What Brake Controllers are Compatible With Tekonsha 7-Way Harness TK24FR on 2020 Kia Sedona?

Updated 03/01/2024 | Published 02/09/2024

Products Featured in This Question

Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector

(18)

$190.43

Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness

(99)

$27.00

Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - Off-Road Mode - Proportional

(1693)

$317.00

Question:

Thank you very much for your prompt response. I have one last question for the moment, hahahaha can you connect another brake controller other than the one you mention?

asked by: Andrés H

Expert Reply:

The Tekonsha OEM Replacement Vehicle Wiring Harness # TK24FR for your 2020 Kia Sedona is going to come with a Tekonsha brake controller connector. So you will be able to use any Tekonsha Controller like the P2 # 90885 or P3 # 90195. Or the Redarc Tow-Pro Elite Brake Controller # RED63RR will come with the Tekonsha Adapter # 331-TPH-017 so you can use it with a Redarc controller. If you have a Curt or other brand controller you would need to cut off the connector to use it with your controller.

expert reply by: Bud M

Andres H.

2/29/2024

Good afternoon Bud, I have a 2020 Kia Sedona and a few days ago I bought the tekonsha TK24FR set from you. I know how to install it, but I wanted to know if you have installed it in a kis sedona, since I can't find where the cable can be inserted into the interior of the vehicle to connect the brake control, which I also bought from you, the tekonsha primus IQ

Bud M.

2/29/2024

@AndresH We have not installed the Tekonsha OEM Replacement Vehicle Wiring Harness # TK24FR on a 2020 Kia Sedona in our shop. I do see they use the same 2 connectors as the 4-Way # 118269 which we did perform an install video on a 2017 model year which you can see linked near the bottom of the page. The 2 connectors are in the drivers side of the rear bumper cover behind the rear tire. There is no interior vehicle connector as the wiring for the brake controller included with the kit runs from the back of your Sedona to the front where it also ties into a battery supply and ground connection. I hope this information helps you with the installation.

Helpful Links

tv-install-trailer-wiring-2017-kia-sedona-118269.aspx

Andres H.

2/29/2024

Hi Bud, I already watched the video, that part is very well understood. But I am installing the 7 way and with the brake control, so I have to take some cables to the cockpit on the pilot's side to connect the brake control, but I don't know where to put the cables into the cockpit, now. Under the car there is no, or no visible, hole to put the cables through, do you have any idea where it can be done? If you don't have the answer now, if you can find out for me, I would be very grateful, since I made a fairly large investment and I would like the installation to be good. Thank you very much

Bud M.

3/1/2024

@AndresH Typically we will go into the cab near the main wiring harness on the front of the cab. This can sometimes be difficult to find as they end up buried in other components but looking at your particular engine bay it looks like it is straight back behind the battery which is helpful since you will also be connecting to power for the harness. I wish we had a video for your exact vehicle but we are limited on what comes into our shop since we don't have relationships with vehicle manufacturers.

Andres H.

3/1/2024

@BudM Thank you very much for your help. When I do it I will try to make a video to send to you so you can have the most accurate information for another client.

Bud M.

3/1/2024

@AndresH You're Welcome!