Keep the capacity, lose the clunk. This anti-rattle collar helps quiet ball mounts, racks, and carriers in your 2-1/2" receiver, while the included reducer keeps your 2" gear from collecting dust in the garage.Features to know about Stops the Rattle on Your Hitch-Mounted Gear A 2-1/2" receiver gives you the capacity you need for bigger towing and hauling setups, but your ball mount, bike rack, cargo carrier, or other hitch-mounted gear can still rattle around. This anti-rattle collar presses against your accessory to help cut down on play, clunking, and movement. Includes a Reducer for Your 2" Accessories The included reducer lets you use your 2" ball mounts and hitch-mounted accessories in a 2-1/2" receiver, so the gear you already own doesn't get left behind.
We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.Some OE hitches have tolerances that will not allow for the use of this anti-rattle collar.
Use this anti-rattle clamp to keep your hitch-mounted accessory from rattling and wobbling in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. ... Features: Anti-rattle clamp keeps hitch-mounted accessories stable and quiet Helps to reduce or eliminate wobble and sway within your hitch receiver Ideal for cargo carriers, bike racks, and similar hitch-mounted accessories Effortless, bolt-on installation Place stabilizer plate over the top collar of your hitch receiver, making sure the bent portion rests on the shank of your accessory Insert the U-bolt from the bottom side, positioning it at the front of the collar Tighten nuts and washers, using included wrench Strong, durable steel construction with vinyl coating Black powder coated plate resists corrosion Application: 2" x 2" receivers Hitch receiver must have a ring or collar around it for U-bolt to attach Warning/Note: Not for use with receiver tube extentions.
If you have any gear with a 2" D-shaped hitch pin receiver this handy hitch lock will secure it to the back of your ride and eliminate noisy rattle. Can be keyed alike to match other locks.Features: Trailer hitch receiver lock is used in place of a standard pin and clip to prevent theft of your 2" hitch accessory Designed for use with Benton D-shaped hitch pin receivers Anti-rattle pin reduces play and vibration in the hitch connection Pick-proof screw-and-lock mechanism provides security Rubber end and textured lock core make it easy to grip Plastic cap covers key slot to help prevent internal corrosion 2 Reversible, automotive-style keys included Locks can be keyed-alike to match other locks Select "Keyed Alike" from drop down menu above and enter number of locks into Quantity box Specs: Application: hitch accessories with D-shaped hitch pins that fit 2" x 2" trailer hitch receivers Designed to fit Benton products Pin diameter: 5/8" Inside pin length (span): 2-5/8" Overall length: 5-1/2" With lock: 6-5/8" Bolt thread size: M12 x 1.5 Limited lifetime warranty
Keyed alike lock set includes D-shaped anti-rattle hitch lock to secure your 2" hitch-mounted bike rack to your hitch and a 10' cable lock to secure your bike to the rack.Features: D-shaped hitch receiver lock is used in place of a standard pin and clip to prevent theft of your 2" hitch bike rack Anti-rattle pin reduces play and vibration in the hitch connection Cable lock secures your gear to your bike rack Heavy-duty steel cable is strong and difficult to cut Vinyl coating keeps the steel cable from scratching your gear and protects against corrosion Pick-proof screw-and-lock mechanisms provides security Textured lock cores makes it easy to grip locks Plastic cap covers key slots to help prevent internal corrosion Black powder coat finish on all locks is rust resistant Locks are keyed alike 2 Reversible, automotive-style keys included Made in the USA Specs: Application: bike racks that fit 2" x 2" trailer hitch receivers Hitch pin dimensions: Pin diameter: 5/8" Inside pin length: 2-5/8" Overall length with lock: 6-5/8" Cable length: 10" Cable diameter: 5/16" 1-Year warranty
Secure your etrailer cargo carrier with a threaded hitch pin to your vehicle and limit rattling and noise of the carrier in your hitch with this threaded hitch lock. Can be keyed alike to match other etrailer locks.Features: Trailer hitch receiver lock is used in place of a standard pin and clip to prevent theft of your etrailer cargo carrier Works with e98872, e98873, e98875, and e98991 carriers with threaded hitch pins Anti-rattle pin reduces play and vibration in the hitch connection Pick-proof screw-and-lock mechanism provides security Rubber end and textured lock core make it easy to grip Plastic cap covers key slot to help prevent internal corrosion 2 Reversible, automotive-style keys included Locks can be keyed-alike to match other etrailer locks Select "Keyed Alike" from drop down menu above and enter number of locks into Quantity box Made in the USA Specs: Application: etrailer cargo carriers with threaded hitch pins that fit 2" x 2" trailer hitch receivers Pin diameter: 5/8" Inside pin length (span): 2-5/8" Overall length: 6-1/2" Bolt thread size: M16 x 2 Limited lifetime warranty Note: This hitch pin is designed for use with cargo carriers only.
Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…
There sure is Steve and welcome back! To stop clunking and movement on a ball mount or accessory, I recommend our etrailer Anti-Rattle Hitch Collar for 2.5" hitch receivers item #e55YV or item #e38FV for 2" hitch receivers. These collars…
Hey Rogelio, thanks for reaching out. It is totally fine to use a no-drill bracket like part 18140 on a hitch with a square crosstube. People do it all the time and it works out fine. It's basically a hose clamp and once you tighten it, it can…
This is a great choice Joe and thanks for reaching out! Weigh Safe True Tow Weight Distribution Hitch #WS49MR would be a good match for your setup. Since your Grand Design toy hauler will have a loaded tongue weight between 1,300 and 1,600 lbs, this…
Welcome back Jeff and congrats on the new motorhome! To use your Blue Ox Avail Tow Bar item #BLU28QV in your motorhome's 2-1/2" hitch, I recommend our etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers item #e55YV. The etrailer…
Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…
Hi Dan! I have a couple potentially dumb questions. Are you sure you have a 1.5" hitch receiver? Was that measured at the inside or outside of the hitch opening? And if it is truly 1.5" for the inside of the receiver, what is this hitch on?…
Hi Jeff; when you replace your fenders you want to do your best to match the dimensions of the existing fenders. Even if they were replaced at some point, that is the way to go about it. Do you know the length of your current fenders? The Tandem Axle…
For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…
Hey Mark! You can definitely leave the etrailer Anti-Rattle Hitch Collar #e38FV installed on your receiver. That is one of the best parts about it, it can stay on the hitch so its always ready to go. The knob doesn't have to be tightened down,…
Hey Robert, we actually have a lock that was made for locking A-60 couplers like the part #T4845000 that you referenced with the InfiniteRule part #IR82FR. This is a pin lock that fits through the hole just behind the coupler portion that attaches to…
First you will want to connect an 18 gauge wire to the Temp Sender mounted on your vehicle. You will then route the wire through the firewall into the passenger compartment where the Temperature Gauge is mounted and attach the Temp Sender wire to the…
Use this hitch immobilizer to keep your ball mount or hitch-mounted accessory from rattling and shifting in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple, bolt-on installation.
Malone anti-rattle hitch clamp stops movement and eliminates wobble between your vehicle's receiver and ball mount. Included bracket plate, U-bolt, and nuts easily install on your receiver. ... Features: Anti-rattle hitch clamp stops movement and eliminates wobble between your vehicle's receiver and ball mount Included bracket plate, U-bolt, and nuts easily install on your hitch receiver Heavy duty steel construction is corrosion resistant Specs: Application: Class II 1-1/4" and 2" hitch receivers 5-Year warranty
This anti-rattle hitch pin dramatically reduces any movement or vibration of your ball mount in your hitch. Included lock ensures security for your hitch accessory. ... Slide your ball mount into your hitch and insert the hitch pin. To activate the anti-rattle device, just twist the pin with a wrench (sold separately) to tighten it down. Doing this will pull the accessory up against the wall of your hitch receiver, thus keeping the accessory from moving around inside your hitch.
This anti-rattle clamp lets you enjoy your ride without the soundtrack of a loose ball mount. It provides a snug, quiet fit for gear that fits a 2" hitch. ...
This anti-rattle clamp lets you enjoy your ride without the soundtrack of a loose ball mount. It provides a snug, quiet fit for gear that fits a 2-1/2" hitch. ...
This anti-rattle hitch pin dramatically reduces any movement or vibration of your ball mount in your hitch. Included lock ensures security for your hitch accessory. ... Specs Application: 2" x 2" Trailer hitch receivers Designed for use with ball mounts or hitch accessories with hollow shanks Pin diameter: 5/8" Bolt Thread Size: 5/8"-11 Warranty 1-Year limited warranty Note: You will need a 15/16" or 1" wrench or socket (not included) to tighten the anti-rattle hitch bolt.
