Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof

Question

Question:

Item # Y8880039- I would like to install the plusnut on my pickup canopy, which is fiberglass. What are your thoughts on that?

asked by: Brian

0

Expert Reply:

The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof.

To have a complete roof rack you would also need to pick up the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 which will come in a quantity of 2 so you would need to purchase 2 if you are wanting 2 crossbars. The landing pad would then work with the SkyLine Towers for Yakima Crossbars # Y72TR for 2 feet (1 crossbar) or # Y53TR for 4 feet (2 crossbars). This would allow you to use Yakima CoreBar or JetStream crossbars like the Yakima CoreBar Crossbars # Y00421 (50") or the Yakima JetStream Crossbars # Y00427 (70").The size of crossbar you can use will be determined by the vehicle you are using them on. You can measure the width of the vehicle where the tracks will be installed to determine how wide of crossbars you can get. I have linked our selection of Yakima Crossbars so that you can take a look after you get measurements. Adding the Yakima Same Key System (SKS) Lock Cores # Y07204 will allow you to secure the roof rack to your vehicle.

expert reply by: Scott S

0

Answer 1

We do have the part #Y8810155 and it is in stock. I also attached pictures of the install instructions for the tracks part #Y01135 as well.

view full answer...

Answer 2

The screws that come with the Yakima Y8810155 are #10-32x1” and the capnuts are 1/2 x 1-1/4”.

view full answer...

Answer 3

Yes, the capnuts for the 60" tracks #Y01135 and 54" tracks #Y26RR are the same so part #Y8810155 would be the correct fit for your 54" tracks.

view full answer...

Answer 4

The Replacement PlusNut Hardware for Yakima Roof Rack Tracks #Y8810102 works only to replace the original PlusNut and washer on Yakima 42" #Y01126 or 54" #Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit #Y8880039.…

view full answer...

Answer 5

You can use the Yakima 54" Tracks for Roof Racks #Y01127 without adding anything underneath. As far as protection, there is a plastic piece that will go in between the rail and the roof, so you don't have to worry about it damaging your…

view full answer...

Answer 6

I recommend Yakima HardTop SL Roof Rack part #Y01618 that includes the track, feet and cross bars for your camper shell. This roof rack is the highest capacity available for a camper shell at 220 lbs, so as long as you do not exceed that you…

view full answer...

Answer 7

The correct 54" Yakima Tracks for a Camper Shell is part #Y26RR which will allow you to use any standard track mounted roof rack. The other options you listed, part #Y01127 and part #Y64MR are for metal roofs and ladder racks respectively. Since…

view full answer...

Answer 8

The Replacement Capnuts, Washers and Bolts for Yakima 60" Tracks part #Y8810155 comes with #10 machine screws and cap nuts.

view full answer...

Answer 9

The Replacement PlusNut Hardware Kit, part #Y8880039 you asked about are 10-32 mm with a thread pitch of .75 inch according to our contact at Yakima.

view full answer...

Answer 10

If the instructions for the Yakima 60" Tracks for Roof Racks #Y01135 state to use the mounting bolts on every other hole then the 12 mounting bolts included in part #Y8810155 is enough for 2 tracks. Although you can cut them to size, if you use…

view full answer...

Answer 11

Yes, the Replacement PlusNut Hardware Kit #Y8880039 that you referenced is an optional hardware kit for your Yakima 60" Tracks for Roof Racks #Y01135. This hardware kit is designed for use with sheet metal roof applications.

view full answer...

Answer 12

There isn't a pdf of a track fit sheet but basically it wants you to select the tracks that won't be too long to fit your camper shell. It also tells you to be sure to place the tracks equal distance from the rear of the camper shell and from…

view full answer...

Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching