Replacement Coupler for a inTech Car Hauler
Updated 09/02/2025 | Published 06/23/2025
Products Featured in This Question
Question:
I am trying to replace the coupler on my car hauler but cannot find one with the right bolt pattern. The trailer is a 9900 lb GVWR aluminum A-frame front inTech from 2011. The couple has a shape similar to a woleld-on hitch but is actually attached with4 bolts.on the top plate and one bolt on each side plate. Any ideas what will match? TIA
asked by: Bill L
Expert Reply:
Hey Bill! I went to inTech's website and we do not have an exact replacement for their coupler but we have something that will work. It's the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors item # DM16680-52.
The Demco item # DM16680-52 fits a 50 degree A-frame and has a 2-5/16" hitch ball just like you original one. It has a bolt on installation with the mounting holes drilled into the sides. This is actually going to be better than trying to line up with your already drill top holes since we know they'll be different.
I really like the Demco item # DM16680-52 because of the eZ latch. It's a simple convenient mechanism that allows you to hook up while the latch is in the closed position.
Why are you needing to replace your coupler?
(click to enlarge)
Continue Researching
- Search Results: a~frame trailer coupler
- Search Results: trailer hitch ball mount
- Search Results: trailer coupler
- Search Results: drop hitch
- Search Results: receiver
- Search Results: bulldog coupler
- Video: Installing the Demco 50-Degree A-Frame Trailer Coupler on a 2020 Mantis Travel Trailer
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K
- Shop: Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2-5/16" Ball - 12,500 lbs
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Video: Detailed Breakdown of the Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
- Video: Review of Demco A-Frame Trailer Coupler - EZ Latch Coupler - DM16680-52
- Shop: Curt Forged Ball Mount for 2-1/2" Hitches - 2-1/2" Rise - 4" Drop - 20,000 lbs
- Search Results: hitch pin
- Shop: RV Jack Pads
- Shop: Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole - 50 Degree - 2-5/16" Ball - 14K
- Shop: Gen-Y Hitch Trailer Coupler - A Frame Mount - SnapLatch - Black - 2-5/16" Ball - 20,000 lbs
- Shop: Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2-5/16" Ball - 21K
- Q&A: Size and Type Bolts Required to Install Demco A-Frame Trailer Coupler with Hole for Trailer Jack
- Q&A: Is There a Trailer Coupler Repair Kit for Trailer with 2-5/16" Coupler
- Q&A: Bolt Size to Install Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch
- Q&A: How to Measure Trailer Frame Angle for Coupler
- Q&A: Availability Of Yoke-Style A-Frame Coupler For 2-5/16" Ball
- Q&A: Recommended High-Capacity Silver-Painted or Zinc Plated A-Frame Trailer Coupler
- Q&A: Which Is Better a Cast Steel or Stamped Steel Coupler
- Video: The Low-Down on the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Trailer Jack
Jerred H.
9/2/2025
Hey Bill, did the Demco A-Frame Trailer Coupler work out for your car hauler? I'm curious to know if it was a good fit for your needs, as it might help others facing the same challenge.