Search: hitch pin   >  

Hey Will, the interior dimensions of the etrailer enclosed cargo carrier part #C63ZJ is 60 inch wide, 24 inches deep, and 30 inches tall.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Jonathan, congrats on the new truck. The 7" drop should be enough, but it is hard to say for sure without knowing what trailer you will be pulling. The 7" drop will get your ball height at 17" or 18" (we measure from the upper…

Hi Ben; if you're looking for a traditional gauge on the #GY79FR you aren't going to find one. The tongue weight scale is the red and green marking on the arms as seen in the picture below. The red section at the top indicates your max tongue…

Hello Michael, thanks for reaching out. The Roadmaster Dual Hitch Receiver Adapters #RM23SR and #RM-077-10 both have 10" between both receivers and they are both rated or 10,000 lbs. The only noteworthy difference is the placement of the…

Hey Chris, I checked with Rhino-Rack for you and was able to verify exactly what you need to add the Rhino-Rack roof rack to your 2023 Ford Expedition MAX. You didn't mention the length of your crossbars so just to be thorough, the correct bars…

Hey David, Yes, Dexter acquired Kodiak back in 2018 and has rebranded a lot of their components. Are you looking for an electric-over-hydraulic actuator, like the Dexter BrakeRite #DX82KR, or are you wanting a surge brake actuator like the Dexter…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The biggest difference is the size of the ramps. The Flint Hill Goods #FHG23ZR ramps are 6' long and 14-1/2" wide for each ramp. The Stallion #288-07489 ramps are 65" long and 20-1/2" wide for each ramp. The Stallion ramps are only…

For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the warranty and can have…

Your Dometic 57915.531 is a 13.5k BTU AC unit which the Advent Air RV AC Unit #ACDOM135 is the same size and is also designed to replace Dometic units.

Trailer Hitch Pins like the Curt #C21500 do not have specific weight ratings and there is not a database available that will have this type of information. Generally speaking, a 5/8 inch diameter pin, which is designed for Class III, IV and V trailer…