425 The Ridgeline Towers # Y00145 and the ridgeclip # Y89FR. This leaves about an inch or so from where your sunroof is when it's open. If you have a naked roof, you can get these crossbars # Y00426, baseline towers # Y28TR and these two baseclip kits # Y06145 and # Y06138. This will be just above your sunroof when...
  view full answer...
• Aero Bar Roof Rack that Fits 2022 Toyota Tacoma Access Cab
  Since Rhino Rack states it can't fit the Access Cab models that would be the correct fit info. So for a similar roof rack that does fit the Access Cab of your 2022 Toyota Tacoma we have the Yakima JetStream part numbers # Y00425, # Y28TR, # Y06145, # Y06128.
  view full answer...
• What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper Shell
  You will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
  view full answer...
• Can I Use Yakima Crossbars And Skyline Towers On A 2020 Toyota Tacoma Double Cab
  I can certainly point you in the right direction. Since your 2020 Tacoma Does not have the fixed mounting points, you will not be able to re-use your Skyline Towers. The SkyLine Towers can only be used with fixed mounting points, flush rails and track systems. You will however, be able to re-use your Yakima crossbars. We recommend a minimum 50" crossbar for the 2020 Tacoma Double Cab. So as long as your crossbars are 50" (or longer), we can set you up. You will need the following parts...
  view full answer...
• Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota Tacoma
  For a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
  view full answer...
  
• Yakima Roof Rack Components Fit HD Bar Setup on 2020 Toyota Tacoma with Naked Roof
  Yakima does have an HD roof rack that fits your 2020 Toyota Tacoma with a naked roof but the correct towers for your vehicle are the Baseline towers and not the Skyline. What you would need is the following components # Y01156, # Y28TR, # Y03541, # Y06145, and # Y06128. The fit kit you mentioned does not fit your truck. Since you already have the bars you may not need the part # Y01156 as well.
  view full answer...
• Will Yakima Q Towers Fit a 2009 Honda Fit
  I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y28TR - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll need both...
  view full answer...
• Solution for Transporting Kayak on 2017 Toyota Tacoma with Extang Encore Tonneau Cover Installed
  I have a couple possible solutions for you to transport your kayak with your 2017 Toyota Tacoma, however there is not a standard ladder rack available that is compatible with the Extang Encore Tonneau Cover. This is because the hardware for the Encore Tonneau Cover partially covers the top of the bed rails and any ladder rack will either require access to the inside of the bed rails or complete access to the stake pockets. The first option for your setup is to add a rail system and crossbars...
  view full answer...
• Carrying 19 Foot Canoe on Yakima Overhaul HD Ladder Rack on 2021 Toyota Tacoma
  It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and works perfectly on the Tacoma. The version that mounts to the utility tracks # Y01151-5868 has a maximum crossbar spread of 40". You can see that measurement around the 3:20 minute mark in the video I attached below. For the version that installs onto tonneau...
  view full answer...
• Roof Rack And Canoe Carrier For A 2020 Hyundai Palisade With A Naked Roof
  For your 2020 Hyundai Palisade, we do have a couple of options for a roof rack. The first option you can use is the Yakima JetStream Crossbars # Y00426 with the towers # Y28TR, and the fit kit # Y06145 & # Y06138. These cross bars are rated for 165lbs, and measure 60" long. These cross bars are aerodynamic, have a t-track channel for roof mounted accessories, and will provide a quiet, low-profile option that will work great with your Palisade. The other option you can choose from is...
  view full answer...
• Most Factory Looking Roof Rack for a 2024 Hyundai Palisade w/out Roof Rails
  Yes, there is a roof rack for your 2024 Hyundai Palisade that won't overhang the mounting legs. It is the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138
  view full answer...
• Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?
  Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
  view full answer...
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Recommended Roof Rack for a 2020 Hyundai Palisade
  The roof rack I recommend for a 2020 Hyundai Palisade is will be dependant on the roof type. If you have flush side rails then I recommend the Thule WingBar Evo Crossbar System part # TH711420, part # TH460R, and part # THKIT4093. If you have a bare roof then I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06145, and part # Y06138. These are both top of the line systems with custom fits and aero shaped crossbars for the least wind resistance.
  view full answer...
