Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
(217 reviews)
Price: $79.66
In Stock
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Item # D210
Retail:$109.08
Our Price: $79.66
You Save: 27%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (217)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - D210
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 0 Inch
- No Ball
- 7500 lbs GTW
- Class III
- CURT
- Built-In Dual Hitch
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball
- 2" Square receiver allows you to carry hitch accessories while you tow
- Perfect for a bike rack or cargo carrier
- Sturdy steel is black powder coated for corrosion resistance
- Hitch pin and clip included - hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Ball mount
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Ball hole diameter: 1"
- Drop: 2-1/4" from top of inside of vehicle's hitch opening to top of ball platform
- Length: 12-1/2" from center of hitch pin hole to center of ball hole
- Accessory receiver size: 2" x 2"
- Tongue weight: 750 lbs
- 7-1/2" Extension from center of hitch pin hole to center of accessory receiver's hitch pin hole
- 3-9/16" From top of shank to bottom of accessory receiver
- Pin hole diameters: 5/8"
- Limited lifetime warranty
Notes:
- The receiver portion of this unit is designed for hitch-mounted accessories only.
- Do not use with an additional ball mount to tow a trailer.
- When mounting an accessory in this receiver, your hitch's tongue weight capacity will be reduced by 50 percent.
- When using both the ball mount and the receiver the tongue weight capacity is not affected.
45810 Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs - D210
Average Customer Rating: 4.8 out of 5 stars (217 Customer Reviews)
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing.by: Debbie04/21/2021
This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.
by: Ray12/21/2020
We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack.
The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.
Ray H.
12/22/2021
Great solution for taking our bikes camping while towing our trailer
by: bruce11/02/2021
Once the bike rack and the ball are installed there is only 3" of space for the trailer coupler to attach to the ball. Mine open hitch height is 4 ½”, most others are similar. I cannot think of any trailer/rack combination that this could even be used for. The only way it could be used would be to hitch up the trailer then attach the rack then load the rack over the trailer. Not a good or safe proposition. The only way to detach the trailer would be to unload the rack and then remove it from the mount.
Jenny N.
11/3/2021
Thank you for your feedback. The solution that I have would be to switch to a hitch mounted tow bar that slides into the RV receiver - making sure that the brand matches base plate - and then you could use a hitch adapter like part # RM-077-6. You would also want to make sure that the tow bar was as level as possible.
by: Carol12/01/2023
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
by: peanuts06/26/2014
I have been looking for a light up trailer hitch for a long time. So when I saw this one from etrailer I was very happy. I ordered it and it came in few days.
I also purchased the Curt Multipurpose Ball Mount with 2" Receiver so I could mount the light and still be able to tow with out switching them out. Both Product's are perfect for my needs. Your company is the best and I would definitely recommend Etrailer to others.
Thanks for the great service!
by: Stephen E06/16/2020
Installed on my 2006 GMC Envoy. Mounted a Bump Step with a self installed camera. Now have full access for adding my trailer as needed.
Stephen E.
6/17/2021
Absolutely still in love with this product!
by: Mike11/12/2017
Extremely heavy duty. I will be towing a small aluminum boat behind our camper, and will build a 2 X 2 tube assembly to carry the spare tire on. I needed something to help carry my trailer spare as the hitch on the camper is mounted in such a way that I couldn't hang my spare tire on the bumper. This assures a way to carry the spare as well as tow my fishing boat!
Mike
Mike H.
11/15/2018
A year later, still functioning as designed. I found my hitch pin hole to be slightly off but was able to make it fit. Still hauling the boat and carrier.
by: Ron10/13/2018
Delivery was fast. Arrived in well packed box. Installed product with no issues at all. Works great and as advertised. Will be towing a travel trailer and needed a connection for a bike rack. When all installed, have plenty of room for placing bikes on bike rack. Really like this product!
by: Chris H03/08/2017
We use this on a luggage carrier on a Mercury Grand Marquis. My son hauls lawn mowers on the rack and it works great. Very well made
by: John01/26/2023
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
by: Andrew 09/06/2023
Great product. Highly recommend.