Keep your ball mount, tow bar, bike rack, cargo carrier, or other hitch-mounted accessory stable and rattle-free with this easy-to-use clamp. No tools needed, just tighten the clamp with the built-in lever and then pop it down to secure.Features: Anti-rattle clamp keeps hitch-mounted accessories stable and quiet Helps to reduce or eliminate wobble and sway within your hitch receiver Ideal for ball mounts, cargo carriers, bike racks, and other hitch-mounted accessories No-tool installation with easy-to-adjust lever Position clamp around collar of hitch and accessory shank Use built-in lever to crank clamp until tight Pop lever down to secure clamp in place Durable, high-strength steel and lightweight aluminum combine for maximum durability Clear finish provides corrosion resistance Limited lifetime warranty Specs: Application: 2-1/2" x 2-1/2" hitch receivers Hitch receiver must have a ring or collar and sufficient clearance between the ring or collar and the bumper Overall dimensions: 4-1/2" wide x 5" tall Inside dimensions: 3-3/4" wide x 2-7/8" tall
Use this anti-rattle device to keep your hitch-mounted accessory from rattling in your receiver. For use with 2" receivers. Slide over accessory's shank, insert shank into hitch receiver, then tighten down bolts.Features: Anti-rattle device keeps hitch-mounted accessory from making noise Deters rattle and sway inside your hitch receiver Works with ball mounts, tow bars, and hitch-mounted accessories such as bike racks and cargo carriers Fast, easy installation Slip clamp over accessory shank and insert shank into hitch receiver Tighten bolts to prohibit movement inside receiver Durable steel construction Black powder-coated finish resists corrosion Application: 2" x 2" hitch receivers Made in the USA
This secure anti-rattle hitch lock dramatically reduces movement and vibration in your towing setup. Extra-long pin fits wide 2-1/2" GM and 2" Toyota hitches. ... No more annoying clanking or vibrating. The 90 degree lock goes on the end of the anti-rattle pin to provide security for your hitch-mounted accessories. It swivels for easy access in tight spaces. Two rubber-coated, stainless steel keys are included with the lock.
This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories.The anti-rattle Silent Hitch Pin from Let's Go Aero takes the rattle and play out of the connection between your trailer hitch and your ball mount or hitch accessory.
... Corrosion-resistant, black powder coated ball mount measures 8-1/4" from center of hitch pin hole to center of ball hole. Includes anti-rattle kit.Features: Ball mount with ShockDrop hitch ball lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle Ball provides connection point for trailer coupler Integrated ShockDrop technology Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on tow vehicle's suspension and brakes for extended longevity Virtually maintenance-free with no airbags or bearings to service Fine threads on ball provide tight, strong grip Anti-swivel ball base is constructed of forged steel for dependable towing power Durable carbide black powder coat finish Corrosion-resistant chrome finish on ball Tested for safety to meet SAE J684 specifications High-gloss black powder coat finish on sturdy steel ball mount resists rust Anti-rattle kit stops rattling and prevents swaying of load Threaded pin allows bracket to be tightly installed Constructed from high-strength steel Protected by a durable yellow zinc-plated finish Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2" Shank dimensions: 2-1/8" long x 1" diameter Ball mount length: 8-1/4" from center of hitch pin hole to center of ball hole Drop: 3" from top of inside of hitch opening Rise: 2" Pin hole diameter: 5/8" Limited lifetime warranty Note: The hitch ball will sit 1-1/2" higher than a standard hitch ball due to the shock absorbing base.
Use this anti-rattle device to keep your hitch-mounted accessory from rattling in your receiver. For use with 2-1/2" receivers. Slide over accessory's shank, insert shank into hitch receiver, then tighten down bolt.Features: Anti-rattle device keeps your hitch-mounted accessory from making noise Deters rattle and sway inside your hitch receiver Works with ball mounts, tow bars, and hitch-mounted accessories such as bike racks and cargo carriers Fast, easy installation Slip clamp over accessory shank and insert shank into hitch receiver Position thicker side of spacer block (if needed) between the shank and the clamp block Tighten bolt to prohibit movement inside receiver Durable, plated steel construction Application: 2-1/2" x 2-1/2" hitch receivers Made in the USA Note: Not compatible with Tow & Stow ball mounts for MultiPro tailgates, reducer sleeves, or any weight distribution hitch.
