LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

Item # L11390

lowest price pledge

Retail:$13.37

Our Price: $6.43

You Save: 52%
Tools

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.02 lbs

Quantity: 
In Stock
LubriMatic Tools - L11390
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Grease and Lubricants
  • Industrial Strength Grease
  • Brake and Bearing Grease
  • LMX Red Grease
  • LubriMatic
  • Lithium Complex
  • 14 oz
  • Petroleum-Based
Formulated to endure extreme pressure, outrageous heat or cold, as well as intense wear and tear. LMX "Red" Grease will fuse to bearings and other moving parts without breaking down when exposed to water. 14 oz. Cartridge. Lowest Prices for the best tools from LubriMatic. LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge part number L11390 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (44)
  • Q & A (126)
  • Videos (1)
  • Photos
  • Why etrailer?

LubriMatic Tools - L11390

Formulated to endure extreme pressure, outrageous heat or cold, as well as intense wear and tear. LMX "Red" Grease will fuse to bearings and other moving parts without breaking down when exposed to water. 14 oz. Cartridge.


  • Industrial and agricultural lithium complex formula
    • Ideal under temperature and pressure extremes, shock loads and high wear situations
  • Superior adhesion to bearing and moving parts
  • Highly water insoluble
  • Rated GC-LB by NGLI
    • NGLI #2, drop points 500 degrees Fahrenheit


11390 LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge







Video of LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for LubriMatic Tools - Grease and Lubricants - L11390 Review


Customer Reviews

LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge - L11390

Average Customer Rating:  4.8 out of 5 stars   (44 Customer Reviews)

Formulated to endure extreme pressure, outrageous heat or cold, as well as intense wear and tear. LMX "Red" Grease will fuse to bearings and other moving parts without breaking down when exposed to water. 14 oz. Cartridge.

- L11390
by:

Time to grease the suspension on my trailer. Ordered LMX grease and a new grease gun from e-trailer. As always, great service and followup. Product arrived in 2 business days. I will continue to do business with these guys - they are the BEST! 637078



- L11390
by:

Great for wheel packs. 374022



- L11390
by:

The web site was very useful in determining what I needed to repair my trailer. Transaction was smooth, shipping quick and the communication was certainly better than todays standard. Parts fit perfectly and easy to install. Will certainly use eTrailer for future needs! 112200



- L11390
by:

Right stuff to repack 4 wheels. 470981


Comments

A year later, after heavy use, things are still good.

Double E - 01/29/2019

49018

- L11390
by:

Fast shipping! Product works as intended. Will definitely buy from etrailer again 227985


Comments

Great products for a great price. I like them very much.

JR - 09/27/2016

21257

- L11390
by:

I have been in business for over 30 years and a hobby of mine is I look at different company operations thinking what could be done to improve their service and etrailer.com does it right. From tracking your order, emails and videos on products you just purchased. This allows you all the information you need to install you parts right the first time. Great Job! 497008



- L11390
by:

Picked up a few tubes of Red LMX grease for my EZ Lube hubs on my camper. They were recommended by etrailer as a good grease for wheel bearings. I have used Lubrimatic grease over the years and had good luck with it. The red color will make it easy to see when the old grease is flushed out. 370667



- L11390
by:

I have put over 4,000 miles on my 7,000 lb travel trailer since I replaced the bearings and lubricated them with Lubrimatic LMX grease purchased from etrailer.com. The bearings have performed without any issues. I have since done a minor re-tightening of the bearing castle nuts. Of the 4 wheels, only one needed re-tightening. I recommend this product without hesitation! 414795



- L11390
by:

I just received and used the Lubrimatic LMX grease, so I can only comment that it looks like a high quality product. I did want to comment that I was using it to pack 4 Dexter 3500lbs EZ-lube spindles/bearings, and 14oz was barely adequate. I was short a couple pumps of the grease gun. So my advice is to figure on 3 spindles per tube, or maybe to be more precise: number of spindles you can do = 4 x #LMXtubes - 1. You may need some extra for maintenance in any case. 408598



- L11390
by:

Good grease for my camper bearings, but it needs to be packaged it a separate box so it doesn’t get smashed onto the other parts. Thanks Ricky! Your help was Greatly needed. 545723



- L11390
by:

Couldn't find this product at any store but found it here. Ordered it, delivered very quickly. Will use them again! 450427



- L11390
by:

Haven't tried the grease yet. 2 of the 6 tubes of grease were damaged in transit!! 404995



- L11390
by:

Excellents products 171361



- L11390
by:

What can you say about Grease. It work s! 103588



- L11390
by:

