Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers - Keyed Alike

Ask the Experts about this etrailer Trailer Hitch Lock

• Recommended Locking Hitch Pin For Curt C18087 Platform Bike Rack
  I have a solution for you, but the etrailer # e99047 is not a confirmed fit on the Curt bike racks. Instead, we have confirmed that the The SportRack Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers - 1-1/4" and 2" Hitches # SR0901 is a confirmed fit for Curt racks, specifically the # C18087 and # C18030
  view full answer...
• Can etrailer Locking Hitch Pin be Used for Thule Bike Rack
  The etrailer Threaded Anti-Rattle Hitch Pin Lock # e99047 is an M16 bolt while the bolt that comes with the Thule Snug Tite Hitch Lock # THSTL2 is an M12, so even if the thread count was the same they wouldn't be compatible. If you're just needing to replace the bolt for your Thule bike rack then you can use part # 853-5917, otherwise if you need the lock and washers then you'll need the kit # THSTL2 instead.
  view full answer...
• Can I Put a Thule Lock Core into an etrailer Hitch Lock
  I may have a solution for you, but the lock cores on the etrailer hitch locks # e99047 are not going to be able to be replaced with a Thule lock core. Thule does make an anti-rattle locking hitch pin though that you might be able to make work; that can be found with the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 and is compatible with Thule hitch mounted accessories.
  view full answer...
• Anti-Rattle Hitch Pin/Lock For Rambo R184 Bike Rack
  I compared the dimensions of the pin you provided, and we don't sell a lock housing individually that would work with it. Your best bet would be to buy a locking pin/lock housing combo like # HE6001. I've provided a diagram of the pin dimensions for the # HE6001, they appear pretty close to your pin. If your pin has a 12 thread pitch (12 threads per inch) this lock/pin should work for you. I've linked to a product demonstration video for the # HE6001.
  view full answer...
• Yakima Backroad Bike Rack Hitch Lock
  You'll need to utilize the hitch bolt included with the rack, as it's the correct diameter and has the correct threaded portion length to be compatible with the threaded boss inside the bike rack shank. For the locking portion, use part # Y07235.
  view full answer...
• Does etrailer Threaded Hitch Pin Lock Fit Thule Bike Racks
  The Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers # e99047 uses an M16 bolt while the Thule bike racks fit with an M12 bolt so they unfortunately aren't compatible. This just means that you need to use the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 to fit your Thule bike rack. If you just need the bolt then that can be found as part # 853-5917.
  view full answer...
• Will The eTrailer Threaded Anti-Rattle Hitch Pin Lock Work With The Yakima Longarm Load Extender?
  Our Threaded Anti-Rattle Hitch Pin Lock # e99047 works great for many accessories that do not come with threaded locks, but whenever the product has a threaded lock designed just for it, I always go with that one. So since you're using the Yakima LongArm Truck Bed Load Extender # Y01149 you should get the Yakima HitchLock # Y07235 because it connects to the anti-rattle bold included with the Yakima LongArm Load Extender.
  view full answer...
• Can etrailer Hitch Lock be Ordered with all Same Key
  Yes, if you select "keyed alike" from the drop down menu before hitting add to cart on the product page for the anti rattle hitch pin part # e99047 they will all come using the same key number.
  view full answer...
• Anti-Rattle Hitch Lock that Can Fit 2-1/2 inch Trailer Hitch
  The best option for an anti-rattle hitch lock that fits a 2-1/2 inch hitch is the Lets Go Aero part # SHP2040-XL which has the added length you would need. The # e99047 is not long enough for your application.
  view full answer...
• Best Trailer Hitch, Cargo Carrier and Cargo Bag for 2018 Infiniti QX60
  We have all the best parts to add a hitch, cargo carrier and cargo bag to your 2018 Infiniti QX60, and let's start with the hitch. The best hitch for your 2018 Infiniti QX60 is the Draw-Tite Trailer Hitch Receiver # 76031 because it is has the most ground clearance and bumper clearance of any hitch for your car. This means your cargo carrier is going to be as high off the ground as it can be with this hitch over any other. I have added a photo and a link to a video install on an '18...
  view full answer...
• Best Hitch for Cargo Carrier and Bike Rack for 2020 Honda Odyssey
  The trailer hitch I recommend for your 2020 Honda Odyssey is the etrailer # e98855. The standard 2 inch receiver gives you the versatility to add just about any hitch mounted accessory, like your Thule bike rack as well as a cargo carrier. It is also very easy to install as it requires no drilling. While the etrailer hitch has a tongue weight capacity of 525 lbs, you're limited to the max tongue weight rating of your Odyssey (350 lbs according to your owner's manual). You can use...
  view full answer...
