How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector

Question

Question:

I have a 2020 Lance 865; the camper side plug has 7 "holes" in it; the lance proprietary truck side plug (outlet) has 6 pins. Will this work? They don't sell a 7 pin Lance plug.

asked by: Mike R

0

Expert Reply:

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item # e99011.

Here are the individual functions of that Lance 6-pin:

Black Wire: 8 Gauge, 12-volt power
White Wire: 8 Gauge, Ground (-)
Green Wire: 14 Gauge, Running Lights
Red Wire: 16 Gauge, Left Turn Signal
Brown Wire: 16 Gauge, Right Turn Signal
Yellow Wire: 16 Gauge, Back-up Lights

expert reply by: Jerred H

0

John A.

4/21/2025

I have a 2002 Lance 921 with a 6-way connector. Is this the same kit I would need to fit my 2022 Chevy 3500's 7-way?

Reply

Jerred H.

4/21/2025

@JohnA Yes, it is! That Lance 6-pin is incompatible with just about everything so the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item # e99011 is exactly what you need to convert it to a standard 7-way.

Reply

Steve G.

6/26/2025

I have a 2021 Lance 650 with the 6 pin proprietary I just bought. To get me home, will a standard 7 pin with junction box with a 10AWG black work? The camper has a small 3 way fridge, and one 100ah lead acid battery. Is it imperative that the black is 8AWG?

Reply

Jerred H.

6/26/2025

@SteveG Yes, 10 gauge will work in your situation.

Reply

Steve G.

6/26/2025

@JerredH thank you! What is the benefit of going with an 8G black and white? If I were to install a 10g black and white today, it is important I immediately switch out to the 8G kit when I get home? I should add, I just purchased the camper in Texas, but am camping in it this weekend in Northern AZ before heading back to Phoenix. What am I at risk of if I run the fridge while driving?

Reply

Jerred H.

6/26/2025

@SteveG It won't conduct power as well. You'll lose voltage when you drop to 10 gauge. 10 gauge will get you home but I would swap it out before you go on your camping trip. Depending on how long the drive is you may not be able to recharge your battery, while powering the fridge.

Reply

See All (5) Replies to Steve G. ∨

John W.

7/20/2025

Jared, I’m picking up a2024 Lance 855S truck camper. I have a 2025 Ford F350 it will be going on. The Lance has the 6 wire as stated. So if I buy the box that you suggest will this run my 3 way fridge ok? Will this be a permanent solution or do I need to rewire something better when I get it home? Also my mechanical skills are limited. Is it as easy to do as your video shows? Who knows what the weather may be when I get it. Thank you for your time and patience.

Reply

Jerred H.

7/21/2025

@JohnW Thanks for all the information and congrats on your new camper. All of the functions of your camper will still work like they do now when you install the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item # e99011 in place of the Lance 6-wire connector. Essentially, the only thing changing is the connection to your truck and that will be a permanent solution. This is extremely easy to do, however I wouldn't attempt to do it in the rain! You will need some wire strippers like item # PT43ZR.

Reply

Johnw

7/21/2025

@JohnW Jerrod, Would the Blue Ox 88206 6 to 7 plug adapter work? Thank you

Reply

Jerred H.

7/21/2025

@Johnw No, the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord item # BX88206 is a flat towing connector. That's a proprietary connector that Lance uses, which is why nothing else works with it.

Reply

Mark S.

7/22/2025

Jerred H. Question. So where do you mount the junction box? I assume to the Lance camper. And then the cable with the 7 pin can simply plug in to the bed mounted 7 pin receptacle. But my question is how do you run the two 8G wires from the battery? I just purchased this camper and trying to sort through all the rigging. Mark

Reply

Jerred H.

7/23/2025

@MarkS Where you mount the junction box item # e99011 is going to come down to personal preference and space available where it won't get in the way. The box is weatherproof and is designed to be mounted on trailer tongues so you can put it anywhere. You shouldn't have to run additional wires from your battery. You'll just need to cut the Lance connector off and then run the individual wires to the junction box.

Reply

Mark S.

7/23/2025

@JerredH I get the picture if it is used on a trailer. But the Lance slide in camper has to be set up where it can be loaded and unloaded in the truck. So I guess the there would still have to be a connection from the junction box to connect the two 8 ga wires. The running lights would all run through the round 7 way coming from the junction box. I may be over thinking it. Sorry. Mark

Reply

Jerred H.

7/23/2025

@MarkS You're good! It helps to talk it through sometimes. I recommend looking behind where the Lance Plug is located and seeing if there is space back there.

Reply

Eric C.

8/16/2025

Does this come in a longer option? I'm looking for an 8 or 10 foot cord.

Reply

Jerred H.

8/18/2025

@EricC There isn't another kit, however you can buy the pieces separately and add a longer cable. Here are the parts you'll need: Junction Box - item # 3375601101 8' 7-Way Cable - item # H20046 or 10' 7-Way Cable - item # 50-67-005

Reply

Answer 1

The 6-pole sockets that we carry can only handle up to 12 gauge wire so the only way to really swap away from Lance's proprietary connector would be to treat it like a standard camper and switch to a junction box and 7-way connector like parts…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Answer 4

Hey Shawn, I really like that boat! If you didn't already I recommend actually measuring to make sure a 36" extension is really what you need. At 36" the only thing that can handle that kind of tongue weight is the TorkLift SuperTruss…

view full answer...

Answer 5

Hey Barry, so the GE Profile Propane RV Range with Glass Cover #GE24VR used to come with a glass lid but it looks like they updated it and now it is sold separately like with the part #GE74VR.

view full answer...

Answer 6

If you'd be willing to cut off the Lance connectors and wire in 6-ways or 7-ways in place of them we can help, but at this time only Lance can get you that specific connector. You could use the part #A7WCB with the #PK12-707E and you'd have a…

view full answer...

Answer 7

Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is indeed compatible with air bags when installed on your 2024 GMC Sierra 3500. This is the right bar for your stock height truck. I would stay away from the Air Lift air…

view full answer...

Answer 8

Hey Frederik. We do not have a wiring adapter for a 13 pin connector but I do have everything you need to convert your trailer to a standard 7-way and/or your VW to a standard 7-way. To convert your trailer you'll need the following parts: Curt…

view full answer...

Answer 9

Hey Kyle, so I checked with Torklift and we actually have the numbers wrong on the 21 inch version. The #TL46CR is actually rated for 550 lb tongue weight and 5,500 lb total trailer weight.

view full answer...

Answer 10

Hey Matt, thanks for reaching out. I took a walk out to our warehouse and measured the TowSmart Trailer Hitch #TS46VR. I measured 2-7/8" between the mounting flanges. I snapped a picture for you too. This TowSmart #TS46VR is a custom fit hitch…

view full answer...

Answer 11

The correct rear Torklift camper tie down for your 2020 Ram 3500 that has a Torklift Super Magnum Hitch is the part #TLR3510.

view full answer...

Answer 12

As we do not carry the Atwood jacks, I cannot confirm the fitment without knowing the measurements. However, the bolt holes on the HappiJac Swing Out Extension Brackets #LC182496 will measure 7-1/4" between all the bolt holes, picture included.…

view full answer...

How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector

Product Page this Question was Asked From

Continue Researching