See what our Experts say about this Yakima Roof Rack

• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Can Thule WingBar Evo Crossbar Fit On Yakima SkyLine Towers
  The Replacement Adapter and Seat # 8880637 is designed for Yakima JetStream bars but we do have a review showing them being used with Thule WingBars so it does look like they will physically fit together. With that being said, I recommend sticking with Yakima products just because if you do happen to experience any faults with the system (which there shouldn't be any) it would be a lot easier to work with Yakima or Thule if you can show that you're using the product as intended and you...
  view full answer...
  
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee Laredo
  I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Kuat Switch 4 Ski and Snowboard Carrier # KU94FR. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure. Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
  view full answer...
• Will Yakima Roof Rack and Yakima SkyBox 21 Fit a 2018 Mercedes-Benz GLC300 with Flush Rails
  I'm not sure what Thule products you already have but there are roof rack options from Thule, as well as Yakima, that are compatible with your 2018 Mercedes-Benz GLC300 with the flush mounted rails. The Thule roof rack option includes the 47" WingBar Evo Bars # TH711220 Black or # TH711200 Silver, the Foot Pack # TH710601, and the Fit Kit # TH186020. The Yakima roof rack options include the 50" JetStream Bars # Y00425 Black, along with the RidgeLine Towers # Y00145 and Fit Kit # Y06022. When...
  view full answer...
  
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Highest Capacity Roof Rack for a 2018 Subaru Outback Touring
  The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails). All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• What Comes with the Annex for 2 Person Yakima SkyRise Tents # Y07421
  The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red). The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs...
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Recommended Roof Rack For A 2018 Chevy Equinox Hauling A Kayak And Bike
  Hey William, If your 2018 Chevy Equinox has rails that run from front to back then I recommend the Yakima JetStream Crossbars # Y00425 and TimberLine Towers # Y33TR. If you have a naked roof then you'll need the following roof rack components: Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK488 To haul the kayak you can can clamp on a carrier like the Rhino-Rack...
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Is there a Roof Rack Available for a 2021 Hyundai Tucson with a Panoramic Sunroof
  You are correct in that roof racks for the 2021 Hyundai Tucson are not compatible with the panoramic sunroof. However, there still may be options available to you for your accessories. For example, if you are looking to transport some bikes, you can use a trunk-mounted carrier like the Yakima FullBack 3 Bike Rack, part # Y02633. I've linked to a video review of it below. Or, if you wanted a cargo carrier, you could combine a hitch and a hitch-mounted cargo carrier. For the hitch, you...
  view full answer...
• 2025 Mini Countryman Roof Rack Recommendation for Flush Rails
  Hey Anderson, thanks for reaching out! I have a fit from Yakima that works for the flush rails on your 2025 Mini Countryman, and it includes these parts: - 50" Yakima JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y24AR - Lock Core Kit # Y07204 (optional) I've attached a photo that Yakima took when they tested this fit. What are you planning on using the roof rack for?
  view full answer...
• Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda Civic
  To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
  view full answer...
• Yakima Roof Rack Parts for 2018 Subaru WRX
  Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
  view full answer...
• Roof Rack For A 2023 Toyota 4Runner And A Yakima SkyBox
  We can definitely help set you up with a Yakima SkyBox NX 16 # Y95AV for the top of your 2023 Toyota 4Runner with the factory raised rails. All you will need to do is install a roof rack with crossbars. Since you are doing a Yakima brand roof box, it is best to go with a Yakima brand roof rack as well, since everything will be directly compatible. The Yakima JetStream crossbars will be a great fit for your vehicle. The complete roof rack consists of the following parts: Yakima JetStream...
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• What is the Best Roof Rack Option for a 2002 Mercury Grand Marquis?
  Yes, the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B is the best option (and currently, the only option) for you. The Monkey Bars has one of the easiest installations of any roof racks we carry. In addition, the Monkey Bars have a total weight capacity of 150 pounds to give you plenty of capacity to transport cargo and accessories on your 2002 Mercury Grand Marquis. To carry your accessories, you might not be able to transport your kayaks, bikes,...
  view full answer...
• Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
  To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
  view full answer...
• Looking For Roof Rack System For High Roof Camper Shell
  Hello Bryant, thanks for reaching out. We do offer a roof rack system that will work for your high roof shell. It will involve mounting a pair of tracks on the roof, then the roof rack towers install onto the tracks. Here is what I recommend: - Yakima 42" Tracks for Roof Racks # Y01126 - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Yakima JetStream...
  view full answer...
• Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks
  Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
  view full answer...
• Ladder Rack for a Leer Camper Shell on a 2007 Toyota Tundra
  We do have a camper shell ladder rack you can use with your Leer camper shell on your 2007 Toyota Tundra. take a look at the Thule TracRac CapRac # TH29200XT. This rack includes everything so it is ready to install. The load stops are also included. The bars are 65 inches long and the capacity is limited to the capacity of your Leer camper shell. If you would rather have a rack that is adjustable front to back then you can use Rhino-Rack roof rack # Y01-120-NTB with 54 inch long bars but...
  view full answer...
  
