GMC Sierra Camper Tie-Downs

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

It sure is Michael! The TorkLift item #TL87DR includes both front and rear tie-downs for your 2024 Ford F-350 with a 8' bed. Please note that the item #TL87DR are not compatible with factory flip-out steps that are mounted under the bed. What…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Hello Joeseppi, Let's get you into the right camper tie-down. Just as long as your 2021 Ford F-350 does not have factory flip-out steps that are mounted under the bed you will want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear…

Hey Keith! The TorkLift Talon Truck Camper Tie-Downs item #TL25SV combo will fit your 2025 Ford F-350 if your truck has the TorkLift SuperHitch Magnum 30k item #TL27CR installed. If you have the factory hitch or an aftermarket hitch you'll need…

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

Hey Dan, yes the rear tie downs that come with the Torklift Tie Down set part #TL34VV do bolt to the trailer hitch at the rear of the truck. I attached a picture that shows our installer bolting it in that area.

Hey David thanks for the information! For a 2025 Ford F-250 with a 6 3/4" bed, you'll want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear item #TL63PR. This kit comes with the Front TorkLift Camper Tie-Downs item #TL77CR and…