• Roof Rack Recommendation for 2020 Hyundai Palisade With No Rails or Crossbars
  Although we don't offer a roof rack option that would provide the side rails, we do offer roof rack options that would work for your 2020 Hyundai Palisade. For a Yakima round bar roof rack, you'd need the following parts: • Yakima 58 inch round crossbars, part # Y00409 • Yakima BaseLine Towers, part # Y28TR • Yakima SL Adapters, part # Y03536 • Yakima Base Clips # Y06145 • Yakima Base Clips # Y06138 You might want to consider going with an aero-style crossbar, however. The round bars...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2018 Toyota Tacoma Couble Cab
  You'd need a roof rack confirmed to fit your 2018 Toyota Tacoma Double Cab with longer crossbars like the Yakima Corebar Rack part numbers # Y00422, # Y28TR, # Y06145, and # Y06128 which has 60 inch long crossbars. You could easily use a SweetRoll # Y04074 for each of your kayaks then with this rack. This leaves your truck bed open for the tonneau cover and would work well.
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Roof Rack Recommendation for Carrying Kayak on a 2014 Nissan Juke
  First you'll need a roof rack on your 2014 Nissan Juke. For this I suggest the Yakima system that consists of: 50 inch CoreBars - # Y00421 BaseLine Towers - # Y28TR Fit Kits - # Y06145 and # Y06138 Then to carry the kayak the Thule DockGrip # TH895. The DockGrip holds your kayak using saddles and also includes the bow and stern tie-downs you'll need. To make it easier to connect the tie-downs use the Thule Quick Loops # TH530.
  view full answer...
• Carrying Bikes And Towing A Motorcycle Trailer On My 2001 Honda Civic
  The Swagman Original 4 Bike Towing Rack for 2" Trailer Hitches - Tilting, part # S64675, is only made for Class III, 2" hitch receivers. Unfortunately, the smallest hitch receiver that you can use with a dual hitch adapter is Class III or 2" hitch receiver. Your receiver's tongue weight is reduced by 50% when using an adapter, that would reduce the capability of your hitch receiver, which is either Class I or Class II, to an amount that would render the adapter ineffective. I do have an...
  view full answer...
• Parts Needed to Install Yakima Round Bar Roof Rack on 2016 Toyota Tacoma Double Cab
  Since the Q Tower style of Yakima roof rack is being phased out they don't have a set of Q Clips that fit a 2017 Toyota Tacoma double cab at this time but we do have a solution that would work for you. If you have a set of round bars like the part # Y00408 they recommend for your vehicle you can piece together the rest of the roof rack that you'd need. You'll want the BaseLine Towers part # Y28TR, RoundBar SL Adapter # Y03536, the BaseClip kit part # Y06145, and BaseClip kit part # Y06128.
  view full answer...
• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Rack for Rooftop Tent with Tonneau Cover for 2017 Toyota Tacoma
  The best way to mount a roof-top tent to your 2017 Toyota Tacoma with a Truxedo LoPro tonneau cover is using a roof rack like Yakima's CoreBar Crossbars Roof Rack System: # Y00421, # Y28TR, # Y06145, # Y06128. With the way your tonneau cover secures to your bed and the lack of stake-pockets on the Tacoma there isn't a ladder rack available for your Tacoma that works together with your tonneau. I like the CoreBar system because it has a high capacity and it looks good. One thing that...
  view full answer...
• Recommended Roof Rack and Fairing for a 2020 Hyundai Palisade
  Although the Rola 59762 roof rack isn't a fit for your 2020 Hyundai Palisade, I'd be happy to make a recommendation. The rack you need will depend on what's currently on the roof of your Palisade, if it's a bare roof or has flush mounted side rails. If you have a bare roof, a round-bar roof rack from Yakima would be your most economical option. The rack would consist of the following parts: -Round crossbars, part # Y00409 -BaseLine Towers, part # Y28TR -Round Bar Adapter, part # Y03536 -Vehicle...
  view full answer...
• Roof Rack for Snowboard Carrier Recomendation 2017 Subaru Legacy with Naked Roof
  For your 2017 Subaru Legacy with a naked roof you will first need to install a roof rack with crossbars that run from side to side so that you can mount a snowboard rack. Since you like Yakima their round bar roof rack that consists of part numbers # Y00409, # Y28TR, # Y03536, # Y06145, and # Y06130 would be where you would want to start. Then depending on how many boards you want to carry we have a couple options. We have the part # Y03095 which will carry up to 2 board or the part #...
  view full answer...

Do you have a question about this Roof Rack?