Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs
(118 reviews)
Price: $588.05
In Stock
Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs
Our Price: $588.05
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
10% prefer this
8% prefer this
- All Info
- Reviews (118)
- Q & A (0)
- Photos
Ultra-Fab Products Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 26 Inch Lift
- Ultra-Fab Products
- Bolt-On
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack lets you lift and lower your A-frame trailer quickly and easily
- Efficient ball screw makes it fast and easy to position your trailer
- Ball bearings roll along sturdy, threaded steel rod
- Powered drive provides quiet operation and eliminates the need for hand cranking
- Easy-to-access on/off and retract/extend buttons make for simple operation
- Buttons on front panel will not break off like standard toggle switches
- Wireless capability - operate jack with included remote control key fob
- Hitch memory function stores hitch height and weight distribution system height to make hooking up simple
- Automatically returns your trailer to the position at which you unhooked
- LED courtesy light on front of jack allows for simple nighttime setup
- Durable powder coat finish resists corrosion
- Emergency override allows manual operation in case of power failure
- Included adapter allows you to easily use your drill to raise and lower the jack
- Manual crank handle not included
- Bolt-on installation
Specs:
- Bracket height:
- Retracted: 10-1/2"
- Total lift: 26"
- Screw travel: 21"
- Drop leg travel: 5"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 18.4 seconds
- Retracts 6" in 18.7 seconds
- Lift capacity: 5,500 lbs
- Outer tube diameter: 2-1/4"
- Footplate diameter: 7"
- Motor attributes:
- 12 Volt
- 2-Year warranty
- 10-Year warranty when registered within 90 days
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
38-944055 Ultra-Fab Phoenix Power Trailer Tongue Jack - A-Frame - 21" Travel - 5,500 lbs
Item # UF38-944055
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Defective
- Arrived Damaged
- Wrong item was ordered
Customer Reviews
Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs - UF38-944055
Average Customer Rating: 4.5 out of 5 stars (118 Customer Reviews)
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.by: Nikki01/21/2023
This is awesome and so easy to install. Took longer to open the box then to set it up. We had ordered something similar to this for our old camper. It took us hours to get it to fit right. This was extremely easy to install. My husband loves the memory feature on this thing.
by: Phillip 08/26/2022
Best addition to my trailer, wish I got it sooner!
by: Tightlines08/02/2023
My order arrived damaged. etrailer was immediate to remedy. The same day a return for pickup at my home and a new item was shipped out. I plan on installing the jack tomorrow.
by: Mathew03/08/2023
A great investment for my trailer as I have a lifted truck and a weight distribution hitch that was not able to function properly with the standard manual cranking jack to detach from the truck. It used to be such a chore to unhook and now its as easy as a touch of a button. I would give this jack 5 stars but the remote doesn't work sometimes and it's hard to use the remote. The extra light on the jack is great for late night arrivals when you need to see what your doing behind your truck.
by: Dave08/16/2022
I used this electric jack to replace a failed the original electric jack that I had. I am using this on a 24' enclosed trailer that at times gets loaded heavy and this jack has had no issues raising the trailer to put it on the truck. The remote is just an bonus feature that I didn't think that I really needed. now I use it all of the time.
by: Stephen 01/21/2022
The jack outperforms the old jack by far!! I have it wired directly to the battery and has performed great. It goes up and down quickly. It also has enough torque to raise the trailer and truck to easily install my equalizer hitch arms with ease. I haven't tried the remote to level yet though. Overall very pleased with the purchase and would highly recommend to anyone who is searching for a heavy duty electric jack.
by: Tim05/12/2020
The first jack we received failed in the control circuit after the first use. Ultra-Fab was very good about sending a replacement jack after some brief troubleshooting. The second jack has performed well for the past year. It hasn't struggled at all to lift our trailer and the remote is a very convenient feature... although the remote control occasionally struggles with keeping a good signal and requires pushing the buttons repeatedly.
by: David 01/01/2023
quick response when I order my trailer jack
by: Richard 09/13/2019
I purchased this product to replace one that has given me good service for several years but which I felt I was working it to close to its limits. My selection of this electric tongue jack was for it's 5500 Lb rated load capability but I do like both the remote control unit (that comes with it) as well as the Jack's face plate controls that also have a memory function for both up and down positions. I was surprised how well the unit worked with the factory memory calibration settings for my application which made the installation go much faster. While I had to run an extra 10 guage ground wire back to the battery, I like that they do this to make sure there is no possible chance of the jack motor not being properly grounded. The only reason I did not give it all 5 stars is because I reserve the highest rating until I am able to see from experience that it is warranted.
by: Jeff 06/03/2023
Still working great!
by: DP02/03/2022
Jack arrived damaged. Plastic cover was smashed in and circuit board was also damaged. Extremely poor packaging for such a heavy bulky item. I gave it an additional star because the phone representative was helpful and said a new one would be sent out. All this could have been avoided with proper packing.
