Will Yakima Baseline Towers Work with Thule ProBar Evo Crossbars

Question

Question:

Hello! Yakima Baseline is the system that fits my car, but I have a discount with Thule. I am wondering if anyone knows whether or not I can somehow attach Thule ProBar Evos to the Yakima Baseline towers?

asked by: Nick

0

Expert Reply:

I do have an option for you but the Thule ProBar Evo Crossbars like part # TH713600 are not compatible with the Yakima Baseline Towers. In order to use the Thule ProBar Evo Crossbars you'll need the Evo Clamp Feet for Thule Crossbars part # TH710501 and subsequent vehicle specific fit kit. The other option would be to simply use the Yakima HD Crossbars like part # Y01158. I have attached a full list of sizes below for this crossbar. The channel dimensions which the crossbars mount to are different between Thule and Yakima which is why you can't swap back and forth.

expert reply by: Conner L

0

Answer 1

It sounds like you have a 2019 Hyundai Santa Fe with flush side rails. If that is the case then you will have to install both Thule Crossbars and Thule Mounting Feet as Thule Crossbars cannot be used with Yakima Mounting Feet and the Yakima Mounting…

view full answer...

Answer 2

The Replacement Adapter and Seat #8880637 is designed for Yakima JetStream bars but we do have a review showing them being used with Thule WingBars so it does look like they will physically fit together. With that being said, I recommend sticking…

view full answer...

Answer 3

Rhino Rack crossbars are only compatible with a Rhino Rack Foot Pack. The same goes for Thule crossbars as well. Even though your Rhino Rack crossbars are not compatible with a Thule foot pack, I still have a solution for your roof rack needs. We…

view full answer...

Answer 4

Hi Michael; you can use the same fit kit #THKIT3101 and mounting feet #TH460R. However, the longest WingBar Evo is 60" #TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the #TH713700 which…

view full answer...

Answer 5

For your Thule Podium Foot Pack #TH460R and WingBar Crossbars #TH711420, you simply need the Thule Fit Kit for Podium Style Foot Pack #THKIT3101 if I understand your question correctly. If you are not fitting the rack to tracks like #THTB60, then let…

view full answer...

Answer 6

The good news is that the roof rack manufacturers all decided to use the same channel dimensions so the roof rack accessories for roof channels basically all are interchangeable between (most) brands. Thule and Rhino Rack do work together just fine.…

view full answer...

Answer 7

Yes, the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 #TH460R will allow you to attach aero-style Thule crossbars on top of your Leer topper with Thule tracks. The Rapid Podium Feet will fit right into the tracks. If you need a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...