View Cart

Buick Enclave Trailer Wiring

Select Vehicle Year

  
Trailer Wiring

Available Years for Buick Enclave Trailer Wiring


Trailer Wiring Harness

Make installing your trailer wiring harness as easy as possible with a custom fit wiring harness. Trailer wiring from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, and Hopkins eliminates or reduces the need to cut and splice wires. It also helps to protect your vehicle's sensitive electronics from mis-wired trailers.

Choose the year of your vehicle to the left to find a custom fit trailer wiring harness.




Wiring Adapter Fitguide



Trailer Connectors and Adapters



Wire and Wiring Accessories



Trailer Wiring Manufacturers



Search For Custom Fit Buick Enclave Accessories
Select A Category Below



Buick Enclave Custom Fit Vehicle Wiring Videos

Tekonsha T-One Trailer Wiring Harness Installation - 2016 Buick Enclave

Rob: Rob here at etrailer.com, and today we're going to be taking a look at the T-One vehicle wiring harness for factory tow package on our 2016 Buick Enclave.Now our wiring should provide us with all the lights we need to get down the road safely when we're towing our trailer. It's going to provide us the four-pole flat trailer connector and give us our brake lights, our turn signals, and our taillights.Everybody knows you need lights to legally take a trailer down the road so you don't get pulled over, you don't have a ticket. But there's a really big safety aspect to it as well. We don't want anybody running into the back of us because we don't have lights on our trailer. Or if we're changing lanes, we want to make sure that everybody knows exactly what's going on so we can all be safe.Now since our wiring is for the factory tow package on our Buick, it's going to make the installation that much easier. If we didn't have the factory tow package, it would involve a lot more work.



Tekonsha T-One Trailer Wiring Harness Installation - 2015 Buick Enclave

Hi there Buick owners. Today on our 2015 Buick Enclave we're going to be installing Tekonsha's T-One 4-Pole Flat Trailer Vehicle Wiring Harness. This 4-pole vehicle wiring harness is going to provide you with all the necessary lighting that you need for hauling your trailer. This includes your left turn signal, right turn signal, tail lamps and brake lamps and it will keep you DOT compliant in all states.The harness is going to plug right into your factory connector located at the back of the vehicle. And it is circuit protected using the fuse box located in your engine compartment. The kit comes with all the fuses and relays that you'll need to get this up and running.It will provide plenty of power for a medium to small size trailer as well as your cargo carriers that you may be using in the back.



Best 2012 Buick Enclave Trailer Wiring Options

Speaker 1: Today you're going to be taking a look at the best wiring options for your 2012 Buick Enclave. For your Enclave doesn't have the factory tow package, we're going to have a few different options for that. Over here we're going to have the CURT T-Connector wiring harness. Next to that we're going to have the Tekonsha wiring harness. Then finally over here we're going to have the Hopkins wiring harness.Now obviously they're all going to look a little bit different but the end result is going to give us a four-pole flat trailer connector that's going to provide all the lights to our trailer and safely get down the road.With our Tekonsha and our CURT, you can see they're going to look very similar. Really the main difference here is going to be the color of the wire.



Best 2009 Buick Enclave Trailer Wiring Options

Speaker 1: Today you're going to be taking a look at the best wiring options for your 2009 Buick Enclave. For your Enclave doesn't have the factory tow package, we're going to have a few different options for that. Over here we're going to have the CURT T-Connector wiring harness. Next to that we're going to have the Tekonsha wiring harness. Then finally over here we're going to have the Hopkins wiring harness.Now obviously they're all going to look a little bit different but the end result is going to give us a four-pole flat trailer connector that's going to provide all the lights to our trailer and safely get down the road.With our Tekonsha and our CURT, you can see they're going to look very similar. Really the main difference here is going to be the color of the wire.



