Master Lock Adjustable Trailer Coupler Lock - Stainless Steel

See what our Experts say about this Master Lock Trailer Tongue Lock

• Can You Replace Stock Coupler On A 2023 ATC Raven Car Hauler With Demco Coupler # DM13205-95
  Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for you. When installing the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95, you will want to use 3/8 inch grade 5 bolts, that are approximately 1-1/2 inches long. Ten bolts will be needed five bolts on each side. For extra security I also...
  view full answer...
  
• Will Masterlock Coupler Lock Fit Demco EZ Latch Surge Actuator
  Yes, since the Masterlock coupler latch lock part # 2847DAT has a 1/4 inch diameter and has a usable span of up to 2-3/4 inches it would fit and work well on the Demco EZ latch style of surge actuator # DM8164311. I attached a review video for this lock for you to check out as well.
  view full answer...
• Can Demco 50-Degree A-Frame Trailer Coupler be Used on Horse Trailer
  You can absolutely use the Demco 50-Degree A-Frame Trailer Coupler with Jack Hole - eZ-Latch # DM13205-95 with a horse trailer. Couplers aren't specific to any kind of trailer, so as long as it has the specs you need, it will work for sure. This coupler will fii A-frame trailers, couples to a 2-5/16" hitch ball and has a 21,000 lb capacity. It can also use a pin lock, the Master Lock Adjustable Trailer Coupler Lock # 2847DAT. I have added links to video reviews for you to check out of...
  view full answer...
• Recommended Lock for Demco DM14040-81 Coupler
  The # BLTL-23 Blaylock coupler lock is compatible with a very specific type of coupler, the CollarLok like our part # BD028499, so it wouldn't be a good fit for a coupler like the Demco # DM14040-81. A lock like the # FA86-0015-316 or a latch type lock such as # 2847DAT would be your best fits.
  view full answer...
• Can Master Lock Adjustable Trailer Coupler Locks be Keyed Alike?
  Though we do have many coupler locks which can be keyed alike, unfortunately the Master Lock Adjustable Trailer Coupler Lock, # 2847DAT, is not one of them. There is an adjustable coupler lock which offers plenty of convenience in the BOLT Trailer Coupler Lock, # BL7025289. This lock can be coded to the ignition key of your 2004 Toyota Tundra so you do not have to carry any extra keys. I have added a link to a review of this lock, as well as the link to our page displaying each of our...
  view full answer...
• Replacement Lock for a GearSpace 34 Enclosed Cargo Carrier
  For your GearSpace 34 Enclosed Cargo Carrier for 2" Hitch # HGK826 you're going to want the Master Lock Adjustable Trailer Coupler Lock - Stainless Steel # 2847DAT.
  view full answer...
• Trailer Coupler Lock Solution for Coupler that is 4-5/8 inches Wide
  It looks like would need to get a latch coupler lock like a Master Lock Adjustable Trailer Coupler Lock - Stainless Steel, part # 2847DAT, for your trailer that has a flange width of 4-5/8 inches. I attached a link to a review video of this coupler lock for you to check out. We do not have a surround coupler lock that will be wide enough to fit on a coupler that has a distance of your trailer.
  view full answer...
• Does 1/4 Inch Diameter Snapper Pin Come in Stainless Steel
  The 1/4 inch diameter snapper pins we carry are all regular steel. For a stainless steel 1/4 inch diameter pin I recommend locking pin # 2847DAT. I have included a link to a video review for you. You will get the stainless steel construction you are after plus the added security of a lock.
  view full answer...
• Availability of Coupler Locks That Are Keyed Alike
  The Master Lock Coupler Lock # 2847DAT is not offered keyed alike but other similar coupler locks can be ordered in multiples that can use the same key. The linked page displays all coupler latch locks that are available keyed alike. These are offered in various lengths, such as the 1/2-inch span # e98885 and the 7/8-inch span # e98890. Once you choose your preferred lock simply select Keyed Alike from the drop-down menu tool on that page and indicate your desired quantity.
