See what our Experts say about this Yakima Roof Rack

• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Can 78" Yakima HD Bars for 2018 Ford F-150 BedRock be Cut for Custom Length
  The Yakima BedRock HD Truck Bed Rack # Y01160-59 with the 78" crossbars is what Yakima test fit for your 2018 Ford F-150 and since the next size down is 10" less with the 68" HD Bars # Y01158 I am a little skeptical that the system would work. I reached out to my contact at Yakima who also had hesitations about the 68" bars fitting and they also said that ultimately you can cut the HD bars if you really want to but they don't really recommend doing that because you won't be able to fit...
  view full answer...
  
• Will the Malone BigFoot Pro Canoe Roof Rack w/ Tie-Downs Fit the Yakima Overhaul HD Crossbars?
  Hello Steven, Yes, you can use the Malone BigFoot Pro Canoe Roof Rack w/ Tie-Downs - Gunwale Brackets - Clamp On # MPG112MD on the Yakima HD Crossbars - Aluminum - Black - 68" Long - Qty 2 # Y01158. The Yakima Overhaul HD Bars are 3" wide x 1-1/2" tall, and the Malone BigFoot Pro Canoe Roof Rack works on bars that are up to 3 1/2" wide and 1 1/2" tall. What kind of canoe are you hauling?
  view full answer...
• Replacement EndCap for Yakima HD Crossbars
  Hey Randy, welcome back. The Replacement EndCap for Yakima HD Crossbars item # YA54FR is the only option available. They don't make other short endcaps for the Yakima HD Crossbars like item # Y01158. What do you use your roof rack for? You can add this information, along with any other questions you have, where it says Add Comment.
  view full answer...
• Does The Length of the Yakima HD Crossbars Include The End Caps?
  The 60" Yakima HD Crossbars # Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars # Y01158.
  view full answer...
• Replacement Top Channel Crossbar Infill for Yakima HD Crossbars
  Hey Randy, welcome back. To replace the infill covers on your Yakima HD Crossbars item # Y01158 you will need the Replacement Top Channel Crossbar Infill item # Y33KV. If you have any additional questions, go ahead and click on the box below that says Reply to Jerred H and I'll be happy to answer them.
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• 68 inch Crossbar Roof Rack Recommendation for 2025 Subaru Forester with Raised Rails
  Hey Tim, for a 68 inch crossbar roof rack that fits your 2025 Subaru Forester you would need the Yakima HD crossbars part # Y01158 and the Yakima Timberline feet part # Y33TR and you'd be set.
  view full answer...
• Availability Of Single 68" Yakima HD Crossbar
  Hello Arie; yes, we do! Take a look at the following: - Yakima HD Crossbar - Aluminum - 68" Long - Qty 1 # Y95FR
  view full answer...
• Will Malone T-Slot Adapter Kit Fit on Yakima HD Crossbars
  Thanks for reaching out, Darryl! I believe you're talking about the Yakima HD Crossbars, like the 68" # Y01158. If this is the case then yes, the Aero Style Crossbar T-Slot Fit Kit for Malone Kayak and Surfboard Carriers # MPG915 is compatible with this crossbar style. If you have a different crossbar system please let me know and I'll be happy to help you look into this further.
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Replacement Top Channel Infill For Yakima HD 68" Crossbars
  The Replacement Top Channel Crossbar Infill for Yakima HD Style Crossbars # Y33KV is the Yakima 8881036 and the correct insert for your Yakima HD Crossbars # Y01158. The Replacement Top Infill # Y01166 is the Yakima part number 8001166 which fits both the HD bars and JetStream crossbars. The # Y01166 is 76" long to fit the longest JetStream while the # Y33KV is 74-13/16" long fitting up to the 78" HD Bars # Y01159.
  view full answer...
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• What High-Capacity Kayak Carrier Fits Yakima HD Crossbars?
  You are definitely correct that the Yakima JayLow # Y04073 has a weight capacity of 80 pounds. For your 95-pound kayak, we need to pull out the heavy artillery. For a great kayak carrier that can mount to Yakima HD Crossbars like the # Y01158, I recommend the Yakima BigCatch # Y04091. I confirmed with my tech at Yakima that the clamps on this carrier definitely fit the HD crossbars. The BigCatch comes with a massive 150-pound weight capacity. Since the carrier is a saddle-style design,...
  view full answer...
• Yakima HD Cross Bars T-Slot Dimensions
  The T-slot channel dimensions for the Yakima HD Crossbars # Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with our review on the crossbars!
  view full answer...
  
