1. Hitch Anti-Rattle
  2. Lets Go Aero
  3. Fits 2 Inch Hitch
  4. Accessory Anti-Rattle
  5. Threaded Pin Style
  6. Standard Anti-Rattle
Anti-Rattle Hitch Pin for 2" Trailer Hitches

Anti-Rattle Hitch Pin for 2" Trailer Hitches

Item # SHP2061
lowest price pledge
Retail:$40.39
Our Price: $19.93
You Save: 51%
Hitch Anti-Rattle
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.79 lbs
Quantity: 
In Stock
Lets Go Aero Standard Anti-Rattle - SHP2061
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories. Call 800-298-8924 to order Lets Go Aero hitch anti-rattle part number SHP2061 or order online at etrailer.com. Free expert support on all Lets Go Aero products. Guaranteed Lowest Price and Fastest Shipping for Anti-Rattle Hitch Pin for 2" Trailer Hitches. Hitch Anti-Rattle reviews from real customers.
  • All Info
  • Reviews (53)
  • Q & A (24)
  • Photos
  • Why etrailer?

Lets Go Aero Hitch Anti-Rattle - SHP2061

  • Fits 2 Inch Hitch
  • Accessory Anti-Rattle
  • Lets Go Aero
  • Threaded Pin Style
  • Standard Anti-Rattle
  • Universal

This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories.


Features:

  • Anti-rattle pin reduces play and vibration in the hitch connection
    • Place block with spring inside ball mount or hitch accessory shank
    • Insert pin through hitch pin hole and anti-rattle block with spring
    • Tighten pin so ball mount or accessory is pulled tight against side of hitch receiver wall
  • Sturdy steel construction
  • Hitch pin can be turned into secure hitch lock with snap-on padlock (ACC3250 - sold separately)


Specs:

  • Application: 2" x 2" trailer hitch receivers
    • Ball mount or hitch accessory must have a hollow shank
  • Pin diameter: 5/8"


Note: This device can only be used with hollow-shank ball mounts and hitch accessories.


The anti-rattle Silent Hitch Pin from Let's Go Aero takes the rattle and play out of the connection between your trailer hitch and your ball mount or hitch accessory. The unique design features a sturdy steel block with an attached spring that is designed to sit inside the shank of your hitch-mounted accessory.


Silent Hitch Pin Diagram

Place the block inside your ball mount or hitch accessory and line up the hole in the block with the pin hole in your ball mount. Slide your ball mount into your hitch and insert the hitch pin. To activate the anti-rattle device, just tighten the pin. Doing this will pull the accessory up against the wall of your hitch receiver, thus keeping the accessory from moving around inside your hitch. No more annoying clanking or vibrating.



SHP 359 Let's Go Aero Silent Hitch Pin Antirattle Device for 2" Trailer Hitches

Replaces SHP 2061






Customer Reviews

Anti-Rattle Hitch Pin for 2" Trailer Hitches - SHP2061

Average Customer Rating:  4.9 out of 5 stars   (53 Customer Reviews)

This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories.

- SHP2061
by:

Easy install. No more loud clanking in the van when towing my 5x8 906155



- SHP2061
by:

This product is still going strong. I purchased a cheaper model for another hitch product and regretted doing so. This stays in place so pin lineup is perfect every time. 680115


Comments
This is still working out well. As I said a year ago dont go cheap. I have several hitch setups for bikes and motorcycles and the setup with this product I never have issues lining up.
Jerry L - 08/04/2020

96306

- SHP2061
by:

Very satisfied with this product. I like the hitch hauler to be stable and not rattle all of the time. 682737


Comments
It still works fine, no problems. Would recommend it if people want their hauler stay stable.
Ron H - 08/10/2020

96865

- SHP2061
by:

I was sick of the noise that the hitch made every time I drove over a pothole, speed bump etc so purchased one of the Anti-Rattle Hitch Pins from eTrailer - I should have done this years ago. The Pin works as advertised plus the service from Tommy was first class, as always!! 176077


Comments
After a year, still as good as on day one and still five stars!
Darryl D - 02/25/2016

16909

- SHP2061
by:

Awesome product, it works 680679


Comments
Still great, no more noise or rattle. No more Jenkins of my boat
Brian H - 08/05/2020

96427

- SHP2061
by:

Flawless.... a perfect fix to stabilize my hitch steps to my camper. Steps do not wobble any more. Easy to install and remove, highly recommend this product...could not be happier!!! thank you 417241