Jenny N.
2/19/2022
We recently sent you a new jacks with cover and were wondering if you had any feedback about the product for other shoppers? I look forward to hearing from you.
by: Efs02/26/2020
The product we received is great but the customer service we received from etrailer.com was the best! Our original order was damaged in transit and we contacted etrailer. They immediately shipped us a new unit and supplied us with a shipping label to send the damaged unit back. They couldn't have made it any easier. Very pleased!
by: John08/09/2019
We got the jack installed on the trailer. So far I am happy with it. Easy to program the position memory buttons and no issues doing so. My only concern is if we have a power failure, cranking the jack by hand is next to impossible. Time will tell, with the warranty, I'm not concerned. If it fails, I will let you know!
by: Ronald 01/27/2023
Fast shipping Haven't installed yet but will when the weather improves
by: Tim09/08/2022
Jack broke 6 mobthes after I installed it.
Brooke M.
9/24/2022
These jacks come with a two year warranty and a ten year warranty if registered in the first ninety days. I will have our customer service reach out to you regarding your options for a warranty claim.
by: Sue08/28/2022
Installed the first one. Didn’t work. Manufacturer sent a new one. Worked with remote only. Manufacturer sent a third one. We sent them all back. Sad piece of equipment
by: Adam03/31/2022
I really like this jack - it's the Cadillac of jacks. It zips up and down quickly, and it's great that you can double tap the up or down button and it will go all the way up or all the way down. I like the memory functions as well - very helpful.
Caveat, I've only used it for a few days. I hope it holds up!
by: Richard 11/17/2020
Met all my specifications . Price was very competitive.
Delivered on time.
Installation was simple.
It works better than described.
by: Garry P07/09/2020
should have bought it when I bought my trailer
by: Joseph01/30/2019
this is working great, the remote is a very handy addition
Joseph M.
1/31/2020
This thing is a beast!!! still going strong . I have had zero problems , well it does pick the whole rear end of the truck up with it if Im not looking, lol
by: Martin03/01/2022
It stopped working, now I just use a ratchet to operate it
Jenny N.
3/11/2022
I would like to ask you a few questions to see if I can trouble shoot with the jack. How long did you have the jack before it stopped working electronically? Have you checked the power and ground wiring? Does it work with the remote? What is the weight of the trailer? And what is the weight of the tongue weight of the trailer? The jack does have a 10 year warranty. I would like to reach out to the manufacturer for you and these are the questions that they will ask.
by: Shannon 03/30/2021
Shannon
3/31/2022
I had to send the first one retailer sent me back because they sent me one that was defective. It takes time to return stuff. Waiting was a problem. When I got the second one it worked well and still does but the cheezy LED light burt out within 30 days. I sure as hell was going to take more time out of my life to deal with it so I live with a broken light. It seems to me that when you pay [XX] dollars you should receive a quality product, not crap. 4 stars is too high of a rating.
by: James04/24/2020
it makes a grinding /clunking noise without any weight on it
by: Mark05/15/2019
GOT THE RIGHT PART, AND SHIPPING OVER NIGHT WASN'T NEAR AS BAD AS I THOUGHT IT WOULD BE.
GREAT CUSTOMER SERVICE.
by: Jeremy 07/23/2023
25
118
Show More Reviews
See what our Experts say about this Ultra-Fab Products Camper Jacks
- Recommended A-Frame Electric Jack for 2022 Forest River No Boundaries 19.6 Travel TrailerFor a jack with a higher capacity for your 2022 Forest River No Boundaries 19.6 Travel Trailer I recommend the Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs # UF38-944055. This has the capacity you're looking for at 5,500 lbs and has a total lift of 26". This jack also extends and retracts 6" in approximately 18 seconds with 1,000 lbs of tongue weight. If you have any issues with the jack down the road Ultra-Fab Products will get you taken care of. You can...
view full answer... - What is Electric Fastest A-Frame Trailer JackThe fastest powered a-frame jack we offer is the Phoenix Jack part # UF38-944055 that you referenced which can travel 10 inches in just 47 seconds. Depending on where you would mount the battery would determine if you'd need a battery box.
view full answer... - Warranty of Phoenix Electric Trailer Jack With RemoteThe Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs # UF38-944055 has a 2-year warranty. I have added a link to a video review of this jack for you to take a look at.
view full answer... - Fast Lifting Powered A-Frame Trailer JackThat's a really clever idea for a jack for your v-nose trailer. You could use the Phoenix Electric Jack part # UF38-944055 which has a remote that you can use to raise and lower it from the outside of the trailer. This is also one of the fastest moving powered jacks out there as well.
view full answer... - Do Electronic Trailer Jacks Come With A Manual Crank Override Incase The Motor Fails Yes, most jacks, like the Phoenix Electric Trailer Jack with Remote # UF38-944055 you were looking at, have a manual override on the top of the jack head. You'll simply need to remove the small cap and insert the corresponding socket to manually extend or retract your trailer jack.
view full answer...