by: Billy 10/19/2023
Great customer service and excellent pr oduct.
by: VickieB6803/15/2017
Raised receiver portion was exactly what I needed to attach my cargo carrier, as my Grand Caravan Receiver was too low to the ground.
by: Wesley 09/12/2023
Perfect fit Excellent finish
by: Chris M03/23/2023
I have bought several items from etrailer. They always keep you informed of delivery status. The deliveries are always quite quick. The products are quality and top notch. I will buy from them again and highly recommend.
by: Gary06/02/2022
this ball mount will now allow my tow behind car to pull it's tow dolly and my bicycle rack to the storage lot where my RV is stored. I would like to see this product available with addition drop heights, like a 4" & a 6". A 6" drop would allow my RV to hold my bike rack while also pulling my tow dolly/ tow behind car.
by: Chris10/05/2021
Disappointing. Although the manufacturing quality is consistent with Curt's normally high standards, the design leaves everything to be desired. There is not enough clearance above the trailer tongue coupler latch to mount a bike rack. Even if you somehow manage to overcome this, most bike racks won't clear a telescoping jack stand. I should have sent this one back!
Sierra K.
10/14/2021
A very valid issue. It can be done, but you will have to measure carefully to see if this piece will work with your set up. The measurement is 3 and 9 sixteenths of an inch from the top of shank to bottom of the accessory receiver. I recommend getting a bike rack with a rise as this will be the best option for you.
by: Chad07/26/2012
This multi hitch receiver fits our needs great. We need to use it for hooking up our pop-camper and for our bike rack. With this receiver, we can now take our bikes with us and not have to mount the bikes on the camper.
The delivery time was fast. We ordered this on a Sunday evening and we received it on Wednesday.
The only thing that we would change is that if the top receiver was about an half inch or more higher, then we would have more than enough clearance for our camper locking part, but there is enough clearance to make this system work.
Stefan
6/14/2013
how many bikes does your bike rack hold? and, have you noticed any problems with turning sharp corners and your bikes coming into contact with your tent trailer?
Patrick B.
6/18/2013
I will send Chad an email about your question. If he has anything to add, it will appear below his original review so keep an eye there.
Turning ability is going to vary greatly depending on trailer shape and size, as well as the bike rack used and the shape and size of the bikes themselves.
Also remember, this ball mount has a tongue weight capacity of 750 pounds. That means the tongue weight of the trailer, the weight of the bike rack and the weight of the bikes has to be less than 750 pounds or the tongue weight capacity of the vehicles hitch, whichever is less. If you need to carry 4 bikes and have a pretty hefty camper, this may not be the best solution. You can always contact us and let us know what you need to accomplish and we can certainly help you find a solution.
by: RHK02/06/2017
This is a heavy duty receiver it will work great for towing a trailer and having the ability to add a bike rack or cargo carrier. Etrailers coustomer service is outstanding always easy to order and fast shipping with great prices.
Rhk
2/6/2018
The receiver is still working great no problems or issues are all.
by: Kelly B06/17/2017
Great product, but did not fit on my 2014 Traverse. The top receiver would rub on my fiberglass bumper of the Traverse and therefore only half the pin hole would line up with the receiver. Plus my 4 bike rack would not fit between car and pop up camper then.
Kelly B.
6/19/2018
Works wonderfully. Use it a lot and couldn’t be happier .
by: Robert G.05/15/2012
WOW! This piece of gear is built so solid that it is never a worry hooked up to my motorhome, towing a two wheel dolly with a Jetta Diesel Sportwagon and a 4 place bike rack in the upper reciever!
The turn around time between order and delivery was very quick and I was kept aprised of shipping during the entire time.
Thanks!
Anonymous
9/9/2015
It appears that other comments say that in order to remove the car dolly from the ball, you have to remove the bike carrier. This seems to make the whole thing not very good. You do not mention this problem. It appears from the comments, the problem relates to the lack of space between the two receivers
by: Stan06/15/2018
I have never seen a hitch like this one, that I found on etrailer.com. I saw this hitch, and knew it would be perfect for my side by side, and it is. I can hook up to a small trailer, and then unhook, and slide in a feeder in the top receiver, and feed the roads of our hunting lease. This thing is perfect!!