Comments
Year later, just as happy with this product.
Carlo P - 08/07/2018

42007

- SHP2061
by: 11/17/2020

913043



- SHP2061
by: 10/23/2020

Great quality. Giving it a test run sho rtly. 902746



- SHP2061
by:

Takes the rattle right out of my hitch mounted bike rack. Also wanted to give a big shout out to etrailer's customer service. Exremely responsive and then stand behind their products. Can't go wrong doing business with them. 895846



- SHP2061
by:

Quick delivery. Simple easy to use Product that works great. No keys to lose. 871322



- SHP2061
by:

860910



- SHP2061
by:

858721



- SHP2061
by:

Use for a cargo carrier about 6-7 times a year... works great and I would not hesitate to purchase this exact solution again. 844943



- SHP2061
by:

I bought two of these to use with my Extend-A-Bed (t-post for truck). Since I need two (one at my truck receiver and one at the joint of the Extend-A-Bed), I wanted one of the less expensive options that etrailer has for sale. I am very satisfied with the product. It holds my bed extender securely and keeps it from rattling. 830812



- SHP2061
by:

Works great! 796366



- SHP2061
by:

Simple to install, works good. 763877



- SHP2061
by:

Really holds a handicap chair lift solidly. Easily installed. 734524



- SHP2061
by:

As always, delivered on time & products high quality 719941



- SHP2061
by:

handles side to side slop but vertical play is terrible. hitch 2/2 shaft is too sloppy of a fit. it pivots on the bolt from the anti rattle asm thru the assembly and is noisy 717250



- SHP2061
by:

Helped to reduce noise in a poorly designed tow hitch receiver 706608



- SHP2061
by:

Works good 703704



- SHP2061
by:

Arrived right away and works perfectly! 691816



- SHP2061
by:

This cargo carrier was amazing on our trip to the beach. With the anti-rattle hitch pin you couldn't even tell it was back there. The only slight problem is that the clearance with it on our 2019 RAV4 wasn't great. We had a little trouble getting in and out of driveways, but we made it work. Customer service at etrailer.com was super. The agent helped me pick all the parts based on my needs and they worked perfectly. I will definitely return to the site when I have other auto needs. 679665



- SHP2061
by:

I ordered this product along with an extension for my receiver hitch on my pick up. I installed both today and after tightening there is no play, left, right or up an down. Very satisfied with both the extension and this anti rattle hitch pin. 662805



- SHP2061
by:

works well 660608


25
54
Show More Reviews

Ask the Experts about this Lets Go Aero Hitch Anti-Rattle

  • Difference between Lets Go Aero Anti-Rattle Hitch Pin SHP2061 and SHP359
    This is the Lets Go Aero Anti-Rattle Hitch Pin for 2" Trailer Hitches # SHP2061. We do not offer SHP359 but it is a similar design. You are correct the main difference between the two is that # SHP2061 includes the pin sleeve that helps reduce the space between the pin and hitch pin hole. This Anti-Rattle device will take out a majority of the movement in your hitch mounted accessory. I feel that it's most effective when used with bike racks and cargo carriers but still works great with...
    view full answer...
  • Is Sleeve Included with Let's Go Aero Anti-Rattle Hitch Pin
    The sleeve you point out in the picture of the Let's Go Aero anti-rattle hitch pin, part # SHP2061, is included. The smooth part of the pin has a smaller diameter than the threaded part and that sleeve takes up the gap in the pin hole. Yes, you can use this pin to tow your trailer as long as the ball mount has a hollow shank.
    view full answer...
  • Anti-Rattle Hitch Lock for 2016 Toyota Tundra with Wider Hitch Tube
    For an anti rattle hitch lock to fit the wider hitch on your 2016 Toyota Tundra the best option is the SilentACT Anti-Rattle Trailer Hitch Lock # SHP2082 which has a usable span of 2-1/2 inches which means it would work well for you. I attached a review video for this for you to check out as well.
    view full answer...
  • Options on How to Fix a Loose 2 Inch Ball Mount
    I have a couple different options on ways to fix a loose ball mount. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # 93347, wedges itself between the receiver and ball mount to take up play and eliminate rattle. The Roadmaster Quiet Hitch, # RM-061, helps eliminate rattle and sway within your hitch receiver.
    view full answer...
  • Anti-Rattle Hitch Pin for a 2-1/2 Inch Trailer Hitch Using a Reducer Sleeve
    For the 2-1/2 inch trailer hitch using a reducer sleeve you will need an anti-rattle device with a longer pin to compensate for the wider hitch. I recommend the SilentACT # SHP2082 or XL device # SHP2040-XL. For either they function as anti-rattle devices and locks. If it were me I would choose the SilentACT because the cam lever makes installing and removing it much easier than a threaded locking pin.
    view full answer...
  • Recommended Options To Fix Loose 2-Inch Ball Mount on 2017 Dodge Durango
    We have a few options that help fix a loose ball mount on your 2017 Durango. First, check out the Anti-Rattle Hitch Pin, part # SHP2061. This pin reduces any movement or vibration between your hitch and hollow shank ball mount. Another option is the Roadmaster Quiet Hitch, part # RM-061, helps eliminate rattle and sway within your hitch receiver.
    view full answer...
  • Will the Lets Go Aero Anti-Rattle Device # SHP2061 Work w/ a 2 inch Hitch Extension
    Yes, the Let's Go Aero Anti-Rattle Hitch Pin, # SHP2061, will prevent the extension from rattling inside the 2 inch hitch, as long as the extender you are using is hollow. Please note, that when using an extension, the tongue weight capacity of the hitch is reduced by 50 percent so the total weight of the bike rack and the bikes on it must be less than 50 percent of the tongue weight capacity that's listed on the identification sticker affixed to the hitch.
    view full answer...
  • Anti-Rattle hitch Pin that Can be Used to Tow a Trailer
    When towing a trailer you can use the Let's Go Aero anti-rattle hitch lock, # SHP2061. You can use # SHP2061 even if the pin does not go all the way through the shank. The clip is just a fail safe. Provided the pin is properly tightened down then the lock washer will provide tension to keep the bolt from backing out. The pin, if threaded all the way in, measures 4-1/2 inches from the outside of one pin hole to the tip of the pin. It is 3-3/4 inches to the notch for the clip so it would...
    view full answer...
  • Replacement Lock for Let's Go Aero # SHP2061 Anti-Rattle Hitch Pin
    The # SHP2061 does have a replacement lock available, it is part # ACC3250.
    view full answer...
  • Can the Lets Go Aero Anti-Rattle Hitch Pin be Used with Tow Bar
    The Let's Go Aero Anti-Rattle Hitch Pin # SHP2061 that you referenced will work well for your with your tow bar to flat tow your Jeep. Your tow bar will need to have a hollow shank in order for the anti-rattle pin to work properly. I have attached a review video of this hitch pin for you. The # SHP2061 will work great to tow the weight of your Jeep. The hitch pin is designed to work with all Class III towing applications and has a weight capacity that exceeds the weight of your vehicle....
    view full answer...
  • Does Anti-Rattle Hitch Pin # SHP2061 Come with Bushing
    The bushing you mentioned in the product picture for the Anti-Rattle Hitch Pin # SHP2061 that you referenced does come with the kit. The video is older shows an older version of this part number that did not include this. It's in the process of being reshot (as of August 2018).
    view full answer...
  • How to Prevent a 12 Inch Receiver Hitch Extension From Rattling in Receiver
    Adding an extension introduces another component in between the receiver and the ballmount or hitch accessory. Because of this, getting a certain amount of wobble is unavoidable. If you're using the extension for a hitch mounted accessory, you can use an anti-rattle device like part # BX88224. However, keep in mind that using an extender will lower the tongue weight capacity of your hitch by 50 percent. If you'll be towing, you'd be better off using a longer ball mount, if the longer...
    view full answer...
  • Does the Anti-Rattle Hitch Pin # SHP2061 Fit the Snap-On Lock # ACC3250
    Yes, the Anti-Rattle Hitch Pin # SHP2061 is compatible with the Snap-On Lock # ACC3250 that you have in your order.
    view full answer...