Best 2010 Buick Enclave Trailer Wiring Options

Speaker 1: Today you're going to be taking a look at the best wiring options for your 2010 Buick Enclave. For your Enclave doesn't have the factory tow package, we're going to have a few different options for that. Over here we're going to have the CURT T-Connector wiring harness. Next to that we're going to have the Tekonsha wiring harness. Then finally over here we're going to have the Hopkins wiring harness.Now obviously they're all going to look a little bit different but the end result is going to give us a four-pole flat trailer connector that's going to provide all the lights to our trailer and safely get down the road.With our Tekonsha and our CURT, you can see they're going to look very similar. Really the main difference here is going to be the color of the wire.



Best 2011 Buick Enclave Trailer Wiring Options

Speaker 1: Today we're going to be taking a look at the best wiring options for your 2011 Buick Enclave.If your Enclave doesn't have the factory tow package, we're gonna have a few different options for that. Over here we're gonna have the Curt T-connecting wiring harness, next to that we're gonna have the Tekonsha wiring harness, and then finally over here, we're gonna have the Hopkins wiring harness. Now obviously, they're all gonna look a little bit different, but the end result is gonna give us a 4-pole flat trailer connector so it will provide all the lights to our trailer and get safely get down the road.So with our Tekonsha and our Curt, you can see they're gonna look very similar. Really the main difference here is gonna be the color of the wire, but each one of them is gonna have a T-connector that's gonna plug in behind the vehicle's taillight. It's gonna have one end of the plug from the harness from our vehicle and then the other end's gonna plug directly into the taillights. So this is just gonna be like an in-line circuit, so our taillights will still work, but there's also going to be power going out to our connector.Both of these are going to be an extremely easy installation.



Best 2008 Buick Enclave Trailer Wiring Options

Speaker 1: Today you're going to be taking a look at the best wiring options for your 2008 Buick Enclave. For your Enclave doesn't have the factory tow package, we're going to have a few different options for that. Over here we're going to have the CURT T-Connector wiring harness. Next to that we're going to have the Tekonsha wiring harness. Then finally over here we're going to have the Hopkins wiring harness.Now obviously they're all going to look a little bit different but the end result is going to give us a four-pole flat trailer connector that's going to provide all the lights to our trailer and safely get down the road.With our Tekonsha and our CURT, you can see they're going to look very similar. Really the main difference here is going to be the color of the wire.



Curt T-Connector Vehicle Wiring Harness Installation - 2018 Buick Enclave

Speaker 1: Today in this 2018 Buick Enclave we'll be having a look at and showing you how to install the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector. Part number C56393.Here's what our wiring looks like installed. Now the reason you're gonna want a seven way wiring harness like this one is that this will give you the basic lighting functions that are required by law in order for you to safely tow a trailer legally. You'll have your turn signals, your tail lights, your running lights, your brake lights, all of that. Additionally you'll get a constant 12 volt outlet power source to charge any trailer batteries or to run any 12 volt accessories on the trailer. You will also have the ability to have reverse lights in your trailer, or if you're towing a boat trailer and you have an electric solenoid that cuts off the brakes for your surge brakes, you'll be able to run that properly.



Trailer Wiring Harness Installation - 2010 Buick Enclave

Today on our 2010 Buick Enclave we'll be taking a look at and installing a Curt T connector vehicle wiring harness with 4-pole, flat trailer connector, part number C56027. Now we're going to go ahead and test out our wiring. Go ahead and remove the cover, we'll hook up our ground, and then we're going to test out our running lights first which will be that brown wire. Running lights off. Now left turn signal, yellow wire, off, and passenger side, the green wire. Brakes, we'll get that constant signal on both our green, and our yellow. All right, our wires look good. First thing we'll do, go ahead and lift up that rear hatch to gain access to our taillight assemblies.