Stan O.
6/15/2019
Perfect!
by: Ron05/07/2022
This was recommended to us to stop the holder we were using to carry my medical scooter from dragging on the ground and as you can see the lower part of it dragged on the ground and made it even worse and that was advice from them I have no idea how there's so many ratings for this that are above average. The cage or lift that we had on our vehicle from this company dragged all the time not a good product
Katrina B.
5/9/2022
The GTW of this ball mount is 7500 lbs. We will need to know what your vehicles GTW is, and we will also need to know the measurement from the ground to the bottom of the hitch receiver. Once we have this information, we should be able to better assist you.
by: Doug T.07/20/2015
This was just what I was looking for to raise my cargo carrier above the level of my car exhaust and will work for my bike rack as well (not at the same time). It will also allow more room to open the rear lift gate. Product appears to be of high quality but I haven't had a chance to use it yet. Shipping was fast.
Doug T.
7/19/2016
Ive had the receiver about a year now and have used it several times. Its well built and and works for what I purchased it for.
by: Tampa Doug10/15/2016
Maximize fun with this accessory! Made kayak trailer towing with a hitch mount bike rack easy and efficient.
Tampa D.
10/15/2017
Working great. Still going strong.
25
217
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Compatibility of Curt Multipurpose Ball Mount with 2 Inch Receiver using ATV Guard Dog Tie Down The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210 can be used to tow a trailer and secure the 4 wheeler using the Louisiana Guard Dog ATV tie Down. Because you will be using an accessory in the receiver portion the tongue weight capacity of your trailer hitch receiver will be reduced by 50%.
view full answer...
- Solution for Cargo Melting in Cargo Carrier on 2013 BMW X3The best way to get the cargo out from in front of your exhaust is by adding rise to your hitch via an extension. The Curt Multipurpose Ball Mount # D210 will give you nearly four inches of lift so your cargo may not be directly in front of the exhaust of your 2013 BMW X3 anymore. Normally an extension would reduce the tongue weight capacity, but by using one that has a ball mount we can avoid that. I've added a video review of this product for you to take a look at.
view full answer...
- Availability of Adapter that Can Raise Hitch Opening Higher without Cutting CapacityThe D210 is the only option that accomplishes what you are interested in doing and does not cut the hitch capacity by 50 percent so that is why we recommend it so much.
view full answer... - Dual Hitch Accessory For Carrying Bike Rack and Towing TrailerInstead of the MT70070 I have a much better solution that would be ideal for you. The part # D210 has a hitch opening on the top for an accessory like a bike rack and then has a ball mount platform on the bottom. Since this isn't a hitch adapter you don't end up losing hitch capacity.
view full answer... - Dimensions of Multipurpose Ball Mount with 2 Inch Receiver for Bike Racks and Cargo Carriers # D210There is a detailed drawing of the Curt Multipurpose Ball Mount, # D210, on the product page. It is the third picture. I have also included a link to it below. The bottom of the receiver portion is 4-3/4 inches from the top of the shank. The center of the hitch pin hole on the receiver to the center of the ball hole measures about 4-1/4 inches.
view full answer... - Does the Curt Multipurpose Ball Mount part # D210 Reduce Tongue Weight Capacity of HitchIf you use only the top hitch opening of the Curt dual ball mount part # D210 with a hitch accessory the capacity is cut by 50 percent. If you use the ball mount portion of the adapter though the capacity is not cut.
view full answer... - Will The Curt Dual Receiver Allow The Rear Door With Spare Tire Open On A 2007 Toyota FJ CruiserThe Curt Multipurpose Ball Mount with 2 Inch Receiver # D210 will mount on to your 2007 Toyota FJ Cruiser as long as you have a hitch with a 2x2 inch opening. However, it looks like there will be a clearance issue when trying to open the rear hatch door with the mounted spare tire. An employee here at etrailer.com has the same vehicle with a hitch. I measured the distance from the hitch to the spare and found that the if you used the Curt ball mount # D210 you will not be able to open...