  • Anti-Rattle Hitch Pin Needed with a 5/8" Diameter
    I have the perfect alternative for you! The Let's Go Aero Anti-Rattle Hitch Pin # SHP2061 is for accessories and ball mounts that fit a 2" receiver and have a hollow shank. The block goes inside the shank of your accessory and the threaded pin pulls it in to the side of the receiver to help eliminate movement. The pin has a 5/8" diameter like what you are looking for. This comes with just a clip but you can add the padlock # ACC3250 if you want more security. A demonstration video...
    view full answer...
  • Options on How to Fix Loose Ball Mount
    I have just the thing to fix a loose ball mount or drawbar. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # 93347, wedges itself between the receiver and ball mount to take up play and eliminate rattle.
    view full answer...
  • Recommended Anti-Rattle Locking Hitch Pin for the Lets Go Aero BikeWing
    I do have an anti-rattle locking hitch pin for the Lets Go Aero BikeWing part # LGA54FR but the Anti-Rattle Hitch Pin for 2" Trailer Hitches part # SHP2061 will not work. Instead, you will want to use the SilentACT Anti-Rattle Trailer Hitch Receiver Lock part # SHP2082 as this locking hitch pin is specifically designed to be used with this bike rack. In order to secure the bikes to the rack you would want to use a cable lock like the Deadbolt Cable Lock part # e98891. I have included...
    view full answer...
  • Anti-Rattle Device Recommendation for Use with MaxxHaul Carrier MT70106
    What you would want is an anti-rattle device like the part # SHP2061 which will install in the shank of the # MT70106 and will take out the movement. I attached a review video for this for you to check out as well.
    view full answer...
  • Hitch Lock and Hitch Pin Compatibility Between Brand Name
    The Snap-On Lock for 5/8" Anti-Rattle Silent Hitch Pin # ACC3250 is only a confirmed fit for use with the Anti-Rattle Hitch Pin for 2" Trailer Hitches # SHP2061. Threaded hitch pin and locks from different manufacturers are not interchangeable. For the Thule hitch pin # 853-5917 you will want the Replacement Lock Housing for Thule Snug Tite Hitch Lock # 753-3725-02 as well as a locking cylinder # Thule One-Key System Lock Cylinders - Qty 2 # TH512. The complete hitch lock system...
    view full answer...
  • Best Way to Use a Kuat Sherpa 2.0 Bike Rack on a 2" and a 1-1/4" Receiver
    We have 2" to 1-1/4" receiver adapters that you can use on your 2020 Toyota RAV4. As you said, the Kuat Sherpa 2.0, part # SH12P, fits a 1-1/4" receiver and can be used with the Kuat Adapter, part # D101, to fit a 2" receiver. However, if you're looking to switch between these two often, then a better option is to use a hitch adapter rather than the bike rack's shank adapter. The Brophy Reducer, part # HT02, is exactly what you're looking for. This can be inserted into a 2" receiver...
    view full answer...
  • How to Remove the Ramp on the MaxxTow 27x47 Cargo Carrier Part # MT70100
    I have attached a photo of the MaxxTow 27x47 Cargo Carrier part # MT70100 which shows the ramp in the stored position. There is then two pull pins on either side which will allow you to swing the ramp down for loading. If you wanted to remove the ramp entirely you would need to remove the two pull pins first and then there is a nut and bolt on each side at the pivot point. It does not fold into the carrier as you mentioned. For an anti-rattle device, I recommend using the Anti-Rattle...
    view full answer...
  • Lock Recommendation for Anti-Rattle Bolt of Reese Eclipse Bike Rack
    For a snap on pad lock that you can add to the anti-rattle bolt of your Reese Eclipse bike rack part # 63124 you would want the part # ACC3250. This has been confirmed as a fit for your bike rack and would work well. You will also need the part # SHP2061 with the lock.
    view full answer...
  • Recommended Anti-Rattle Hitch Pins For 2015 Chevrolet Tahoe
    We have a couple of options for anti-rattle devices that will work for your 2015 Tahoe. If you have some room on the side of your trailer hitch I recommend the Lets Go Aero Hitch Locks, part # 63232. This is used in place of the standard pin and clip. This has a barrel-style lock and comes with 2 keys. These hitch locks do require a hollow shank. For a non-locking anti-rattle hitch pin I recommend part # SHP2061.
    view full answer...
  • Hitch for 2001 Ford Expedition XLT to Allow Use of Slide-Out Cargo Carrier H01472
    Draw-Tite Ultra Frame Class IV Trailer Hitch Receiver # 41920 is a custom-fit 2-inch hitch made specifically for the Ford F-150 and F-250 light-duty pickups and so it does not fit your 2001 Ford Expedition XLT. But we do have similar 2-inch Class III hitches made for your vehicle that appear on the linked page. Curt offers their USA-made hitch # C13049 and Draw-Tite makes Max-E-Loader Trailer Hitch # 41527; both of these share a 600-lb tongue weight rating and both install without drilling...
    view full answer...
  • Recommended Cable Lock For Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Rack
    We do not offer a lock that will work with the 5/8 anti-rattle bolt that came with your Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Rack, part # PS63138. Since the bike rack shank has proprietary threads, a standard non-threaded hitch pin like part # SHP2061 and # ACC3250 lock will not work. I recommend using a cable lock like part # e98891. You would just route the cable through the bike frames and then thread the cable through the safety chain loops on your trailer hitch.
    view full answer...

Do you have a question about this Hitch Anti-Rattle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality hitch anti-rattle for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch anti-rattle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Andrew K
Written by:
Lindsey S
Video Edited:
Jeff D
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Sarah W
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.