• Length of Shank on etrailer Cargo Carrier for Spare Tire Clearance of Jeep Cherokee
  From the center of the hitch pin hole to the closest edge of the 24x60 etrailer.com Cargo Carrier # e98874 when it is folded down is 19-1/2" so I'm pretty confident this will work in that orientation. You can measure from the center of your hitch pin hole out to the furthest edge of your spare and make sure that it's under 19-1/2" just to verify. When the carrier is folded up that reduces the clearance by 10" so from the center of the hitch pin hole to the carrier will be 9-1/2" and...
  view full answer...
• Lock for Hitch Mounted Cargo Carrier with Threaded Hitch Pin Hole
  You can use the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers for 2" Hitches # e99047. This will replace the anti-rattle bolt on the cargo carrier and provide security while still keeping things still and quiet. I linked a review video for you to check out.
  view full answer...
• Will etrailer 24x62 Folding Cargo Carrier Fit Inside RV Storage Compartment
  When the etrailer Cargo Carrier # e98872 is completely folded up for storage, it gets down to a pretty compact size of 32-1/4 inches long x 11-1/4 inches wide x 21-1/4 inches tall, so if the space inside your RV's storage compartment is at least that big, you're good to go. Since the size of RV storage compartments can vary, you'll just need to take a quick measurement to ensure there is enough space to store the carrier inside. If you find that your compartment is too small, you can...
  view full answer...
• Solution for Cross Threaded Anti-Rattle Hitch Bolt for etrailer Cargo Carrier e98874
  The thread pitch for the anti-rattle hitch bolt that is included with the etrailer Carco Carrier # e98874 is 16 mm x 2.00, standard thread. I went out and confirmed this myself using a thread pitch gauge. You could try re-threading the bolt, but since we do carry the bolt separately, it may be easier to just replace it. For that, you'll need part # e98911 or # e99047 for the locking version.
  view full answer...
• Replacement Anti-Rattle Hitch Pin Needed for the Folding 24x62 etrailer Cargo Carrier
  The anti-rattle pin for the Folding 24x62 etrailer Cargo Carrier for 2" Hitches # e98872 can be replaced with the Threaded Anti-Rattle Hitch Pin and Clip # e98910 or upgraded to the Lock for etrailer Cargo Carriers # e99047.
  view full answer...
• Tie Downs for Scooter on Cargo Carrier
  Your photo did not come through, but if you are sure your scooter will fit inside the 24x62 etrailer Cargo Carrier # e98872, I do have a suggestion for tie-downs. What I recommend are motorcycle tie-downs, as these will work with your scooter as well, the ShockStrap Ratchet Motorcycle Tie-Downs with Shock Absorbers # 297-7RSBB-M. This is a quantity of four straps and they are shock-absorbing to keep your scooter steady with constant tension so the straps won't come loose. I have added...
  view full answer...
• Trailer Hitch Needed for a 1992 Road Trek Van to Carry Cargo and Bikes
  Although we haven't performed an installation on a 1992 Road Trek Van, from what you are describing I believe that the Class III Max-Frame Trailer Hitch Receiver # 75140 will fit. If you check out the attached photos you can see that it installs directly to the frame and the crosstube sits below the bumper itself. If this does fit then I recommend using the etrailer.com Cargo Carrier # E98874 because it has tilting and folding functions, has a weight rating of 500 lbs, and comes with...
  view full answer...
• How To Determine If the 20x48 etrailer Off Road Cargo Carrier Will Clear The Hatch On a Vehicle
  I don't have the ability to determine compatibility of the 20x48 etrailer Off Road Cargo Carrier part # e98875 with any one particular vehicle unless we have tested this our self but the shank is long enough that it will clear the hatch on most applications. If you wanted to be certain you could measure using the distance from the center of the hitch pin hole on the carrier to the closest part which is 9". In regards to locking, the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo...
  view full answer...
• Will The eTrailer Trailer Hitch Receiver # e98853 Fit My 2015 Totyota Sienna SE?
  Yes, the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98853 will fit your 2015 Toyota Sienna. Here are some parts that I think would be great for your Sienna. Since you have the capabilities of carrying a lot of passengers, you will have a lot of cargo. I suggest grabbing the etrailer folding cargo carrier # e98872 because it can fit in the back of your Sienna when not in use, no problem. I like this because one time I went to the lake and the...
  view full answer...
• Recommended Chest Style Toolbox to Fit 24x60 Inch Hitch Mounted Cargo Carrier
  The inside dimension of the platform of the Surco # 52018 measures 24 x 60, just like the # DZ8560WB box you're asking about, but because of the radiused corners of the cargo tray, the box won't fit. However, the etrailer brand folding carrier, part # e98872 has an inside dimension of 24 x 62 with square corners, so the # DZ8560WB box will fit perfectly. The carrier has a 500 lb capacity, but you'll want to make sure that the 60 lb weight of the cargo tray, the approximately 60 lb weight...
  view full answer...
