Replacement Top Channel Crossbar Infill for Yakima HD Crossbars

Question

Question:

Which infill strips do I order for the Yakima Y01158?

asked by: Randy D

0

Expert Reply:

Hey Randy, welcome back. To replace the infill covers on your Yakima HD Crossbars item # Y01158 you will need the Replacement Top Channel Crossbar Infill item # Y33KV.

If you have any additional questions, go ahead and click on the box below that says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

0

Y33KV
(click to enlarge)

Jerred H.

1/27/2026

Hey Randy, how did the Replacement Top Channel Crossbar Infill work with your Yakima HD Crossbars? Your update could make it easier for the next person needing new infill covers.

Answer 1

Yes. You can cut the Yakima 60" Tracks for Roof Racks #Y01135 down to the size you need them and still use the end caps. You'll need to either cut them down to a size that still leaves the pre-drilled holes close enough to connect the end…

view full answer...

Answer 2

Rhino Rack has aero bar roof racks that fit directly to the Lance camper shell roof tracks you have now with the part #Y02-480B-NT for a 54 inch long crossbar or part #Y02-490B-NT for 59 inch bars. This would be an easy and great option to add a roof…

view full answer...

Answer 3

Thanks for reaching out, Adam. We do have a roof rack option that can be used on your 2020 Palomino SS550. There are no custom-fit options though, so drilling into the roof will be required. I recommend the SportRack Pop-Up Camper Roof Rack #SR1020.…

view full answer...

Answer 4

Depending on the crossbars that are used (round, square, aero, or HD) you may or may not be able to place the endcap back in place. The endcap that comes with the Yakima HD bars is a bit longer and wider than most other endcaps so you won't be…

view full answer...

Answer 5

The Yakima HD Crossbars #Y01156 will work with the Thule Hullavator #TH898. Based on the pictures you sent in it looks like you have the crossbars installed upside down. The end caps have an opening on the other side that lets you easily slide in…

view full answer...

Answer 6

The Replacement Top Channel Crossbar Infill for Yakima HD Style Crossbars #Y33KV is the Yakima 8881036 and the correct insert for your Yakima HD Crossbars #Y01158. The Replacement Top Infill #Y01166 is the Yakima part number 8001166 which fits both…

view full answer...

Answer 7

Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions and profile so they are interchangeable.

view full answer...

Answer 8

If you are looking for crossbars that can accommodate the 12mm T-slots, the closest confirmed top channels we have are Yakima crossbars like the Yakima HD Crossbars - Aluminum - Black - 68" #Y01158 or Rhino-Rack crossbars like the Rhino-Rack…

view full answer...

Answer 9

Hey Randy, welcome back. The Replacement EndCap for Yakima HD Crossbars item #YA54FR is the only option available. They don't make other short endcaps for the Yakima HD Crossbars like item #Y01158. What do you use your roof rack for? You can add…

view full answer...

Answer 10

Hey Bo, it is not normal for the Yakima 60 inch HD crossbars like the part #Y01156 to have a downward bow in the middle of them. They should be basically totally flat. I attached a picture of what they should look like for you to check out.

view full answer...

Answer 11

Yes. The Thule Hullavator Pro #TH898 will fit on Yakima HD Crossbars like the #Y01157 mounted either in the channels or using the clamp on mounts. Since the Hullavator Pro does not come with locks included you may want to consider adding those with…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Top Channel Crossbar Infill for Yakima HD Crossbars

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching