Hitch, Wiring, and Brake Controller for 2000 Toyota Tundra  

The 2000 Toyota Tundra didn't have the plug and play connector under the dash, so your controller which is the same as the Tekonsha branded #TK63VR that we carry would need to be hardwired in. Don't worry, it's a pretty simple…

The Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors #HM43385 is a fit for 2003 - 2006 Toyota Tundra with factory 7-Way. For your 2000 Toyota Tundra, there is only a 4-way trailer connector available…

I reached out to my contact at Draw-Tite and they believe the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" #37130 will fit your 2000 Toyota Tundra with the factory towable bumper, but they can't confirm it absolutely will…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

Hey Mitch! For your 2000 Toyota Tundra with the 4.7L V8 and no factory tow package, I recommend the following setup to get you ready to tow your Fleetwood travel trailer: -etrailer Class III Trailer Hitch Receiver #e87KR -Curt T-Connector Wiring…

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

Hi Richard! Yes, the Curt Trailer Hitch Receiver #C37RV will fit your 2026 Santa Fe Hybrid. The installation process will be the same. We actually installed this on a 2025 hybrid so you can use that as a guide. I attached a link to the video further…