bing tracking image
  1. Camper Jacks
  2. Bulldog
  3. Pop Up Camper
  4. Teardrop Camper
  5. Travel Trailer
  6. A-Frame Jack
  7. Leveling Jacks
  8. Tongue Jack
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black

Item # BD500199
Retail:$523.54
Our Price: $349.61
You Save: $173.93
Camper Jacks
Shipping Weight: 24 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Forest River camper jacks experts, and offer a great price. etrailer.com carries a complete line of Bulldog products for your Forest River Rockwood Hard Side Camper 2017. Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black part BD500199 from Bulldog can be ordered online at etrailer.com. Complete camper jacks installation instructions and technical support.
  • All Info
  • Reviews (368)
  • Q & A (0)
  • Photos

Bulldog Camper Jacks - BD500199

  • Pop Up Camper
  • Teardrop Camper
  • Travel Trailer
  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jack
  • Electric Jack
  • 1 Jack
  • 22 Inch Lift
  • Bulldog
  • Bolt-On

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant.


Features:

  • Tongue jack positions quickly and easily with integrated drop leg
  • Powered drive provides quiet operation and efficient use of electrical power
    • No more hand cranking
  • Internal circuit breaker protects the motor from electrical shorts
    • Hook directly to power, no fuse required
  • Spring-loaded pull pin quickly releases the drop leg into position
  • Built-in level has springs for simple, accurate leveling
  • 3 LED lights make it easy to set up at night
    • Side-mounted spot lights are angled rearward to illuminate weight distribution brackets
  • 4" - 6" Overlap of tubes at full extension provides additional support for side loading
  • Easy-to-access on/off and retract/extend toggle switches make for simple operation
  • Corrosion-resistant, sealed, maintenance-free surfaces
  • Easily accessible emergency manual override in case of power loss
  • Black housing with sleek design protects motor


Specs:

  • Bracket height:
    • 9-3/4" Retracted
    • 31-3/4" Extended
  • Total lift: 22"
    • Screw travel: 14"
    • Drop leg travel: 8"
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Lift capacity: 4,000 lbs
  • Power wire: 10 gauge
  • 5-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



500199 Bulldog A-Frame Jack with Powered Drive, 22" Lift, 4,000 lbs

Replaces Bulldog BD500186

Installation Details BD500199 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black - BD500199

Average Customer Rating:  4.8 out of 5 stars   (368 Customer Reviews)

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant.

by:

Replaced stock Air Stream power jack which started making grinding noises. New 4,000 pound jack easy install and works fine. Using it to lift 25ft trailer and 2500hd Silverado to attach anti-sway bars. Had to mount it sideways due to propane tank cover, but it works great. Had one of these on a larger trailer that a hurricane destroyed. Nice unit and easy install.



by:

Overall the product does exactly what it's intended for and works well.
I however assumed that this would be a simple R&R for my camper and did very little installation research other that the video provided on etrailer' s website
Sadly it did not fit. Not at all. I didn't take into account that have a double framed hitch toyhauler. The baseplate on the factory leg was a TRIANGLE.....this unit was ROUND. Also the primary shaft was thicker than stock and would not drop down into place
I know modifying is frowned upon, but I found that ALL powered hitch legs I found have round mounting plates and it's not mentioned the leg tube is thicker than OEM?
Since NOT having a power lift wasn't an option for this camper application...too heavy in the front when ATVS loaded to lift for setting the equalizer hitch tension bars, I proceeded to modify by cutting the rear rounded mounting base ... square. Took off about 1/2 inch. Then I took my metal Dremel sanding bit and increased the hitch leg hole diameter slightly.
Took about 1 hr. Dropped it in. Wired it. Tested it. All good.
If you can't post this I understand, but take note that some of your website descriptions may need to be enhanced.
Thanks!

Bradley

7/15/2020

All good! Works as intended



by:

This has been a great trailer jack a year into installing it on my 12 x 6 enclosed cargo/camping trailer. The jack is out in the elements 24/7, gets used almost every weekend and is still going strong. I would definitely purchase this product again for my next trailer.



by:

Bulldog BD500199 installed on 2006 Jayco Jayflight 27BH. Bought this powered jack to replace the non-functioning electric jack that came with the camper we bought 6mo ago. We’ve been using the manual override on the old one, so having a working jack is going to be great:) Just installed this new unit yesterday, so have only used at home so far, but it seems to work very well. Speed is good. It has the drop leg with spring pin for quick adjustment which is cool. It has a built in light which is fairly bright and should come in handy for setting up at night. Installation was very easy. Literally had the old jack removed and new one in place in about 20mins and that included getting the jack stands set up. The hole in the A-frame was big enough for the larger diameter tube of the Bulldog unit, so no fitment problems. I’ve got photos showing the old unit and new. Forgot to take one with the jack removed. There was additional time wiring, but it was only another 20mins or so. Most of that time was spent deciding on routing and zip tying the wire. There is only one wire that hooks up to the battery positive post and there is an internal breaker in the unit so you don’t wire in an external fuse. Heads up there are no wire terminals in the kit, so you will need to have your own to crimp onto the wire. You’ll need a 10ga connector, likely a 5/16 or 3/8 ring terminal but could vary depending on your battery. The wire lead could have been another 12” longer, but it was just barely long enough to reach the positive post after I flipped the battery around to put the positive post on that side of the frame. Also should note that this unit has a dual mounting pattern that allows for turning the head unit 90deg to face sideways, which is what I ended up doing. Facing forward, the head of the jack was really tight up against the propane bottles/cover, so turning it sideways fit much better with our camper. Looks to be well built, so hoping it lasts a long time, and I’m looking forward to not using a manual override crank next time we go camping!



by:

It was very easy to install and it works great. The old tongue jack worked okay but this bully dog jack is smooth and powerful.

Herman

7/13/2019

Still giving great service, the small bubble level however has evaporated for the second time. The jack is strong and dependable.



by:

I ordered the Reese Bulldog 4000lb power tongue jack on 6/2 and received it on 6/6, my second order from etrailer and it came just as fast as the hitch that I ordered from them previously. The jack was characteristically well packaged so everything was received in perfect condition. The installation took a half hour, including hitching the trailer up to my truck and unhitching after the swap out. I did read the instructions quickly before starting and I would recommend that anyone doing the installation do so as well, just to avoid any hick-ups. Overall it was a very easy installation. Because of limited space I did have to mount the jack sideways, so I appreciate that Reese gave me that option. The one item that I did not finish was a permanent power hook-up. The power wire provided was too short so I will be putting a connector inline so that I can route the wire to the battery terminal.

Ross

6/6/2019

After a year of using the Bulldog tongue jack, I really appreciate how easy it makes hooking up the weight distribution bars on my hitch. Just push the Extend button and lift the connected trailer tongue until I can flex the weight distribution tension bars into place. These need to be standard equipment on travel trailers the crank jack that came with it was entirely inadequate/impractical for the work needed to lift the connected tongue to complete my hook-up.



by:

It’s been on our horse trailer & have had no issues. It was easy to install & use



by:

Works fine- no issues. I like the labeling on the ret/ext rocker switch. I noe don't have to guess which side of the switch to push.

Jim

12/2/2023

Works fine. I have no issues with it. It has good resistance to lateral forces and movement when decoupling from the hitch ball, even with wheel chocks in place. The body doesnt extend forward to interfere with my Dodge Durangos rear hatch opening.

Etrailer Expert

Mike L.

12/3/2023

@Jim We're glad the jack is working well for you!


by:

It’s a good, sturdy, and reliable Jack. I never have to worry if it’s going to work or not. Can’t say that about the cheap original equipment it replaced. It is slow but most are. I’m happy with this purchase.

Bruce

10/5/2023

Good to go. We’re on the road 45 days this summer and camped at about 12 different sites a lot of jacking and no issues.

Etrailer Expert

Mike L.

10/19/2023

@Bruce Great! Thanks for keeping us in the loop!


by:

This tongue jack works great. The trailer I put it on is a toy hauler and it has a very high empty tongue weight. I replaced the original jack that failed with a heavier duty one. Installation was easy, I secured the trailer, manually raised the old jack, unscrewed and removed the old jack, installed and screwed in the new jack, hooked up the electrics and I was done. Can't ask for more then that.



by:

I bought the Bulldog Powered trailer jack from etrailer because they not only have the best price, but amazing service, and shipping was rocket fast!! It took only three days to rural Colorado.

I watched etrailers video of the jack being installed that showed details and dimensions so i could be sure it would fit my application. The videos are well made and super helpful to ensure I got the right jack for my trailer.

Installation was a breeze, three bolts and one wire hookup and you're finished.
The jack works great and the lights are handy. I will say that it is not particularly fast, it is geared low and goes up and down slowly, but it works great and does exactly what it is supposed to do.



by:

Installed Bull Dog 4000 lb Jack today. Pretty straight forward install. I gave it a 4 star, everything worked fine. I would suggest adding some flat washers along with the lock washers , it gives the lock washer a little better surface to rest on I believe instead of the bigger holes on the Jack. The insulation on the wire was scuffed through to the copper in one little spot, not really a big deal just put some good super 33 electrical tape on it , and they could put a connector on the wire to hook to the battery . Overall very nice ,would absolutely purchase again. etrailer always has quality choices .



by:

Simple installation. Can't believe I went this long without a powered jack. Arrived sooner than expected. Great service.



by:

It is much more quiet than the original jack. It performs exactly as expect.



by:

This jack is great easy install love the led for night loading and they way it shuts off as it goes to the top nice product great price thank you Etrailer

David

8/9/2019

Still working great the top level bubble faded from sun but stills works great



by:

Great product, received it quickly, easy directions to follow. EASY to install!!

Michael

7/3/2022

Still working great!!



by:

It arrived quickly, was easy to install, fit right where the old jack was. The cover fit correctly. It worked just like it was supposed to. It is installed on a 10k gvw cargo/camper hybrid and jacks it no problem.



by:

Really easy to install, works fantastic. Single wire to the battery terminal and it is done!

Cliff

2/22/2023

I had one fail sadly. After about 4 months of use. Bulldog wasnt the easiest to deal with and I just bought a new one.



by:

Seems like excellent product but was packaged upside down so the level on top of the jack was broke. I called right away and they were more than happy to send me a New level for the jack. Installation was super easy only took about 10 minutes for the jack and when the new level gets here that will be very easy also. Over all great service by everyone I talked to at etrailer.

Daniel

7/1/2022

It’s been great awesome power jack for my camper I actually traded campers and took this jack and put it on the new camper



by:

Instructions, installation, and operation were flawless. My only issue was the packaging during shipment. It was shipped in its original box from the mfg. Unfortunately, the box was damaged in multiple locations and all the parts were loose inside. Nothing was lost and everything worked okay. It was unnerving receiving an item like that and wondering if it's as damaged as the box. could have done better on the shipping container.



by:

I installed the jack this morning. Very fast delivery from etrailer. Seems to work well testing it on the lot.

Suggested improvements. 1) I had to mount the jack sideways because of limited clearance so that is a good feature. But the jack had to face toward the right (looking from the front). This meant the spring loaded pull handle was under the trailer and took too much force for me to operate easily so I went with the standard pin. The mounting holes on the jack could be reconfigured so the jack faces left and the pull handle is forward in a sideways mount. 2) The power cord was barely long enough. It should be a foot longer. 3) The mount for the level has three holes and screws. It should have 4 so you can choose front/back or side/side leveling no matter how the jack is mounted.

Gordy

1/16/2018

The jack has performed well. Had to replace the level which Bulldog provided under warranty. I would recommend the jack.



by:

Free shipping, excellent customer service, easy installation and fabrication!



by:

Easy installation, power wire could be longer.



by:

I'm using it on my travel trailer, My old Lippert components jack (2 years old) was slowing down and took for ever to go up or down, I started bringing this huge heavy
piece of wood to cut down the time it took to hook and unhook the trailer. Problem solved with the drop leg. plus is good looking.

Umberto D.

8/22/2019

Its been a year, I like it so much when I traded my Imagine travel trailer I kept it, Now its installed in my new reflection 37 travel trailer, sits outside still works flawlessly and looks brand new. Recommend to others looking for a quality travel trailer jack, and the leg extension its a breeze to use specially on a pronounced incline spot.



by:

Works great when it works. I really like this Jack and wish I could give it 5 stars. I only gave it three stars because every time I use the Jack it blows a fuse when I try to hook up the w/d hitch. My trailer only ways 4k with 400 tongue weight which would make it a two star but it could be my wiring so I gave it a three, and don't expect the level to make it more than a couple of trips. It clouded up then broke within two months of install.

Etrailer Expert

Mike L.

2/20/2019

How are you powering the jack? Bulldog tells me that an inline fuse isnt necessary if the jack is powered by a battery onboard the trailer as recommended.


