Checking Out the etrailer Anti-Rattle Locking Hitch Pin Video

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

Hello Joseph, yes there is! What you are looking for is the Anti-Rattle Hitch Lock and Cable Lock for 2" Hitch Mounted Bike Racks #e88RV. This will work with the Benton Bike Rack #B54VR, as well as the #B94FR and #B54FR so that the bike and rack…

Hi Dick; the Benton LittleShift Bike Rack #B54VR cannot be used on an RV, trailer, or towed vehicle. Trailer rated bike racks are pretty limited, so you would have to use a 2-bike rack like the #KU84FR if you want to put it on the trailer towed…

Hi Daylen; all of our wheels are going to have zero offset since they're designed for trailers. I'm not sure if you need pure black or if black and silver will also work so I have a variety of options for you. The following wheels are all…

Hey Heather, unfortunately the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set #3794DAT is keyed unique so it's not available to be keyed alike. Instead, you'd have to use something like the Master Lock Set #ML44VR which come…

Hi Steve; the Aluminum Eagle Trailer Wheel #LH36VR uses 1/2"-20 lug nuts with a standard 60 degree cone like the #LHLR103.

Based on what I can find, it looks like the triton 02884-2 hub is a 5-lug idler hub. Virtually all of the 5 lug hubs will use a 1.98" Bearing Buddy #BB1980A-SS. We have dealt with several other very similar Triton trailers, and the 1.98"…

Hey Murphy, the Swagman Swivel Hitch Extender #S86SR is not going to work, but what you could use is the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks #PVD20B instead. This hitch adapter measures 42 9/16" from the farthest edge of the…

Using the Draw-Tite Sportframe Trailer Hitch Receiver #24978 on your 2019 Volkswagen Jetta the receiver is capable of supporting a trailer up to 2,000lbs with a tongue weight up to 200lbs. You will want to verify towing capability with your owners…

The 1-1/4" receiver does limit you but I have a solution to achieve a 7" rise for a ball mount. You do not want to use an extension since it will cut your capacity in half which means you wouldn't be able to tow that trailer. What you…

What that means is that the Malone MicroSport trailer, part #MPG460G, is level when the bottom of the coupler is 18 inches off the ground. To tow the trailer level you need a ball mount with a rise. Park your Nissan Altima on level ground and measure…