• Recommended Crossbar Size for Yakima Overhaul HD on 2019 Ram 2500
  You really could use either one of the 68" # Y01158 or 78" # Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars # Y01158. Obviously having longer bars means more space, but the usable space outside of the bars really isn't all that beneficial since it's not going to be able to bear heavier loads. The only time I would recommend going with longer bars in this case is if you were using an awning...
  view full answer...
• Can Longer Crossbars Be Used On A Yakima OverHaul HD Ladder Rack On A 2023 Toyota Tacoma
  Yakima lists that the minimum crossbar size required for the 2023 Toyota Tacoma as 60". We typically just list the requirements and not every single fit that could work when it comes to just the crossbar size. The larger 68" crossbars # Y01158 would still work with the OverHaul towers on your 2023 Toyota Tacoma.
  view full answer...
• Can Yakima JayLow Kayak Carrier be Installed on Yakima HD Bars Using T-Slot
  The Yakima JayLow Kayak Carrier w/ Tie-Downs # Y04073 doesn't have a T-Slot adapter but they do fit crossbars with max dimensions of 3-1/2" x 1-11/16". Since the Yakima HD Crossbars like the 68" # Y01158 only measure 3" wide x 1-1/2" tall you will be able to use the clamping system that comes with the JayLow to mount them to this size crossbar. If you're wanting a way to secure them a little bit more to help deter theft then I recommend adding the 2-pack lock core set # Y07202. If you're...
  view full answer...
• What are the T-Slot Dimensions of Yakima HD Crossbars and Rhino-Rack Aero Crossbars?
  If you are looking for crossbars that can accommodate the 12mm T-slots, the closest confirmed top channels we have are Yakima crossbars like the Yakima HD Crossbars - Aluminum - Black - 68" # Y01158 or Rhino-Rack crossbars like the Rhino-Rack Vortex Aero crossbars # RRVA126B-2. Both of these brands use crossbars with 7/16" (11.1mm) top channel openings. I went ahead and attached diagrams that outline the dimensions of these two examples. If you have a particular accessory that you need...
  view full answer...
  
• Will Yakima Baseline Towers Work with Thule ProBar Evo Crossbars
  I do have an option for you but the Thule ProBar Evo Crossbars like part # TH713600 are not compatible with the Yakima Baseline Towers. In order to use the Thule ProBar Evo Crossbars you'll need the Evo Clamp Feet for Thule Crossbars part # TH710501 and subsequent vehicle specific fit kit. The other option would be to simply use the Yakima HD Crossbars like part # Y01158. I have attached a full list of sizes below for this crossbar. The channel dimensions which the crossbars mount to are...
  view full answer...
• Does Thule Hullavator Fit Yakima HD Crossbars Using T-Slots
  Yes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• What Size Channel Do Yakima Y01166 Top Infill Strips for HD Crossbars Fit Into?
  The Yakima # Y01166 Replacement Top Infill Strips are designed for the T-slots used on Yakima HD crossbars like # Y01158. The strips are meant to fit into a 11mm wide channel that widens to 22mm, as shown in the provided diagram. If you'd care to reply with the width of the T-slots on your factory crossbars, I can look for other fits if these won't work for you.
  view full answer...
  