25
367
Show More Reviews

See what our Experts say about this Bulldog Camper Jacks

  • Mounting Bolt Hole Pattern For The Bulldog Powered Drive Trailer Jack # BD500199
    The Bulldog Powered Drive Trailer Jack # BD500199 has two sets of mounting holes on its mounting flange that are approximately 3.47" apart center-to-center. The two sets are spaced apart approximately 1" center-to-center.
    view full answer...
    Image 1 for
  • Recommended Electric Jack with Footplate
    Yes. The Atwood Footplate is confirmed to fit your jack. However, they've both been discotinued, but I have linked the page to our electric jacks with that 4000 lb weight capacity so you can see other options we do have available. For a great quality jack with a drop leg footplate, I recommend the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black # BD500199. This is an easy to use electric jack with all the components you are seeking.
    view full answer...
  • Does the Bulldog Powered Drive Trailer Jack Use a Ball Screw
    The Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black # BD500199 uses an ACME screw, not a ball screw. An ACME screw uses a trapezoidal shape thread to roll onto the lead screw and does not use ball bearings.
    view full answer...
  • Recommendation For How To Power An A-Frame Bulldog Powered Trailer Jack Power
    Technically, your A-Frame Bulldog Powered Jack, Item # BD500199, can be powered by the 12 volt circuit on a 7-Way trailer side connector which is in the 1 o'clock position where the wires connect if looking at the back of the 7-Way connector. However, the vehicle side may not have enough rated power for the jack which needs 30 amps. If there are other draws on the power then you could easily overload the wiring and even "burn-up" the 7-Way connector on 2002 Ford F-350. To have peace...
    view full answer...
  • Troubleshooting Malfunctioning Bulldog Power Jack # BD500199
    I spoke with my contact at Bulldog, and he provided several possible causes for the problem you are experiencing. The jack grounds via its attachment point to the trailer. In case there is excessive paint between the jack and the trailer frame, running a separate ground from the jack mounting flange to the trailer could possibly solve this problem. Make sure that the jack mounting flange is making direct metal to metal contact, and that there is no corrosion between the two that would...
    view full answer...
  • Troubleshooting Power Isues With the Bulldog Velocity Jack
    According to the details you told me, it sounds like you are running the Powered Drive Trailer Jack # BD500199 off of a battery on the trailer. Does the problem you describe always occur when the jack as at a particular height? If so, the jack tube might be slightly bent. The bend would cause the jack to bind once it reached a certain height. Manually operating the jack would extend or retract the jack past the point where the tube is bent, at which time the motor would be able to move...
    view full answer...
  • Troubleshooting The Bulldog Powered A-Frame Jack That Does Not Go Down
    The Bulldog Powered Drive Trailer Jack # BD500199 grounds through the mounting hardware. I would recommend running a jumper wire from the mounting flange of the jack to the ground wire on your trailer wiring to see if you can get it to work that way. The jack has an internal circuit breaker that automatically resets so the only other problem it could be is an internal problem. If that is the case you will have to purchase a new jack. I attached a review video link below.
    view full answer...
  • Dimensions of Bulldog Electric Jack # BD500199 from Mount to Motor Housing
    I went out to our warehouse to assist with the dimensions of the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black # BD500199. From the top of the mounting plate to the bottom of the motor housing is 12-7/8 inches. From the top of the mount to the lowest part of that housing that includes the light, the measurement is 11-5/8 inches.
    view full answer...
    Image 1 for
  • How Wide Is the Head on the Bulldog Powered Drive Trailer Jack
    From the center of the jack tube to the outside edge of the head cover on the Bulldog Powered Drive Trailer Jack # BD500199 is 4",and the head cover extends out 1" from the edges of the jack tube. I've attached some diagrams for you to check out as well.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Can The Bulldog Powered-Drive Trailer Jack # BD500199 be Installed in a 90 Degree Orientation
    There is no reason why you could not turn the jack at a 90 degree angle to gain more clearance. Due to the configuration of the holes in the mounting flange, you might need to drill new holes in your trailer tongue to mount the jack in that configuration. The motor housing cannot be repositioned on the shaft. Bulldog tells me that the edge of the motor housing is 1 inch away from the side of the jack tube, as shown in the photo I edited for you.
    view full answer...
    Image 1 for
  • Bulldog Powered Drive Stalling Powered By On Board 12V Battery
    It sounds like either the battery that the Bulldog Powered Drive Trailer Jack part # BD500199 is powered by is not getting a complete charge or I know you said you have double checked the ground but since the ground is through the mounting hardware you may want to run a jumper wire from the mounting hardware to the frame of the trailer to see if that gives it a sufficient enough ground. Other customers have had success grounding the jack this way. It could also be that the tube is slightly...
    view full answer...
  • Replacement Power Tongue Jack For a 2020 Keystone Passport Grand Touring Travel Trailer