Trailer Wiring Harness Installation - 2014 Buick Enclave

Today, on our 2014 Buick Enclave, we're going to take a look at, and show you how to install, the Curt T-Connector Vehicle Wiring Harness for factory tow packages. Now the first step in our install, what we're going to do is come up just to the outside of the passenger side tail pipe here. If we reach directly in between the outside body and the steel body, right up here, we're going to find our connector. Now, because it's hard to see underneath we'll show you out here. It's going to be located about right here in this area, so you just have to reach up in there. I'm going to take my trim panel removal tool and try to take out that Christmas tree fastener. You could use a trim panel tool.



Trailer Wiring Harness Installation - 2008 Buick Enclave

Today on this 2008 Buick Enclave, we're going to install part number 118450 from TowReady, the T1 Vehicle Wiring Harness. To start off our install, we're going to need to open up the back hatch so we can remove the taillights. Once we get access to the taillights, we need to remove 2 screws.They're hidden behind 2 covers. We'll go ahead and pop the covers loose, and then remove the screws. In this case we're using the 7mm socket. Once the screws are removed, we'll go ahead and pull back the taillight.



Trailer Wiring Harness Installation - 2012 Buick Enclave

Today on our 2012 Buick Enclave, we'll be installing the Tow Ready T1 Vehicle Wiring Harness with 4-Pole flat connector, part number 118450. Now to begin our install we'll need to open up the rear hatch. Then we'll move over to the taillight assembly where we'll need to remove the two fasteners that secure the taillight assembly. To remove the fasteners, we'll remove the protective caps first and then the fasteners underneath. Once we remove the fasteners, we'll go ahead and pop the taillight assembly out being careful not to break the alignment pin underneath. Then we'll go ahead and remove the manufacturer's connector from the back of the taillight. We'll press on the locking tab and separate the two connectors.



Trailer Wiring Harness Installation - 2013 Buick Enclave

Today on our 2013 Buick Conclave, we'll be installing the Tow Ready, T1 Vehicle Wiring Harness, part number 118579. To begin our installation on the vehicle wiring harness, we'll need to raise the rear hatch of the vehicle. We'll need to remove each of the taillight assemblies. To do this, we'll need to remove two covers that cover up small bolts on each side. You'll see that there's a bolt under each cover. We'll need to remove each of these bolts. Once these two have been removed, we can gently slide the whole light assembly out towards the rear of the vehicle.



Trailer Wiring Harness Installation - 2013 Buick Enclave

Today on this 2013 Buick Enclave, we're going to install part number 119147KIT from Tow Ready. First thing we need to do is go ahead and open up the back hatch and get access to the tail lights. Then, we need to remove two plastic covers for the screws. You can pry them just a little bit and they simply pop off. Once we have access to the screws, we'll go ahead and unbolt the tail light. With the screws removed we'll go ahead and gently pull the tail light out backwards and away from the body work.



Trailer Wiring Harness Installation- 2010 Buick Enclave

Today on this 2010 Buick Enclave we are going to be installing wiring harness part number 118450. We are at the rear cargo area of the Enclave, and we are going to locate the ports that we are going to be plugging our wiring harness into. These ports are actually located directly behind the tail light assembly on both the driver and passenger side. So, the first thing we want to do is remove both tail light assemblies. To do that we are going to open up the rear cargo door, there are two inboard screws holding the tail light into place. We need to pull back the covers to expose those. :30



Trailer Wiring Harness Installation - 2009 Buick Enclave

Today on this 2009 Buick Enclave we will be installing wiring harness part number 118450. The connection points for our wiring harness are located directly behind the tail light assemblies on both of the drivers and passengers sides. So the first thing we need to do is go ahead and remove both of those. And that will expose the two screws that are holding the tail light onto the vehicle. We will go ahead and remove those. We will just gently pull away the tail light connector that we are going to be connecting our harness into located right here. We want to go ahead and press the tab here at the top of the connector. And that will allow us to pull the two pieces apart. I am going to set the tail light aside for the time being. We will take the harness here and we will start with the connectors that have the yellow and brown wires on it.