• What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
  view full answer...
• Can the Yakima Tracks for Roof Racks Be Trimmed
  I can't see why you wouldn't be able to cut the Yakima 54" Tracks for Roof Racks # Y26RR if need be. As long as you're able to cut it cleanly to where the end cap would fit back in place as it was before, you'll be good to go. We also have shorter tracks, # Y01126, which are 42" long which might be better suited for you.
  view full answer...
• Will Thule UpRide Bike Rack Fit T-Slot of Rhino-Rack Vortex Crossbars for Track Mount System
  Yes, the Thule UpRide # TH599000 will fit the T-Slot channels of the Rhino-Rack Vortex crossbars. The Rhino-Rack tracks don't have extra end caps available but I do have another solution for you. I confirmed this with my contact at Rhino-Rack. The Yakima tracks, similar to the Rhino-Rack tracks, do have replacement end caps that will allow you to easily do what you are wanting to do. The Yakima tracks come in 3 different lengths; 42" # Y01126, 54" # Y01127, and 60" # Y01135. You will just...
  view full answer...
  
• Replacement Hardware for Yakima 60" Roof Rack Tracks
  The Replacement PlusNut Hardware for Yakima Roof Rack Tracks # Y8810102 works only to replace the original PlusNut and washer on Yakima 42" # Y01126 or 54" # Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit # Y8880039. For your Yakima 60" Roof Rack Tracks # Y01135 you need replacement kit # Y8810155 since we don't sell individual parts for this kit separately. This kit includes 12 capnuts, 12 bolts, 9 black nylon washers and 13 white nylon washers.
  view full answer...
• Can Yakima Tracks Work on Truck Cap and Roof
  You can add the Yakima Tracks for Roof Racks, which come in 60" # Y01135, 54" # Y01127 or 42" # Y01126 to your 2015 Ford F-150 although I could not tell from the photo if there was a space between the truck cap and the roof of your truck. If there is a space between them you wouldn't want to install just the two tracks per side as that wouldn't be fully secure. As for the rivets showing, they won't specifically, but the CapNuts in the hardware would show because you need to drill through...
  view full answer...
  