    I recommend replacing your Lippert 1817941 with a Bulldog Powered Drive Trailer Jack # BD500199 on your 2020 Keystone Passport Grand Touring Travel Trailer. These type of jacks offer very few replacement parts and I do not see that anyone has replacement gears for their power tongue jacks including your Lippert jack. If the jack were under warranty they would replace the jack rather than just the gear. The jacks that offer replacement gears are generally jacks that are frame welded to the...
    view full answer...
  • Dimensions Of The Bulldog Powered Trailer Jack # BD500199
    The top of the motor housing on the Bulldog Powered Drive Trailer Jack # BD500199 is approximately 21-1/4" tall from the top of the mounting flange. From the center of the tube forward to the edge of the housing is approximately 4".
    view full answer...
    Image 1 for
  • Recommended Electric A-Frame Jack for 2010 Keystone Laredo
    IThe Bulldog Powered Drive Trailer Jack # BD500199 is rated for 4,000 lbs with 22" of lift. It does have a great 5-year warranty, compared to the 1-year or 2-year warranties of other electric jacks in its class. The Bulldogn # BD500199 has been well reviewed and Bulldog has an outstanding reputation for the quality of their jacks. Due to that and the long warranty if it were me I'd go with the Bulldog # BD500199.
    view full answer...
  • Will Bulldog Powered Drive Trailer Jack BD500199 Replace Manual Jack w/Triangle Mounting Bracket
    Yes, you can use the Bulldog Powered Drive Trailer Jack # BD500199 in place of your existing jack because the mounting hole pattern in the bracket will be the same between the 2 jacks. Provided that your existing jack also has a round outer tube that is 2-1/4 inches in diameter you will be good to go.
    view full answer...
  • Will Bulldog Powered-Drive Trailer Jack, # BD500199 Work on a 4,700 Pound Travel Trailer
    The total lift capacity of the Bulldog Powered-Drive Trailer Jack, # BD500199, is 4,000 pounds. If mounted on the tongue of the A-Frame trailer, the tongue weight cannot exceed 4,000 pounds. If you do not know the tongue weight of your travel trailer, it is typically 10 to 15 percent of the gross trailer weight. For a trailer weighing 4,700 pounds, the tongue weight would be 470 to 705 pounds. The jack mounts on a standard A-frame trailer, most of which use the same bolt pattern for mounting...
    view full answer...
  • Troubleshooting Bulldog Powered A-Frame Jack that Does Not Want to Function
    The Bulldog Jack # BD500199 that you referenced grounds through the mounting hardware so your best option would be to run a jumper wire from the mounting flange of the jack to the ground wire on your trailer wiring to see if that gets it to work. It has an internal circuit breaker that automatically resets so only other possible problem is an internal problem. For that you'd want to return it to where you bought it from.
    view full answer...
  • Quiet Electric Trailer Jack with Remote Operation for Use in Levitation Illusion
    I think the Ultra-Fab Phoenix # UF38-944055 is going to be your best option. It uses a ball bearing type of system rather than a screw and nut design like most jacks. These means less friction and thus less noise. It also comes with a wireless remote key fob that would probably work better than a foot pedal would and is easier to conceal. It will also give you a little more flexibility as to how the illusion is done since there would not have to be a cable and switch attached to the jack....
    view full answer...
  • Is There a Power A-Frame Jack That Can Rotate 90 Degrees
    There is a Bulldog jack that has numerous bolt holes to allow you to unbolt the jack and rotate it 90 degrees, the Bulldog Powered Drive Trailer Jack # BD500199. You can see an example of this in the linked video - just forward to about the 6:15 mark. This jack provides 22" of lift (9-3/4" retracted height and 31-3/4" extended height), has a 4,000 lb capacity as well as an outer tube diameter of 2-1/4".
    view full answer...
    Image 1 for
  • What is Included With the Bulldog BD500199
    The Bulldog Powered Jack # BD500199 comes with everything you need. This includes installation hardware, hand crank, and a spring-loaded pull pin that quickly releases the drop leg into position.
    view full answer...
  • What Weight is Bulldog Trailer Jack # BD500199 Rated For
    Trailer jacks like the Bulldog part # BD500199 that you referenced are rated for tongue weight. So this jack has a 4,000 lb tongue weight limit which would easily handle the 1,300 lbs of tongue weight that you have.
    view full answer...
  • Troubleshooting Bulldog Electric Trailer Jack with Dead Battery
    The Bulldog 4,000 pound Powered Drive Trailer Jack # BD500199 runs off the of a battery on the trailer or directly from the tow vehicle's battery depending on how you have it setup. If it's off the trailer's battery then you charge it by plugging your trailer into your tow vehicle and it charges from the vehicle's battery.
    view full answer...
  • Warranty Coverage of Bulldog Powered-Drive Trailer Jack # BD500185
    The Bulldog Powered-Drive Trailer Jack you mentioned, part # BD500199 is covered by a 5 year Limited Warranty. If you click the provided link, you can see a video showing the jack being installed.
    view full answer...


< Previous
123. . .4



Do you have a question about this Camper Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video by:
Andrew L
Employee Dustin K
Video by:
Dustin K
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Hayden R
Installed by:
Hayden R
Employee Shelly K
Written by:
Shelly K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924