These L-shape brackets make it simple to bolt an 8" or 9" wide, round fender to your single-axle trailer with 13", 14" or 15" wheels. Galvanized steel construction resists ... that resists corrosion Made in USA Specs: Quantity: 2 fender-mounting brackets Note: 2 brackets are required to mount 1 fender Application: 8" or 9" wide fenders for single-axle trailers; designed
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light ... Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward
Add a backing plate to your tandem-axle trailerfender (HP24VR) to block water and road debris from hitting the side of your trailer. 18-Gauge steel is durable.Features: Curved backing plate prevents water and road debris from hitting the side of your trailer Weld onto your etrailer tandem-axle trailerfender (HP24VR) Sturdy, 18-gauge steel construction
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailerfender. Amber light faces front, and red light faces rear. Surface mount with bracket (not included). Accepts ... Features: Dual-face LED trailer light installs on your trailerfender Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit
2-Person camping tent with built-in rainfly sets up in seconds. Remove from storage bag and toss in the air. Internal fiberglass poles spring apart opening tent. Fine mesh screens keep out bugs. 2 Overhead loops for hanging flashlight or other gear.
Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailerfender. Amber light faces front, and red light faces rear. Surface mount ... Features: Dual clearance light installs on your trailerfender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side
There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an experienced welder.
The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
You are definitely going to need radial tires for highway speeds and the best option is the Taskmaster 4.80R12 Radial Trailer Tire #TT48012C. Radial trailer tires are constructed in a manner so they have cords which run at 90 degrees to the…
There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…
Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum clearance of 3 inches between the top of your tire and the underside of your fender.This should give you adequate clearance for…
The measurements we've provided for the Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1 #HP36VR were taken from outside edge to outside edge of the bottoms of the fender (32"), from the top of the…
We have a online diagram that will help you understand how the break away system is wired into your trailer. It is actually a simple installation. The system splices into the existing trailer wiring. The break away box will have 3 wires coming out of…
The lid of the Bright Way Trailer Breakaway ICU Kit with 12V, 5-Amp-Hour Battery, Charger, and Wire Loom #BW94FR that you referenced has a wiring diagram shown that details how it wires. Not seen is there is a single wire that runs up to running…
On this page (typically below the product links) there is a helpful link section that will have the install instructions fo the Hopkins Breakaway kit part #20400 that you referenced. I also attached an install video that shows the kit installed as…
While I couldn't find any reference to a tank with one less component, the 6231 you mentioned is the part number - and is the exact same thing as - the Demco SBS Coach Air Kit for Air Force One Supplemental Braking System #SM99627. It used to be…
Radial tire has a ply rating of 8 and a 2,150-lb maximum load at 65 psi. The 15" diameter x 5" wide steel trailer wheel has a 5 on 4-1/2 bolt pattern and a corrosion resistant, black powder ... Features: Tire-and-wheel assembly is ideal for stock trailers, utility trailers, and campers Steel wheel with modular design by Dexstar is sturdy and corrosion resistant 2-Step finishing process
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailerfender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket ... Features: Dual-face incandescent trailer light installs on your trailerfender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need
6-1/2" x 2-1/8" Oval. Waterproof, LED trailer utility light produces bright white light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts ... Features: LED trailer utility light produces bright white light Not certified for backup light function Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailerfender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Hardwired ... Features: Dual-face LED trailer light installs on your trailerfender Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit
Cool, artsy double-shaded pendant fixture adds stylish, accented light over your RV dinette table or kitchen counter for prepping and enjoying a family dinner. Energy-efficient LEDs last longer and burn brighter than incandescent bulbs.
3-7/8" x 1-1/4" Rectangle. Trailerfender light functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts ... with amber and red LEDs Compatible with 12V DC systems Mounts on surface of trailerfender with bracket (sold separately) - hardware not included Designed for top or side placement at widest point of trailer
This sturdy, black powder coated chock attaches to your trailer's wood floor to help stabilize your bike. Keyhole slots make it easy to remove the wheel chock for storage. Steel construction ...
Weatherproof clearance/marker light installs on your passenger-side trailerfender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailerfender Amber lens faces front of trailer Red lens faces rear of trailer Designed for passenger side fender Weatherproof housing and lens
Weatherproof clearance/marker light installs on your driver-side trailerfender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailerfender Amber lens faces front of trailer Red lens faces rear of trailer Designed for driver side fender Weatherproof housing and lens protect
This 14" x 5-1/2" trailer wheel has 5 on 4-1/2 bolt pattern with a 3.19" pilot hole diameter. The black, rustproof aluminum wheel features an open-spoke design with a machined face. in lug nut wells help to keep wheel securely in place on trailer hub Prevent holes from wearing down Eliminates the need for constant retightening of lug nuts High-quality wheel meets DOT specifications
This steel fender step provides easy access to the bed of your trailer from the side. Bolt it or weld it onto your fender, or bolt it directly onto your trailer's frame. Galvanized steel ... Features: Creates sturdy step near the fender for easy side access to your trailer Constructed of durable, corrosion-resistant, 12-gauge galvanized steel Bolts to your trailer'sfender or your
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailerfender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket ... Features: Dual-face incandescent trailer light installs on your trailerfender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need
These L-shape brackets make it simple to bolt a 7" wide, round fender to your single-axle trailer with 8" or 12" wheels. Galvanized steel construction resists corrosion. Two brackets ... that resists corrosion Made in USA Specs: Quantity: 2 fender-mounting brackets Note: 2 brackets are required to mount 1 fender Application: 7" wide fenders for single-axle trailers; designed for 8"
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailerfender. Amber light faces front, and red light faces rear. Surface ... Features: 2-Sided clearance light installs on your trailerfender Amber light faces front of trailer Red light faces rear of trailer Reversible assembly can be installed on either driver's-side
3/4" Round. Waterproof mini trailer light with 2 red LEDs functions as both a clearance light and a side marker light when properly mounted. Clear polycarbonate lens. Recessed mount ... Features: Small, round trailer light functions as both a clearance light and a side marker light when properly mounted Sealed, waterproof construction is submersible LEDs make great replacements
3-7/8" x 1-1/4" Rectangle. Waterproof, 2-LED trailer marker light mounts on your trailerfender. Amber light faces front, and red light faces rear. Surface mount with bracket (sold ... Features: Dual-face LED trailer light installs on your trailerfender Amber light faces front of trailer Red light faces rear of trailer Thinline Series has a low profile so that light can fit
Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leaf springs. Wet bolts ... Features: Leaf spring mounting hardware upgrades your leaf spring suspension system Thick shackle straps, wet bolts, and bronze bushings are long-lasting and minimize intensive trailer maintenance
Filter Results
