Accessories and Parts   x   >    Wire Protection   x   >  

Keep dirt and grime out of your trailer's 7-way connector when it's not in use by covering it with this durable rubber cap. Built-in tether ensures that cover hangs from plug when popped off so that you won't lose it.

Cover fits over a 30-amp female, twist-lock connector (A10-30FDT - sold separately) to provide a weatherproof connection with the threaded ring on your RV's power inlet.

Cover fits over a 50-amp female, twist-lock connector (A10-50FDT - sold separately) to provide a weatherproof connection with the threaded ring on your RV's power inlet.

Replace the plug holder that came with your EZ Connector trailer-end connector.

This plated steel cable guard connects to the back of your single-pole connector plug and prevents the incoming wires from crimping. Guard includes a handy loop for hanging up the connector when it is not in use.

This rubber boot fits over the back of your single-pole socket to protect the wire connection from dust and moisture.

Replace the dummy plug that came with your EZ Connector vehicle-end trailer connector. Plug keeps dirt and debris off of socket contacts.

Keep your trailer wiring up off the ground with this holder. The hook can be bent to set your cable in whichever position you want. Simple, bolt-on installation.

This rubber dust cap fits over a Wesbar trailer- or vehicle-end, 4-wire flat plug to protect it from damage caused by dust and corrosion.