Use this anti-rattle device to keep your hitch-mounted accessory from rattling in your receiver. For use with 2" receivers. Slide over accessory's shank, insert shank into hitch receiver, then tighten down bolt.Features: Anti-rattle device keeps your hitch-mounted accessory from making noise Deters rattle and sway inside your hitch receiver Works with ball mounts, tow bars, and hitch-mounted accessories such as bike racks and cargo carriers Fast, easy installation Slip clamp over accessory shank and insert shank into hitch receiver Position spacer block (if needed) on the thin side Tighten bolt to prohibit movement inside receiver Durable, plated steel construction Application: 2" x 2" hitch receivers Made in the USA Note: Not compatible with Tow & Stow ball mounts for MultiPro tailgates, reducer sleeves, or any weight distribution hitch.
This hitch lock lets you secure your Kuat Transfer to your 1-1/4" or 2" trailer hitch receiver. Threaded design helps to reduce movement and noise of the rack in your hitch. Not compatible with Transfer V2.Features: Locking hitch pin secures your Kuat Transfer bike rack to your 1-1/4" or 2" hitch Works with TS01B, TS02B, TS02G, TS02B-FB, TS02G-FB, TS03B, TS03G, TS03B-FB, and TS03G-FB racks manufactured before 2021 Not compatible with Transfer V2 Anti-rattle design helps reduce movement and noise of rack in hitch Tighten with 8-mm Allen wrench or 19-mm open box wrench (not included) Washer and lock washer included 90-Degree, barrel-style lock fits on end of hitch pin Simply push the lock onto pin until it snaps into place Weather-resistant rubber dust cap keeps cylinder free of debris 3 Round keys included Limited lifetime warranty Specs: Pin diameter: 3/8" Overall length: 5-3/4" Pin span: 3-1/2" Limited lifetime warranty
... Corrosion-resistant, black powder coated ball mount measures 9-1/4" from center of hitch pin hole to center of ball hole. Includes anti-rattle kit.Features: Ball mount with ShockDrop hitch ball lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle Ball provides connection point for trailer coupler Integrated ShockDrop technology Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on tow vehicle's suspension and brakes for extended longevity Virtually maintenance-free with no airbags or bearings to service Fine threads on ball provide tight, strong grip Anti-swivel ball base is constructed of forged steel for dependable towing power Durable carbide black powder coat finish Corrosion-resistant chrome finish on ball Tested for safety to meet SAE J684 specifications High-gloss black powder coat finish on sturdy steel ball mount resists rust Anti-rattle kit stops rattling and prevents swaying of load Threaded pin allows bracket to be tightly installed Constructed from high-strength steel Protected by a durable yellow zinc-plated finish Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2" Shank dimensions: 2-1/8" long x 1" diameter Ball mount length: 9-1/4" from center of hitch pin hole to center of ball hole Drop: 5" from top of inside of hitch opening Rise: 4" Pin hole diameter: 5/8" Limited lifetime warranty Note: The hitch ball will sit 1-1/2" higher than a standard hitch ball due to the shock absorbing base.
Designed for use with tow bars, this hitch extender moves your 2" receiver opening 7-3/4" out from your trailer hitch to provide clearance for rear-mounted accessories. Hitch bolt and pin act as an anti-rattle device. Rated at 10,000 lbs.Features: Extends trailer hitch receiver opening out from the rear of your motorhome to avoid obstacles Get extra clearance for your coach Reduces noise and movement with anti-rattle threaded hitch bolt and clip Constructed of durable steel Solid steel shank Resists corrosion with black powder coat finish Made in the USA Specs: Application: 2" x 2" hitch receivers Maximum gross trailer weight : 10,000 lbs Maximum tongue weight : 400 lbs Overall length: 12-1/2" long Distance from center of hitch pin hole to center of hitch pin hole: 7-3/4" Limited lifetime warranty Note: Using a hitch extender will reduce your hitch's overall capacity by 50 percent
Smart and effective way to eliminate rattle while carrying bikes or general towing. Easy to use design gets right to the heart of the problem--too much space between shank and receiver! This device works by keeping shank and receiver tight together.Features: Anti-Rattle Kit for 1-1/4" x 1-1/4" trailer hitches (Class I or Class II) Note: The shank of the ball mount, cargo carrier, bike rack etc. must be hollow.
Filters