view full answer... - Is a Towing Cargo Carrier Available?We do not offer a cargo carrier which has a ballmount on it. Placing a ballmount as much as 3 feet rearward of the hitch receiver, due to the leverage involved, would considerably lower your hitch tongue weight capacity. A better option would be to use a ballmount with an integrated receiver, such as our Curt Trailer Hitch Ball mount with 2" Receiver for Bike Racks or Cargo Carriers, part number D210. This versatile item would allow you to use a cargo carrier, while towing your small...
view full answer... - Will the Curt Multipurpose Ball Mount, # D210 Fit on a 2012 Toyota Sienna SETo determine if the Curt Multipurpose Ball Mount, # D210, will work in the 2 inch receiver hitch on your 2012 Toyota Sienna SE, you will need to measure from the center of the hitch pin hole on your trailer hitch to the farthest back part of the rear bumper fascia. Standing a yard stick up at the back of the vehicle touching the rear fascia and measuring to the center of the hitch pin hole is an easy way to get this measurement. The # D210 ball mount measures 5-1/2 inches from the center...
view full answer...
- Availability of Dual Hitch Adapter that Has Tongue Weight of 500 lbsThe Curt # D210 is a dual hitch option that has a tongue weight rating of 750 lbs. This is going to be the best option we have. Basically this has a ball mount platform on bottom and then a hitch tube mounted above it.
view full answer... - Compatibility of Platform Bike Rack and Trailer Using Curt Multipurpose Ball Mount with ReceiverYour 2015 Honda CR-V has the Reese Towpower 97209 which has a tongue weight rating of 350 lbs. When using the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210, the hitch receiver's tongue weight capacity is not impacted if you are using the hitch ball and the accessory at the same time, so you won't have any issue with your trailer and 1Up 2 bike rack. When using just the bike rack without a trailer and using the # D210, the hitch tongue...
view full answer... - Will Curt Mulitpurpose Ball Mount fit a 2009 Chevrolet TraverseThis ball mount requires a hitch with a 2 inch receiver opening, so make sure you have a 2 inch opening on your Traverse. To make sure the top receiver clears your bumper, measure from the hitch pin hole straight out to see how far out the bumper sticks. As long as this measurement is less than 5 inches, the Curt D210 should fit.
view full answer... - How to Know if a Curt D210 Would Allow for Towing a Boat Trailer and Carrying Bike RackIf you have a pretty long straight-tongue coupler on your boat the # D210 should work well for you. The only way to know for sure would be to measure from the hitch opening of the hitch on your vehicle out to the furthest point out on the bike rack when installed in your hitch and then measure the height above the hitch opening the rack sits and then compare those measurements to your boat trailer. The # D210 will add about 3-1/2 inches to the height of the rack over the trailer so you...
view full answer... - Can the Curt Multipurpose Ball Mount, # D210, be Used on 2012 Honda OdysseyProvided that your 2012 Honda Odyssey has a 2 inch trailer hitch receiver, you can use the Curt ball mount, # D210. It was designed to carry an accessory like a bike rack while towing a trailer. The receiver part of the ball mount has a tongue weight capacity of 350 pounds. The combined weight of the bike rack and bikes cannot exceed 350 pounds. The entire ball mount has a tongue weight capacity of 750 pounds. So the combined weight of the bike rack, bikes, and trailer tongue weight cannot...
view full answer... - What is the Tongue Weight Specification on Curt Multipurpose Ball Mount When Using Only ReceiverI can see why this might be confusing! When using the Curt Multipurpose Ball Mount # D210 to carry only a hitch mounted accessory in the top receiver and no towing load on the ball mount, the tongue weight capacity of the hitch on your 2021 Grand Cherokee will be reduced by 50%. If you're towing a trailer and also using the upper receiver on the # D210, that won't apply since the load is also being applied to the ball mount and hitch ball. So- let's say your 2021 Jeep Grand Cherokee has...
