Product Experts Available Now!
Call 1-800-940-8924
Tandem Axle Trailer Fenders w/ Backing Plates - Steel - 14" to 15" Wheels - Qty 2
(831 reviews)
Price: $424.98
In Stock
etrailer
Tandem Axle Trailer Fenders w/ Backing Plates - Steel - 14" to 15" Wheels - Qty 2
Part Number: HP32VR
In Stock
$424.98
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (831)
- Q & A (0)
- Photos
etrailer Trailer Fenders - HP32VR
- 14 Inch Wheels
- 15 Inch Wheels
- For Tandem-Axle Trailers
- Steel
- 72 Inch Long
- 9 Inch Wide
- Bolt-On
- Weld-On
- No Step
- etrailer
9" Wide x 72" long x 20-1/2" tall. These sturdy fenders each have a flat backing plate to mount flush with your tandem-axle trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
- Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Backing plates add extra protection for the sides of your trailer
- Close fit keeps dirt from building up between the fenders and trailer
- 1" Wide outer edge is rounded
- Sturdy, 16-gauge, cold-rolled steel construction
- Prime and paint the fenders to get corrosion protection and to match your trailer's finish
- Sleek teardrop design offers a clean, stylish look
- Weld-on or bolt-on installation
- Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation
- Made in the USA
Specs:
- Application: tandem-axle trailers with 14" to 15" diameter wheels
- Dimensions: 72" long x 9" wide x 20-1/2" tall
- Quantity: 2 fenders
- Weight: 15 lbs each
- 1-Year limited warranty
Note: Do not use the backing plate to mount the fender to your trailer.
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
MFS00071 Tandem Axle Trailer Fenders w/ Backing Plates - Steel - 14" to 15" Wheels - Qty 1
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
831 reviews
by:
Carz Central in Estherville IA
10/14/2026
Another amazing transaction with etrailer. You guys deserve 10 STARs!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mike L.
10/14/2026
Aww shucks, thank you! I've been to Ehsterville. In the winter. I'm sure it's nice in the spring!! Pretty little town.
by:
Rich C.
08/10/2026
Fenders arrived in good shape, two slight dings in shipping, but nothing I was concerned about. Seem to be pretty sturdy. I was surprised at how fast the shipping process was! Overall, very pleased!
by:
Timothy
05/15/2026
Received the 2 fenders wrapped on a bag. Pleasantly surprised that they were not damaged. Nice solid fenders. It would be nice for the inner fenders to have been welded. Not spot welded, but o took care of that.
James D.
5/19/2026
Appreciate your feedback Timothy! We’re glad the fenders arrived without damage and that you're happy with the quality. We also appreciate your comments on the inner fender welds and that will help anyone else curious about these fenders.
by:
Cary
03/22/2026
nice tandem axle trailer fenders. cost of fender with backing plates was less than purchasing them separately from other web sites.
by:
Marc
03/05/2025
Item fit as to be expected. Got a couple dings and scratches now as the trailer gets used to do trailer things.
Victoria H.
3/5/2025
It looks good, Marc! Thanks for including photos with your feedback as well. What are you hauling?
Victoria H.
3/11/2025
@Marc Sounds like you know how to have fun! I use to love watching my Dad run his 5.0 down the drag strip as a kid. What year is your Mustang?
by:
Jack
03/19/2026
Fenders were a perfect fit. Shipping was fantastic. Sent the right parts fast and they are sturdy probably stronger than the originals. I would definitely buy them again.
by:
Jim
06/23/2023
AS advertised, but not packaged very well, they arrived with a few very minor dings. I undercoated the fenders with truck bed liner paint, then primed and finished the top with black enamel. Hopefully, these should last a while. Overall they came out looking good. I'm happy.
by:
Nate
10/17/2025
Shipping was fast, fenders were easy to weld onto trailer, wiped down with Acetone before painting, project turned out great
by:
Shannon
02/24/2026
Heavier thickness than original. Sturdier due to the solid backing. Much better than the ones originally installed.
by:
Ben
10/09/2025
Difficult item to ship without some damage. Arrived with a bent corner. Not a huge issue. Fast shipping and delivery!
by:
James
04/02/2025
Solid Fenders. Had a small dent but not too bad. Was just from shipping and packaging.
by:
Dan
04/17/2025
Arrived very quick. Customer service was very good.
Rate the fenders 8 out of 10!
Thanks
Rate the fenders 8 out of 10!
Thanks
by:
Michael
05/09/2025
Fenders look great and shipping was A+.
by:
Burton
09/24/2025
I'm very satisfied. Thanks
by:
Debbie
09/29/2024
The service was great, we would definitely purchase from you again. My husband is building a trailer, and that's what the fenders are for. He hasn't put them on yet, but he will soon. Thank you so very much, it was a pleasure ordering from you, and if we need something else that you have, we will be ordering it from you, Take care, Sincerely Debbie Wormley.
by:
Gordon
07/15/2025
The fenders arrived a day early in perfect condition. Excellent price too!
by:
Robert
12/21/2023
Needed some fenders and they weren't available locally. Luckily I found etrailer online. The price was better and free delivery, which was fast and easy. Etrailer will be my first stop to shop from now on!
by:
Jimmy
11/21/2023
Oem quality same as Big Tex but half the cost. Will have to weld on mounting tabs but not a big deal.
by:
George
06/08/2024
Already put them on looking good fast shipping keep up the good work.
by:
Donnie
05/02/2025
arrived early, product is well made, purchasing was easy and straight forward
by:
Brett
04/08/2025
Great service !!
by:
Brian
04/10/2025
Looks just as I ordered
by:
Ron
02/01/2025
Very fast service and great all around
by:
Allen
08/20/2024
vary nice fit welded up nicely
25
831
true
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- Replacement Fenders for 2003 Champion 203 Boat TrailerHi Jeff; when you replace your fenders you want to do your best to match the dimensions of the existing fenders. Even if they were replaced at some point, that is the way to go about it. Do you know the length of your current fenders? The Tandem Axle Trailer Fenders w/ Backing Plates # HP32VR you were looking at measure 72" long x 9" wide x 20-1/2" tall and are designed for trailers with 14" to 15" diameter wheels. If that matches the length (or if it is really close) then these will...
view full answer... - What Steel Fender Is Closest to a 66" x 11" Tandem Axle Trailer Fender?Hi Diane, I know how frustrating it can be trying to find replacement parts for an older trailer. I looked through our selection, and the closest steel fender we have to what you're looking for is part # HP84VR. It's designed for tandem axle trailers with 15 inch to 16 inch wheels and measures 72 inches long, 10-3/4 inches wide, and 20-1/2 inches tall. The width is only 1/4 inch narrower than the 11 inches you're looking for, and the height is very close as well. The biggest difference...
view full answer... - Replacement Fender for 2008 Shorelandr V Hull Boat TrailerHey Kai! Is the Loadstar ST215/75D14 Bias Trailer Tire with 14" Galvanized Wheel # AM3S560 that you recently purchased from us (thank you, by the way) for your Shorelandr trailer? If so, we have the Fulton fenders in Silver # F008594-2 and White # F008574-2 that will work with this tire, but I doubt the style is the same as your rear wheels. Would you rather go with a tandem fender kit like the Kit # HP44VR or # HP32VR? Let me know what style fender you have and I'll be more than happy...
view full answer... - Are Tandem Axle Trailer Fenders Sold Individually Hey Scott, The Tandem Axle Trailer Fenders w/ Backing Plates # HP32VR unfortunately are only sold in pairs and not separately. I actually just bought a pair back in July for my buddy's boat trailer and was only needing one at the time too. We ended up just cutting both of the old fenders off and welded the new ones on but I would just hang onto the second one as a spare in case anything happens to one of your fenders in the future.
view full answer... - What Fenders will Work on My Nitro Boat Trailer with 14" Wheels that are 66" Long?Hello Tom, The ones that you were looking at, the Tandem Axle Trailer Fenders w/ Backing Plates - Steel - 14" to 15" Wheels - Qty 2 # HP32VR are going to be way too long as they are 72" long. If you can go with 65", the Tandem Axle Teardrop Trailer Fenders for Boat Trailers 14" Wheels - Qty 2 # HP34VR would be your best bet as they are made out of stainless steel which is great for boat trailer. Not sure what color your nitro is, but the shiny stainless could look pretty cool. Or the...
view full answer... - What Does No-Step Mean on Tandem Axle Fender HP32VRHey Ian, the "no-step" you saw on the tandem axle fender kits we carry like the part # HP32VR is in reference to whether or not the fender setup has a step built into the top of it. These don't have that but in general they are strong enough that you could step on them.
view full answer... - Center to Center Dimensions for Wheel Openings on Tandem Axle Trailer Fenders w/ Backing Plates - StHi Scott; the center to center wheel opening measurement is approximately 36" for the Tandem Axle Trailer Fenders w/ Backing Plates - Steel # HP32VR.
view full answer... - Availability of 72 inch Tandem Trailer Axle FendersHey William, we only have the 72 inch long tandem fender kit part # HP32VR sold in pairs and not individually at this time. I also checked and we don't have anything that is 72 inches long sold individually.
view full answer... - Are The Tandem Axle Trailer Fenders HP32VR Available Individually?Hello Dan I do appreciate you reaching out but the Tandem Axle Trailer Fenders # HP32VR are only sold as a pair, so we are not able to sell you just one. Replacing both at the same time is recommended. Or you can just have an extra one laying around for a spare.
view full answer... - Replacement Fenders for a Sundowner 737 Horse TrailerHey Richard, thanks for reaching out! The Tandem Axle Trailer Fenders w/ Backing Plates # HP32VR measuring 72" long x 9" wide x 20-1/2" tall is the closest thing that we have to those exact dimensions. These fenders are designed for 14" and 15" wheels so if that's what you have then this should work just fine.
view full answer... - What Type of Paint Should be Used for etrailer Tandem Axle Trailer Fenders w/ Backing PlatesYou'll want to pick up a paint for the Tandem Axle Trailer Fenders w/ Backing Plates # HP32VR that's designed for steel but that's about it. If you can find a paint that has good corrosion resistance then that would be optimal otherwise you'll have to recoat the fenders on a regular basis to ensure they don't start rusting.
view full answer... - Recommended 72" Long Fenders for a Tandem Axle TrailerIt sure is Harvey. We don't have any 70" long ones. We have two options for 72" long x 9" wide x 20-1/2" tall trailer fenders. Both of them are made of steel and have built in backing plates. The difference is going to be the tear drop extension in the middle of the fenders that separates the wheels. I have listed both options below: Tandem Axle Trailer Fenders w/ Backing Plates - Steel - Qty 2 item # HP32VR Tandem Axle Trailer Fenders w/ Backing Plates - Steel - Qty 2 item # HP82VR Unless...
view full answer...
Do you have a question about this Trailer Fender?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Sabrina W
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
9/10/2026
The fenders look great, nice job!!