- Phoenix Electric Trailer Jack Compatibility With A Big Toe BE-5 12K Bobcat TrailerThank you for the pictures. Since you have an A-Frame you will be able to use the Phoenix Electric Trailer Jack with Remote # UF38-944055. If you don't have a battery or plan on installing one then you'll want to wire the jack to the 12 volt accessory wire on your 7-way cable to power the jack whenever you're hooked up to the truck.
view full answer...
- Electric A-Frame Trailer Jack with the Most Lift for a 7.5K Trailer and 2013 Ford F-250Basically, the higher the capacity of the jack used the easier it will be for the jack to operate and the longer it will last. The highest capacity A-frame jack that we have is # UF38-944055. It's rated up to 5,500 pounds and also has the highest lift of any of our jacks at 26 inches. A trailer that weighs 7,500 pounds would have a tongue weight around 750 to 1,125 pounds (10 to 15 percent of the gross trailer weight) so a jack rated for 4,000 or 4,500 pounds could handle it with ease.
view full answer... - Replacement Powered Jack Recommendation for Race Car TrailerI really like the Ultra Fab Phoenix jack part # UF38-944055 that you referenced. This would be a really great option to replace your manual jack. It has more than enough capacity as it can lift up to 5,500 lbs and also is one of the fastest moving jacks out there as it can raise and lower in just a matter of seconds. Other electric jacks take quite a bit of time to raise and lower.
view full answer... - Heavy Duty Powered Jack Recommendation for 2002 Carson Toy HaulerThe Phoenix Electric Trailer Jack part # UF38-944055 would be an excellent option for your toy hauler as it has the highest capacity at 5,500 lbs and is also the fastest moving jack out there as it can move 6 inches in 18.4 seconds! I attached an install and review video for this for you to check out as well.
view full answer... - Electric Trailer Jack With Dead Battery on TrailerNo, your Phoenix Electric Trailer Jack with Remote # UF38-944055 is not able to operate while connected to your truck if the trailer battery is dead, since drawing power from the truck battery via the 7 way connector will most likely overload the jack and blow a fuse. The electric jack should only rely on the trailer battery to be operated. In order to operate your electric trailer jack, you'll need to connect the trailer to the vehicle or connect the battery to an external charging source...
view full answer... - Troubleshooting A Phoenix A-Frame Trailer Jack That Does Not Operate AnymoreThere is still some troubleshooting you can do, however if the troubleshooting does not solve the issue you're going to either have to reach out to Phoenix for a replacement jack or pick out your own. With that being said, the first thing you can check is your ground connection. Often times this is over looked because it feels too simple to check or people just forget but you'd be surprised how often a bad ground ends up being the culprit. If your ground looks good, then I'd move onto...
view full answer... - Height Above Trailer Frame Phoenix Electric Trailer JackFrom the bottom of the mounting surface of the Phoenix Trailer Jack part # UF38-944055 to the very top of the jack measures 27 inches.
view full answer...
- Are Remote Controls Paired to Individual Phoenix Electric Trailer JackThey are, yes; the reason why is you have to individually pair the remote with the Phoenix Electric Trailer Jack # UF38-944055 before it operates. So you would pair each remote to its own jack if you wanted to use multiple of the Phoenix Electric Trailer Jack # UF38-944055.
view full answer... - Determining The Correct Electric Tongue Jack For A Big Toe BE-5 12K Bobcat Trailer Tongue weight is going to typically be 10-15% of the trailer's GWVR, so at 12,000lbs you'd be looking at roughly 1,200-1,800lbs maximum tongue weight (when properly loaded). If the trailer is an A-Frame bumper pull then the Phoenix Electric Trailer Jack # UF38-944055 you were looking at would be a compatible fit. It has a 5,500lb capacity and is one of the fastest jacks currently on the market. If it's not an A-Frame send me some pictures and I'd be happy to take a look and figure out what...
view full answer... - Troubleshooting the 5,500 lbs. Ultra-Fab Phoenix Electric Tongue Jack That Won't RetractIf you can use the emergency override that allows for manual operation of your Ultra-Fab Phoenix Electric Trailer Jack, # UF38-944055, then that minimizes the mechanical failure possibilities and isolates the issue to electrical components. I suggest you ensure there is a full charge on your battery as low voltage will have an effect on operation. If you have a full charge I suggest you focus on the electrical connections and the switch. If you cannot retract using the manual operation,...
