Roof Rack and Extended Crossbars to Mount Two Hullavators on a 2020 Hyundai Palisade  

Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…

Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put on an aftermarket…

Good question, and in regards to the width of the Thule Hullavator Pro #TH898, it is 36 inches, though its mounting takes up crossbar space of only 28-1/2 inches because a portion of it will be over the edge of the crossbar (see the accompanying…

It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars #Y00425 The Ridgeline Towers #Y00145 and the ridgeclip #Y89FR. This leaves…

The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to…

It does not. I checked with Thule and they list a Thule WingBar Edge Crossbar item #TH29RE and a Edge Flush Rail Feet item #TH89SC as parts fitting a 2021 Hyundai Palisade with side rails. You would need the Thule 186008 to install this system and I…

The Thule Hullavator part #TH898 is a really great option for a load assist kayak carrier that would work great for you but it does require an aftermarket roof rack install on your 2021 Subaru Outback as it requires the crossbars of the rack to…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898. BaseLine Towers…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…