• What are the Replacement PlusNuts for the Yakima Roof Rack Tracks Made From
  The Yakima PlusNuts replacement part # Y8880039 is the optional hardware kit for Yakima roof rack tracks # Y01126 (42 inch) and # Y01127(54 inch) and are made out of steel. The roof-rack tracks are an anodized aluminum so you wouldn't have any issues using other types of metals.
  view full answer...
• Do Yakima Tracks Need Yakima Feet & Crossbars
  Yes, you will need to stick with Yakima when installing the Yakima 42" Tracks for Roof Racks # Y01126. You will also need the TrackTowers for Yakima Crossbars and Platforms # Y52AV.
  view full answer...
• Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof
  The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
  view full answer...
• Determining Weight Capacity of Yakima Track Roof Rack for Naked Roof
  The weight capacity of the Yakima 42" Tracks for Roof Racks # Y01126 will be the capacity of the bars used in them which will be 165 lbs most of the time. Now the roof capacity is also a figure you need to stay under as well. They don't have a specific capacity for a sheet metal roof install so you'd have to stay under the capacity of the vehicle roof as stated in the owners manual. When installed properly though you would not have to worry about the tracks popping out. We sell these tracks...
  view full answer...
• Are There Landing Pads Available To Mount Yakima Q-Towers To An A.R.E. Truck Topper
  I reached out to Yakima and was informed that there unfortunately is not a compatible landing pad for Q-Towers available so the only way to mount your Yakima crossbars would be to also get new towers. You would also need some tracks to mount on the roof of your A.R.E. Truck Topper to have something for the towers to mount to. We have the following track sizes available: 42" # Y01126 54" # Y01127 60" # Y01135 Since you have Q-Towers I'm assuming you have round bars and would need four...
  view full answer...
• Can Yakima Tracks for Roof Racks be Slightly Bent During Install on Tear Camper
  I reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks # Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the Landing Pad 1 # Y00221, along with four of the Yakima Control Tower # Y8890027 and round bars like the 58 inch # Y00409, 66 inch # Y00410, or 78 inch # Y00411, depending on the size of your camper's roof.
  view full answer...
• What Part Of Roof To Install Yakima 42" Tracks for Roof Racks On 2001 Ford F-350
  I was able to find the video you are referring to of an installation of part # Y01127 on the 2004 Ford F-250, our installer does attach the tracks closer to the door because that is the strongest part of the roof. I have attached that video. I contacted Yakima and they said the tracks can be installed anywhere on the roof of 2001 Ford F-350 that works best for you but we like to install them closer to the door for stability.
  view full answer...
• Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell
  To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
  Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak Carrier
  There are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Distance Between T-Slots on RetraxPRO XR For 2024 Chevrolet Colorado
  Hey Aaron! The 55" bars won't be long enough since the # RTX24TR T-slots are 56-3/4" apart. There is a higher cost but I do prefer the quality of the Yakima crossbars/setup over Rhino-Rack so I would grab the 60" Yakima JetStream Crossbars # Y00426. You will also need the SkyLine Towers # Y53TR and Landing Pads # Y00221.
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
  To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
  view full answer...
• What Are The Roof Racks That Come With The Nucamp Boondock Tab 320s Travel Trailer Called?
  I reached out to my contacts at Yakima and they advised that the roof racks that come with the 2018 Nucamp Boondock tab 320s travel trailer are Round Cross Bars for Yakima Roof Rack System # Y00409. The Nucamp Boondock trailer model has 58" bars, but they are also available in 48", 66", 78" and 86" long. To attach the Round cross bars you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers Qty 4 # Y03536. You will also need the Landing Pad 1...
  view full answer...
• Recommended Roof Rack System for A.R.E. Camper Shell with Tracks
  The items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Distance Between T-Slots on RetraxPRO XR For 2024 Chevrolet Colorado
  Hey Aaron! The 55" bars won't be long enough since the # RTX24TR T-slots are 56-3/4" apart. There is a higher cost but I do prefer the quality of the Yakima crossbars/setup over Rhino-Rack so I would grab the 60" Yakima JetStream Crossbars # Y00426. You will also need the SkyLine Towers # Y53TR and Landing Pads # Y00221.
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
  To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
  view full answer...
• What Are The Roof Racks That Come With The Nucamp Boondock Tab 320s Travel Trailer Called?
  I reached out to my contacts at Yakima and they advised that the roof racks that come with the 2018 Nucamp Boondock tab 320s travel trailer are Round Cross Bars for Yakima Roof Rack System # Y00409. The Nucamp Boondock trailer model has 58" bars, but they are also available in 48", 66", 78" and 86" long. To attach the Round cross bars you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers Qty 4 # Y03536. You will also need the Landing Pad 1...
  view full answer...
• Recommended Roof Rack System for A.R.E. Camper Shell with Tracks
  The items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
  view full answer...
• Can Yakima JetStream Crossbars Be Installed On a 2024 Hyundai Palisade With Flush Rails
  Hi Patrick, Yakima's JetStream crossbars can be installed on your 2024 Hyundai Palisade but you'll need the following components in order to do so: RidgeLine Towers for Yakima Crossbars - Qty 4 # Y00145 RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers # Y89FR Yakima recommends their 50" JetStream crossbars # Y00425 (black) & # Y00428 (silver) for your vehicle. Yakima's crossbars do have a mounting channel running the full length of the bar so you could go larger if you want,...
  view full answer...

Do you have a question about this Roof Rack?