Warranty of Phoenix Electric Trailer Jack With Remote

Question

Question:

What is the warranty on your 5500 lbs electric trailer jack? Thank you,

asked by: Kirby

0

Expert Reply:

The Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs # UF38-944055 has a 2-year warranty.

I have added a link to a video review of this jack for you to take a look at.

expert reply by: Kyle S

0

Answer 1

There is still some troubleshooting you can do, however if the troubleshooting does not solve the issue you're going to either have to reach out to Phoenix for a replacement jack or pick out your own. With that being said, the first thing you can…

view full answer...

Answer 2

When looking to purchase an electric trailer jack, there are a few features you want to keep in mind when comparing between brands. Power draw, weight capacity, and maximum lift height will be the features that will be important in deciding on the…

view full answer...

Answer 3

Hi William; thank you for being a loyal, long time customer! There are a few things you can check on your Bulldog Powered Drive Trailer Jack #BD500200. The first thing I would do is check the ground and make sure it is still secure. It could be your…

view full answer...

Answer 4

Anything that uses a wireless remote does have the potential to interfere with another wireless device. The best solution would be to use hardwired (traditional) powered jacks to avoid that issue completely. I recommend a different approach using one…

view full answer...

Answer 5

The Phoenix Electric Trailer Jack with Remote #UF38-944055 will retain its memory when the battery on your travel trailer is disconnected in storage. I have added an image of the calibration hole that is to line up with edge of the outer tube when…

view full answer...

Answer 6

I really like the Ultra Fab Phoenix jack part #UF38-944055 that you referenced. This would be a really great option to replace your manual jack. It has more than enough capacity as it can lift up to 5,500 lbs and also is one of the fastest moving…

view full answer...

Answer 7

The Ultra-Fab Phoenix Electric Trailer Jack with Remote- 5,500 lbs #UF38-944055 or 4,000 lb #UF38-944040 without remote sounds like it may have a mechanical issue. I recommend using the manual crank to extend or lower the jack. If you can use this,…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Warranty of Phoenix Electric Trailer Jack With Remote

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching