View Cart

Subaru Crosstrek Trailer Wiring

Select Vehicle Year

  
Trailer Wiring

Available Years for Subaru Crosstrek Trailer Wiring


Trailer Wiring Harness

Make installing your trailer wiring harness as easy as possible with a custom fit wiring harness. Trailer wiring from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, and Hopkins eliminates or reduces the need to cut and splice wires. It also helps to protect your vehicle's sensitive electronics from mis-wired trailers.

Choose the year of your vehicle to the left to find a custom fit trailer wiring harness.




Wiring Adapter Fitguide



Trailer Connectors and Adapters



Wire and Wiring Accessories



Trailer Wiring Manufacturers



Search For Custom Fit Subaru Crosstrek Accessories
Select A Category Below



Subaru Crosstrek Custom Fit Vehicle Wiring Videos

Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2019 Subaru Crosstrek

Today in our 2019 Subaru Crosstrek, we're going to be installing Hopkins plug-in simple vehicle wiring harness. This four-pole wiring harness is going to provide you with all the necessary lighting you need to haul your trailer. It'll give you your left turn signal, right turn signal, tail lamps and brake lamps, keeping you DOT compliant in all states. The module is pre-installed onto your harness, will protect your vehicle's circuits by shutting down any of your trailer's circuits that may have a short on them, preventing any damage to the vehicle. Located on our four-pole connector here, we have a dust cap to keep out any dirt and debris, ensuring long-lasting operation of our harness.We'll begin our installation at the back of the vehicle. You'll need to access your rear compartment, so we're going to flip this up.



Trailer Wiring Harness Installation - 2019 Subaru Crosstrek

Today on our 2019 Subaru Crosstrek, you're going to be taking a look at . I'm going to show you how to install the T-One vehicle wiring harness support full flat trailer connector. Part number 1-1-8-4-6-7.this is what our wiring looks like when it's installed. This is going to give us all the proper lighting functions to safely tow our trailer. So it's going to give you both turn signals, running lights, brake lights, and our ground. It's also going to come with an attached dust cap to keep any dirt or debris from getting onto our connections.



Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2018 Subaru Crosstrek

Speaker 1: Today, in this 2018 Subaru Crosstrek, we'll be having a look at, and showing you how to install, the Hopkins Plug-in Simple Vehicle wiring harness with four-pole flat trailer connector, part number HM11143865.Here's what our wiring looks like installed. You'll notice we have an adequate length wire to secure it to the safety chain loops on our hitch, with the provided dust cover. Once you're ready to tow, you can unclip the dust cover, and hook up to your trailer. This wiring harness is great because it plugs into your vehicle's factory tow package wiring, with no cutting or splicing required, and gives you the basic lighting functions that are required by law in order to safely and legally tow a trailer.Our green wire provides our right-turn signal and right brake light. Our yellow wire provides our left-turn signal and left brake light. Our brown wire is for our tail lights and marker lights.



Trailer Wiring Harness Installation - 2018 Subaru Crosstrek

Speaker 1: Today, on our 2018 Subaru Crosstrek, we'll be having a look at and showing you how to install the Tekonsha T-One vehicle wiring-harness with a 4-pole, flat trailer connector, part number 118467.One nice thing about this wiring harness, if we're not using it, we can easily conceal it and store it inside the spare tire compartment of our vehicle. Now when we want to use it, we can grab the wiring harness, pull it out, drape it over our hatch, make sure it's to the side of our latch, and close our hatch down over it, and we have an adequate length of wire to reach down by the receiver of our hitch to hook up to our trailer. Now this wiring harness is great, because it requires no modification of the vehicle in order to install it. It hooks right up to your vehicle's existing, factory-installed, tow-package connector, and provides the necessary lighting functions that are required by law in order for you to safely and legally tow a trailer.This green wire here provides our right turn signal and right brake light. On that circuit, we have 2.1 amps of power output, which is sufficient to tow a trailer that has one incandescent light bulb on that side. If you have LEDs, since they draw less power, you can run a few more light bulbs.



Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2017 Subaru Crosstrek

Today on our 2017 Subaru Crosstrek, we're going to take a look at and show you how to install the Hopkins Plug-In Simple Vehicle Wiring Harness with the Four-Pole Flat Trailer Connector. Part number is HM11143865. This is what our wiring kit's going to look like when we pull it out of the package. This really is a pretty simple straightforward kit to install. Basically, we're going to have a plug in the back of the Crosstrek. It's a factory plug. We'll be able to plug this directly in.



Best 2017 Subaru Crosstrek Trailer Wiring Options

Today we're going to be taking a look at the best wiring options available for the 2017 Subaru Crosstrek. Here we have our Tekonsha T-One Vehicle Wiring Harness. It offers the four-pole flat trailer connector. Its part number is 118467. We also have the CURT. This is also a plug-in style offering the four-pole flat trailer connector.



Best 2016 Subaru Crosstrek Trailer Wiring Options

Today we're going to be taking a look at the best wiring options available for the 2016 Subaru Crosstrek. Here we have our Tekonsha T-One Vehicle Wiring Harness. It offers the four-pole flat trailer connector. Its part number is 118467. We also have the CURT. This is also a plug-in style offering the four-pole flat trailer connector.



Trailer Wiring Harness Installation - 2017 Subaru Crosstrek

Today on our 2017 Subaru Crosstrek, we're going to take a look at, and also show you how to install the Curt T-connector vehicle wiring harness with the 4-pole flat trailer connector. Part number is C56040. Now, this is what our wiring kit's going to look like when you get it out of your package. You can see this is the main goal. This is what we're looking for. This is going to be a 4-pole flat trailer connector. We can hook it up to a trailer, or cargo carrier, or something like that and have lights that work.



Trailer Wiring Harness Installation - 2017 Subaru Crosstrek

Today on our 2017 Subaru Crosstrek, we're going to take a look at and also show you how to install the Tekonsha T-One vehicle wiring harness with a four-pole flat trailer connector. Part number is 118467. Now this is what our wiring harness is going to look like when we pull it out of the package. It's going to give us our right turning brake, our left turning brake, our running lights, and also our ground for our trailer. Now to do that, we're simply going to plug this in in an already existing port in the back of the Crosstrek. It's going to make it nice and simple. It gets its power from the dedicated power source and it's going to get all of its signals from the lights coming in through here.