view full answer... - High Quality A-Frame Electric Jack for Car Hauler TrailerFor an electric A-frame jack I really like the Phoenix Electric Jack part # UF38-944055. This is an extremely well made jack with a great warranty that is also very fast. This jack can extend and retract 6 inches in 18 seconds with a tongue weight of 1,000 lbs on it. Most jacks take a very long time but this one is very fast and very high quality.
view full answer... - Phoenix Electric Trailer Jack Memory Storage and Calibration Hole For UF38-944055The Phoenix Electric Trailer Jack with Remote # UF38-944055 will retain its memory when the battery on your travel trailer is disconnected in storage. I have added an image of the calibration hole that is to line up with edge of the outer tube when you have to recalibrate the jack after having to move it manually.
view full answer...
- Amp Draw Of The Ultra-Fab Phoenix Electric Trailer Jack The Phoenix Electric Trailer Jack with Remote # UF38-944055 can pull 5 amps with no load or 12-15 amps with a load. This jack does come with a 240v 30 amp slow blow fuse and fuse holder so that you'll be ready to go when you get it.
view full answer...
- Recommended Electric Trailer Jack to Hook up a Trailer to a Lifted TruckThe Phoenix Electric Trailer Jack with Remote # UF38-944055 will have plenty of lifting capacity for your 6,050 lb. trailer and has the most amount of lift at 26". Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. So this jack will be able to lift your trailer and provide you with a significant amount of lift to help with hooking up to your lifted truck.
view full answer... - Trailer Jack Just Clicks and Will Not Raise TrailerThe first thing I recommend checking on the jack is the power source. If the battery that runs the jack is low on power then it will be hard for the jack to lift the trailer (lowering it tends not to be a problem because gravity is helping) and it may just refuse to do anything. If the voltage on the battery is good and the wiring is all intact then it is possible that the jack had been over extended at some point and the screw and/or nit inside is damaged. This would mean that a replacement...
view full answer... - Mounting Bolt Pattern For Ultra-Fab Phoenix Electric Trailer Jack with Remote # UF38-944055The Phoenix Electric Trailer Jack with Remote # UF38-944055 has a multiple mount hole pattern. This pattern allows you to position the jack so the motor faces the front of the A-Frame, or it can be rotated so that the motor faces the drivers side of the camper. I have included an image of the mounting pattern so that you will be able to confirm fitment on your 2014 Arctic Fox 25R travel trailer. It is designed to fit standard A-Frame jack holes that accept 2-1/4" tongue jacks.
view full answer...
- Troubleshooting Ultra-Fab Phoenix Electric Tongue Jack That Won't Extend or RetractThe Ultra-Fab Phoenix Electric Trailer Jack with Remote- 5,500 lbs # UF38-944055 or 4,000 lb # UF38-944040 without remote sounds like it may have a mechanical issue. I recommend using the manual crank to extend or lower the jack. If you can use this, then you isolate the issue to electrical with a possible bad ground or motor issue. If you can't physically move the jack with the manual crank then we know the issue is mechanical with the inner rod seized or having stripped threads. If...
view full answer... - Is Replacement Bolt for Head of Husky Brute Jack AvailableI reached out to my contact at Husky and she said that those bolts aren't available as replacement parts so if you are outside of the 1-year warranty then the only option is to replace the jack. I recommend the Phoenix Electric Trailer Jack # UF38-944040 which has a slightly lower rating at 4,000 lbs but it boasts an impressive travel speed of 10" in 18 seconds. The upgraded version of the Phoenix is part # UF38-944055 which has a higher weight capacity at 5,500 lbs and comes with a remote...
view full answer... - How Does the 5K Husky Super Brute Electric Trailer Jack Get PowerThe Ultra-Fab Phoenix trailer jack # UF38-944055 does get powered by a trailer-mounted 12 volt battery. It has a power wire that will attach to the positive battery terminal or to the 12 volt circuit at a junction box (if the trailer is equipped with one). The other wire is then attached to the negative side of the battery. Another option is Ultra-Fab jack # UF38-944037 which plugs into a 7-Way trailer connector to get its power from the 12 volt circuit. This jack is rated for 3,500 pounds...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Conner L
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Eric H
Updated by:
Manda E
Video by:
Zach D
Video by:
Thomas T
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Phillip
8/27/2023
I love this jack. I truly wish i had bought it sooner. Its made my trailer changes so much faster and it diesnt break my back cranking the jack the old way. I can even hook up in the rain without getting out of my truck! Only ussue i have is the double tap option going up stopped working so i just have to hold it the whole time.