view full answer... - Why Would Adding Cargo Carrier to Rear of Pop Up Trailer Cause it to Start SwayingThe reason you are experiencing sway now is because of the additional weight behind the rear axle of the pop up which is causing the tongue weight to lighten up. A sway control unit isn't going to prevent that type of sway. Aside from the fact that what you have fabricated is untested and therefor unknown whether or not it's safe, you have to come up with a way to increase the tongue weight so that it's between 10 and 15 percent of the total weight of the trailer.
view full answer... - Hitch Adapter Recommendation for Adding Height to 2 inch Hitch OpeningProbably our best option for you will be the Curt hitch adapter part # D210 which has a second hitch opening above the shank which is right at 3-1/2 inches taller. Most adapters similar to this cut the capacity of the hitch they are installed in by 50 percent but this one does not have that same restriction.
view full answer... - How to Determine the Right Rise/Drop Ball Mount Needed to Tow a Trailer LevelTo determine the correct rise or drop needed to tow the trailer level, you will need to take a couple of measurements. First take the truck and trailer to a place where the ground is flat and level. Then uncouple the trailer. Measure from the ground to the top of the receiver opening on the truck. Then, use the trailer jack to make the trailer level/parallel with the ground. Measure from the ground to the bottom of the coupler. If the trailer is taller the difference in the measurements...
view full answer... - Ball Mount with Drop Recommendation and Hitch Opening for Bike RackThe closest thing we have to what you mentioned is the Curt multi-purpose ball mount part # D210 which has a hitch opening up above for mounting a bike rack. But we do not have anything that can do a 4 inch drop as well.
view full answer...
- Availability of Hitch Adapter that Has Higher Hitch Opening without Cutting CapacityThe only solution we offer that is very similar to a dual hitch adapter that does not cut the capacity of the hitch at all is the Curt # D210 which gives you a second hitch opening higher than the ball mount platform below it. I attached a picture that has the dimensions of this adapter as well as a review video.
view full answer...
- Will Curt Multipurpose Ball Mount # D210 Fit on OEM Hitch on 2015 Honda PilotBased on my research, the 2015 Honda Pilot has an OEM 2 inch Class III Trailer Hitch so the Curt Multipurpose Ball Mount # D210 would be a great fit for your Pilot. This ball mount only reduces the tongue weight capacity of your OEM trailer hitch when only the receiver portion is used. If you are using an accessory and towing, then the tongue weight is not reduced and the weight of the accessory should be added to the total tongue weight. The ball mount has a tongue weight capacity of...
view full answer... - Can the Upper Portion of the Curt Ball Mounts # D210 be Used to Mount a WinchThe upper portion of the Curt Ball Mounts # D210 is only rated for use with accessories like bike racks or cargo carriers and only has a tongue weight capacity of 350 lbs. You would not be able to use the upper portion to mount a winch and pull a vehicle up on to the trailer. Your best option would be to install a winch plate on the trailer that directly attaches to the frame of the trailer.
view full answer... - Can Curt MultiPurpose Ball Mount D210 Fit Class IV Hitch of 2018 Ford F-150A Class IV trailer hitch for a 2018 Ford F-150 would have a 2 inch opening which is what the Curt Multipurpose Ball Mount # D210 is designed to fit so yes this would work well for you.
view full answer... - Is The Curt BallMount # D210 Rated High Enough To Haul 2 E-Bikes And Tow an 1,800lb Trailer Yes, any weight added to the Curt Multipurpose Ball Mount # D210 will need to be considered towards your tongue weight. We typically figure around 10-15% of the trailer's GTW for tongue weight so you'd have roughly 200lbs plus the 150lbs from the bikes/rack for a rough total of 350lbs. The Curt # D210 has a tongue weight capacity of 750lbs so you well within its capacity, but you should still check the capacity of your Santa Fe and the trailer hitch's capacity to ensure you're not overloading...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Installed by:
Andrew K
Installed by:
Cole B
Installed by:
Shane T
Video by:
Joshua S
Video by:
Dustin K
Updated by:
Rachael H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Debbie
4/22/2022
Excellent. This has been an awesome product.