• Parts Needed to Use Yakima HD Crossbars w/ Retrax XR Pro Tonneau Cover w/ T Slots
  Yes, the Yakima HD 68” crossbars 68” Item # Y01158 will work with your F-150. Yours are the same length as the ladder racks that fit your truck. The only way to mount Yakima HD crossbars to the slots of a Retrax Pro Tonneau cover like item # RTX32SR is to use the Yakima OutPost HD Overland Truck Bed Rack Uprights item # Y01152 and the Tonneau Cover Adapter Kit item # Y01155. There's no feet kit for tonneau covers that are compatible with HD crossbars. These uprights are 13" tall and...
  view full answer...
  
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Roof Rack For A 2023 Toyota 4Runner And A Yakima SkyBox
  We can definitely help set you up with a Yakima SkyBox NX 16 # Y95AV for the top of your 2023 Toyota 4Runner with the factory raised rails. All you will need to do is install a roof rack with crossbars. Since you are doing a Yakima brand roof box, it is best to go with a Yakima brand roof rack as well, since everything will be directly compatible. The Yakima JetStream crossbars will be a great fit for your vehicle. The complete roof rack consists of the following parts: Yakima JetStream...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• What is the Largest Cargo Box I Can Mount on My 2018 Jeep Grand Cherokee?
  The largest Thule cargo box that will fit your 2018 Jeep Grand Cherokee is the Thule Motion XT Rooftop Cargo Box - 22 cu ft - Titan Glossy # TH629907. If you want a Thule roof rack that is compatible with your 2018 Jeep Grand Cherokee that will be compatible with the Thule Motion XT, I recommend the following system: - Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 # TH711400 - Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 # TH460R - Fit Kit for Thule...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super Duty
  We can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
  view full answer...
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• Yakima Roof Rack Parts for 2018 Subaru WRX
  Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
  view full answer...
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5
  The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
  view full answer...
• Longest Roof Rack Bars That Fit a 2015 Subaru Impreza Hatchback
  Since you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
  view full answer...
• 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier Recommendation
  For a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
  view full answer...
  
• Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side Rails
  For your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
  view full answer...
• Method to Reduce Wind Noise from Roof Rack on 2014 Mazda 3
  Roof rack crossbars do generate noise and some make more noise than others. Round and square bar roof racks tend to be the noisiest and elliptical and aerodynamic bars tend to make less noise. No roof rack will be particularly quiet when you have your sunroof open. That is just the nature of the beast. You can sometimes reduce the noise level of a roof rack by adding a fairing to the front bar, such as Inno's # INA262. These usually help the noisier round and square bar roof racks like...
  view full answer...
• Roof Rack for 2012 Ford Transit Connect with Longer Crossbars
  The longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
  view full answer...
• Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16
  For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
  view full answer...
• What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof Rack
  For your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
  view full answer...
• Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting Points
  For the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
  view full answer...
• Roof Rack for a 2018 Subaru WRX to use OEM Subaru Acessories
  I recommend the Yakima Jet Stream kit for your application, based on the shape of the previous bars you had. This kit provides you with aero shaped bars that are very similar to the 2011 Subaru Impreza's factory bars. This rack installs into the fixed points on your roof, however is not compatible if you have a glass roof on your Subaru. The kit consists of: JetStream Crossbars, 50 inches, part # Y00425 SkyLine Towers, part # Y53TR Landing Pad 11 for Yakima Towers, part # Y00233 This...
  view full answer...
• Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with Sunroof
  I have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
  view full answer...
• Roof Rack Options for Adding a Yakima SkyRise Tent on a 2011 Subaru Forester
  To determine if the factory crossbars on your 2011 Subaru Forester are compatible with a rooftop tent you will first need to see if there are any specifications for the tent. For example, the Yakima SkyRise, part # Y07436 for 2 people, requires that your roof rack be supported and no higher than 98" off of the ground. Both the roof of your vehicle and the roof rack need to have a minimum load capacity of 165 lbs as well. I have attached a photo that you can use as a guideline for your...
  view full answer...
  