  view full answer...
• Can Master Lock Trailer Coupler Locks be Keyed Alike?
  The Master Lock Adjustable Trailer Coupler Lock - Stainless Steel # 2847DAT is not offered in a keyed alike option, so if you order 3 you will have 3 separate keys. If you want locks that are keyed alike, I recommend the etrailer.com Stainless Steel Trailer Coupler Lock - 7/8" Span # e98890 which you can select keyed alike from the drop down box after selecting your quantity desired. I've attached the link to all your keyed alike options.
  view full answer...
• Solution for Locking Gen-Y Hitch Gooseneck Trailer Hitch To Prevent Theft
  The design of the Hitch Gooseneck Trailer Hitch # GY73XR doesn't really allow for much in the way of security. The only thing you can really do is replace the safety pin that secures the T-handle with a lock. This would prevent anyone from lifting the handle which is required to remove the adapter. I wasn't able to get the diameter of the hole but you might be able to get a coupler lock with a 1/4" diameter through there like the Master Lock # 2847DAT. The only other option would be to...
  view full answer...
• Availability of Coupler Lock With a 5/16 inch Pin Diameter
  A pin with a 1/4 inch diameter, like part # e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter. If instead you meant that you needed one with a span of 5/8 of an inch then you will want to go with the Master Lock Adjustable Trailer Coupler Lock # 2847DAT which has a 5/8 inch adjustment setting. If you meant that the pin diameter needed to be 5/8 inches then you are looking for part # e98880.
  view full answer...
• Pin or Lock Recommendation for a Yoke Latch Coupler
  It sounds like you are talking about a latch pin which would go through the latch and prevent it from opening. It isn't a necessary part but usually what people do with the latch holes is use a latch lock. I recommend Master Lock Adjustable Trailer Coupler Lock - Stainless Steel Item # 2847DAT because it is adjustable to fit latches with different widths from 5/8 inch wide to 2 inch wide. The pin has a 1/4 inch diameter which is the most common latch hole size. I have linked a video review...
  view full answer...
• Weld-On Demco 50-Degree A-Frame Trailer Coupler For Jayco 23RB Travel Trailer
  The Demco 50-Degree A-Frame Trailer Coupler # 12660-97SP can be used on your Jayco 23RB. This weld on coupler has the same 21,000lb rating, EZ Latch 2-5/16" coupler that fits a 50-Degree trailer A-frame that the Demco 50-Degree A-Frame Trailer Coupler # DM16680-52 you found. Since it needs to be welded on it is only primed in a red primer to prevent corrosion. You will need a longer Coupler Lock like the Master Lock # 2847DAT since the Demco EZ Latch requires a minimum 3" coupler pin no...
  view full answer...
• Which Coupler Lock Set is Best for Use with Atwood Trailer Coupler 81911
  The Atwood Trailer Coupler 81911 that you have on your A-frame trailer can be locked in two ways, by securing the latch and by blocking entry of a hitch ball. The latch mechanism on the top can be locked with an item like the Dead Bolt # e98884. (This latch lock is one of the two locks included in part # e99039, which is our reference for the CT Johnson part RHC32.) But please note that this latch lock has a center span of only 1/2-inch; the coupler latch on your # 81911 requires a latch...
  view full answer...
• Pin Lock for Yoke Style Trailer Coupler
  The Master Lock Adjustable Trailer Coupler Lock # 2847DAT is a great lock to use to lock the yoke style coupler you sent in a picture of. I attached a picture of it used to lock a coupler just like yours for you to check out as well.
  view full answer...
  
• Are Bolts Necessary to Mount Adjustable Channel Trailer Coupler
  While I completely understand it can be a bit of a pain and more time-consuming than you'd like, I have to recommend you only use the included bolts that come with an adjustable channel trailer coupler such as # CTA-400. Using these bolts (which are grade 8 bolts) ensure the coupler maintains its capacity and stability for the safest towing set up. I know it's not the answer you were looking for but the only option to help prevent theft is to add a lock to the latch, the Master Lock Adjustable...
  view full answer...
• Trailer Coupler Lock Recommendation for a Bulldog A-Frame Coupler # BD43805W0317
  The Fulton Gorilla Guard coupler locks, like # 63227, fit on couplers that have a lip. That is part of what holds them in place. Since the Bulldog coupler, # BD43805W0317, does not have a lip, it would require a different type of lock. A lock like # FA86-0015-316, would be a good choice. It fits 1-7/8 inch, 2 inch, and 2-5/16 inch couplers. Another options is a lock like # 2847DAT. This type of lock will prevent the latch from moving. I have included a video review of the lock for you.
  view full answer...
• Comparison of the Deadbolt Coupler Lock and Master Lock Adjustable Coupler Lock
  The main difference between our etrailer.com Coupler Lock, item # e98890, and the Master Lock Adjustable Trailer Coupler Lock - Stainless Steel, item # 2847DAT, is the style of the locks. The Masterlock has the advantage of being able to be used on many different styles of coupler and has a normal style key that can be duplicated at a local hardware store. The Deadbolt has a short span, 7/8 inches, so it can be flush to prevent removal. This style is more compact than the stick and block...
  view full answer...
• Can an Additional Latch Lock Keyed to Match Lock Set 3784DAT be Ordered
  We may be able to accommodate you. You would need lock # 2847DAT. To get it keyed the same as lock set # 3784DAT we would physically have to pull the matching one from inventory. There is no guarantee that we will have that number in stock. But in order to start the ball rolling you will need to call customer service at 800-298-8924 and explain that you need # 2847DAT keyed to match the # 3784DAT lock set you already have.
  view full answer...
• Keyed-Alike Locks Similar to Master Lock Coupler Latch Lock 2847DAT
  We cannot control or select the key code for Master Lock Coupler Latch Lock # 2847DAT but we do have similar latch locks that can be ordered keyed alike although these do cost more than standard locks. Lock # e98888 has a 3-3/8-inch span and # e98886 has a 2-inch span; both can be ordered keyed alike by selecting that option before you add them to your cart. We also have BOLT brand locks that can be coded to use your vehicle's ignition key instead of their own keys. For instance, lock...
  view full answer...
• Hitch Receiver and Coupler Trigger Lock Compatible with Toyota Factory Receiver Width
  The 2018 Toyota Tundra factory hitch is built up around the pin so it is wider than usual and will not fit the traditional 2 inch hitch pin like found in # 2848DAT. You will simply need the longer hitch pin. The Trailer Hitch Receiver Lock - Extra Long - Flush Design for 2-1/2" Trailer Hitches # RH5-XL will work well for you and give you adequate space. If you want one that codes to your truck key, you can use the Bolt Lock # BL7023584. If you want the coupler lock as well then you...
  view full answer...
  
• Need Replacement Keys for Trailer Locks 377DAT and 2487DAT
  It sounds like you have a MasterLock Trailer Coupler Lock # 377DAT and a Master Lock Adjustable Trailer Coupler Lock # 2847DAT . In order to determine which keys you need, you are going to need the number that was stamped on the original keys and not the numbers from the locks. Unfortunately that is the only way to get replacement keys for these two locks. If you wanted to replace them with new locks, you could go with the exact same models as replacements. If you have the numbers off...
  view full answer...
• Locking Titan Zinc-Plated Straight Tongue Coupler T4853100 to Hitch Ball
  Yes, to secure/lock the Titan Zinc-Plated Straight-Tongue Coupler # T4853100 to the hitch ball you can use a latch lock like the excellent Master Lock # 2847DAT. This will insert through the existing holes on the latch to prevent it from pulling up and unlocking from the ball. It features a 4-Pin tumbler lock that discourages picking and the stainless steel shank will resist any rust or corrosion. I have attached a short video demonstration that you can check out as well.
  view full answer...

Do you have a question about this Trailer Tongue Lock?