• Shank Thickness of etrailer.com Cargo Carrier
  The etrailer.com Cargo Carrier part # e98872 has a shank with 3/16" wall thickness. The etrailer.com Cargo Carrier is rated for up to 500 lbs so as long as you do not exceed this figure the side wall thickness should not be a problem or cause for concern. For a lock, you can use the etrailer.com Trailer Hitch Receiver Lock part # e99047.
  view full answer...
• What Size Bumper Will The etrailer RV Cargo Carrier Fit?
  Our 24x60 etrailer Cargo Carrier For RV Bumpers # e99049 will fit bumpers with 4" to 4-1/2" tall by 4" Wide. If it fits your bumper you may as well grab the 24" Extension for etrailer Bumper Mounted RV Cargo Carrier Item # e99052 to gain 24" more space! I've included a video of AJ reviewing the carrier so check it out! If your rear bumper on your 2016 Thor ACE Motorhome isn't within those measurements we have other options. If you have a 2" hitch receiver you can use the 24x60 etrailer...
  view full answer...
• Can Draw Tite Hitch for 2007 Honda CR-V Carry Motorcycle Carrier
  The Draw Tite hitch part # 75547 has plenty of tongue weight capacity for carrying a motorcycle carrier. It has a 675 lb tongue weight capacity. If you are in need of a carrier we have the etrailer carrier part # e98873 which has a 500 lb weight capacity, has plenty of tie down anchor points, and comes with a ramp for easy loading. I attached a review video for more info as well. For a lock then you might want the # e99047 as well. Then for a cushioned tie down set the part # SS6-SL14...
  view full answer...
• 2020 Mercedes GLE450 With Or Without Active Curve System Hitch Compatibility
  Yes, Item # 76141 will fit if you do not have the Active Curve System. The system has to do with your suspension and how the car rides. If you are not sure if you have the Active Curve System, call your dealer to make sure before purchasing. If you do have the Active Curve System, we will not have a hitch that will work at this time. When you do buy a hitch, I use a cargo carrier quite often and our folding cargo carrier # e98872 is awesome because it has plenty of room to load up all...
  view full answer...
• Will etrailer.com Cargo Carrier Fit 2016 Subaru Crosstrek
  The etrailer.com Cargo Carrier for 2" Hitches # e98872 will definitely fit and work well on your 2016 Subaru Crosstrek. This is because when we test fit a trailer hitch on a 2016 Crosstrek, the Curt Trailer Hitch # C13135, there was 2-1/2 inches from the hitch pin hole to the edge of the bumper, while this cargo carrier measures 18-1/2 inches from the hitch pin hole to the closest part of the carrier hen it is folded down, and 11-1/2 inches when folded up. What this means is that you are...
  view full answer...
• Does etrailer Cargo carrier e98874 Include Hitch Lock
  The etrailer cargo carrier part # e98874 comes with an anti-rattle hitch pin but does not have a lock that comes with it. For that you'd also want the part # e99047 and you'd be set.
  view full answer...
• Trailer Hitch and Cargo Carrier Recommendation for a 2013 Nissan Juke
  We do have trailer hitches and hitch mount cargo carriers that are compatible with your 2013 Nissan Juke. If you have the AWD model I recommend the Draw-Tite # 24867 but if you have the FWD model than I recommend the Draw-Tite # 24892. I like the Draw-Tite over the Curt for your application because Curt requires the stabilizer strap # 18050 be used with a cargo carrier. Although it doesn't hurt anything (and can be beneficial) it isn't required by Draw-Tite. Then for a cargo carrier...
  view full answer...
• Is Threaded Hitch Pin Lock Reliable for etrailer Motorcycle Carrier
  I can understand your skepticism based on your previous experience with a threaded hitch pin, but I can tell you that I have not heard of any general reliability options with the use of threaded hitch pins in general or specifically with the use of the etrailer Motorcycle Carrier with Ramp for 2" Hitches # e98873. The same holds true of the lock for this carrier, the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers for 2" Hitches # e99047. I am completely confident...
  view full answer...
• Front Mounted Trailer Hitch Combatibility with 2017 Ford F-150 Gen 2 Raptor
  The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31083 is a fit for the 2017 Ford F-150 Raptor frame according to Curt. Because it mounts to the outside of the frame, the front skid plate can be kept but it will need to be trimmed if you choose to reinstall it. I've attached the installation details to assist with the mounting locations. For the aluminum basket you referenced, I recommend the 60x22 etrailer Cargo Carrier for 2" Hitches - Aluminum - 500 lbs # e98991....
  view full answer...

Do you have a question about this Trailer Hitch Lock?