• Recommended Roof Rack for 2017 Subaru Impreza Sport
  I do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
  view full answer...
• Roof Rack Recommendation for a 2009 Ford Flex with Vista Roof
  You will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
  view full answer...
• Recommended Roof Rack For a 2013 Ford Transit Connect
  I recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
  view full answer...
• Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked Roof
  There are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
  view full answer...
• Recommendation for Carrying 2 Kayaks on a 2017 Subaru Impreza
  We do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
  view full answer...
• Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?
  We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
  view full answer...
• Bike Carrying Recommendations for 2012 Mazda 3 Hatchback
  The Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
  view full answer...
• Yakima Roof Rack Components Needed For A 2015 Kia Soul
  Idk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
  view full answer...
  
• Roof Rack Recommendation for 2016 Subaru WRX STi
  We do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
  view full answer...
• Recommendation for Carrying 4 Bikes on BMW 535i
  The 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
  view full answer...
• Yakima Roof Rack Parts for 2018 Subaru WRX
  Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
  view full answer...
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5
  The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
  view full answer...
• Longest Roof Rack Bars That Fit a 2015 Subaru Impreza Hatchback
  Since you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
  view full answer...
• 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier Recommendation
  For a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
  view full answer...
  
• Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side Rails
  For your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
  view full answer...
• Method to Reduce Wind Noise from Roof Rack on 2014 Mazda 3
  Roof rack crossbars do generate noise and some make more noise than others. Round and square bar roof racks tend to be the noisiest and elliptical and aerodynamic bars tend to make less noise. No roof rack will be particularly quiet when you have your sunroof open. That is just the nature of the beast. You can sometimes reduce the noise level of a roof rack by adding a fairing to the front bar, such as Inno's # INA262. These usually help the noisier round and square bar roof racks like...
  view full answer...
• Roof Rack for 2012 Ford Transit Connect with Longer Crossbars
  The longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
  view full answer...
• Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16
  For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
  view full answer...
• What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof Rack
  For your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
  view full answer...
• Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting Points
  For the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
  view full answer...
• Roof Rack for a 2018 Subaru WRX to use OEM Subaru Acessories
  I recommend the Yakima Jet Stream kit for your application, based on the shape of the previous bars you had. This kit provides you with aero shaped bars that are very similar to the 2011 Subaru Impreza's factory bars. This rack installs into the fixed points on your roof, however is not compatible if you have a glass roof on your Subaru. The kit consists of: JetStream Crossbars, 50 inches, part # Y00425 SkyLine Towers, part # Y53TR Landing Pad 11 for Yakima Towers, part # Y00233 This...
  view full answer...
• Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with Sunroof
  I have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
  view full answer...
• Roof Rack Options for Adding a Yakima SkyRise Tent on a 2011 Subaru Forester
  To determine if the factory crossbars on your 2011 Subaru Forester are compatible with a rooftop tent you will first need to see if there are any specifications for the tent. For example, the Yakima SkyRise, part # Y07436 for 2 people, requires that your roof rack be supported and no higher than 98" off of the ground. Both the roof of your vehicle and the roof rack need to have a minimum load capacity of 165 lbs as well. I have attached a photo that you can use as a guideline for your...
  view full answer...
  
• Recommended Roof Rack for 2017 Subaru Impreza Sport
  I do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
  view full answer...
• Roof Rack Recommendation for a 2009 Ford Flex with Vista Roof
  You will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
  view full answer...
• Recommended Roof Rack For a 2013 Ford Transit Connect
  I recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
  view full answer...
• Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked Roof
  There are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
  view full answer...
• Recommendation for Carrying 2 Kayaks on a 2017 Subaru Impreza
  We do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
  view full answer...
• Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?
  We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
  view full answer...
• Bike Carrying Recommendations for 2012 Mazda 3 Hatchback
  The Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
  view full answer...
• Yakima Roof Rack Components Needed For A 2015 Kia Soul
  Idk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
  view full answer...
  
• Roof Rack Recommendation for 2016 Subaru WRX STi
  We do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
  view full answer...
• Recommendation for Carrying 4 Bikes on BMW 535i
  The 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
  view full answer...

Do you have a question about this Roof Rack?