So far everything looks good. Haven't installed it yet. Glad I could buy everything at one time. Finding the seal was the hardest part. Called Dexter to verify. 695254



- L11390
by:

Great product 675258



- L11390
by:

Great 644707



- L11390
by:

Found what I was looking for at etraile r!! 641345



- L11390
by:

Good Product 628069



- L11390
by:

Ideal for packing bearings 598461



- L11390
by:

Good grease. Used it on my EZE-LUBE Aluma trailer hubs. 591226



- L11390
by:

Seems to hold up better than the blue grease i was using previously on my snowmobile trailer. 588416



- L11390
by:

Very fast shipping, received in perfect condition. Using this to grease bearings on RV travel trailer. 569986



- L11390
by:

Very good grease. Use it on everything 547358



- L11390
by:

Great product. Two years, zero problems so far. 523819



- L11390
by:

Easy online order and parts came in timely manner. 489313



- L11390
by:

Very good bearing grease 487616



- L11390
by:

Just what I ordered,good price. 483561



- L11390
by:

No complaints here. 456742



- L11390
by:

This grease meets my requirements and those of my trailer manufacture. No problems. 453060



- L11390
by:

Really greasy 450439



- L11390
by:

Fast shipping. 424721



- L11390
by:

A great product at an excellent price. 424215



- L11390
by:

As described...Fast shipping... Thanks 367434



- L11390
by:

Great product 282835



- L11390
by:

Great product! Excellent value & highly recommended. 280927



- L11390
by:

Good product 251934



- L11390
by:

Thank you for your advise and product set. Perfect timing of product delivery 209174



- L11390
by:

I found what I was looking for at a great price..Quick Delivery !!! 174668



- L11390
by:

e-trailer had the grease I needed and shipped it out same day. It arrived in good condition 157587



- L11390
by:

Two thumbs up! 150910



- L11390
by:

All items arrived as advertised! 140515



- L11390
by:

a great quality grease for my 25 foot travel trailer with Dexter EZ lube axles. 138706



- L11390
by:

Seems to work just fine. Etrailer has been a great company to purchase from. 66780


44
44

Ask the Experts about this LubriMatic Tools

Do you have a question about this Tool?


  • Replacement Bearing Kit for 7,000 lb Dexter Axles
  • For your Dexter 7K axles, you will want the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # BK3-200 for each hub if you have the standard spindle. If you have the EZ Lube spindle with the grease zerk then you will want # BK3-210 to include the EZ Lube washer. For the grease, I recommend the LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge # L11390. If you want to pack them easily, I recommend using the Bearing Packer - Plastic # PTW1218. I've also attached an article...
    view full answer...

  • Replacement Bearings for Dexter Idler Hub Assembly for 3500 lb Axles # 84545BX
  • The bearing replacements I recommend for the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 # 84545BX are: Inner bearing: # L68149 (1.378" inner diameter) Outer bearing: # L44649 (1.063" inner diameter) If you need the grease seal, I recommend # 58846 or # RG06-050 which have the same measurements. You can get everything in a kit using just the Bearing Kit for 84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100. You may also be interested in...
    view full answer...

  • Replacement Equalizers for EZ-Flex Suspension
  • Thank you for the photo; due to the damage of the equalizer on your E-Z Flex Suspension System # K71-652-00 what you need to do is replace that equalizer. If just one is damaged you can replace it with a single Replacement 5-5/8" Equalizer for E-Z Flex # 013-143-03 although if the other side is showing wear I recommend replacing both, which is part # K71-654-00. I also recommend making sure you grease the equalizers every 3 months or 3,000 miles with red grease such as # L11390...
    view full answer...

  • Recommended Replacement Brake Hub and Drum Assemblies for AL-KO 8490 Brake System
  • I can definitely help you replace your AL-KO 8490 hub and drums that are worn. These hub and drum assemblies are for 3500 lbs axles, and there are some great replacement options for you. I recommend the etrailer.com Hub and Drum Assembly # AKHD-545-35-K. This hub and drum uses # L68149 inner bearing and # L44649 outer bearings. This assembly includes the bearings, races, grease seal, grease cap, and lug nuts. This has a 10 inch diameter and a 5 on 4-1/2 bolt pattern. For a 10...
    view full answer...

  • Reese Revolution Pin Box Grease Maintenance
  • Yes, you will need to grease the skid plate and around the wedge on the Sidewinder/Revolution. I have included a picture from the instructions for Sidewinder # RP61410 showing where the grease needs to go. You can use grease # L11390.
    view full answer...

  • Recommended Grease Conversion for Dexter 12k Oil Bath Axles
  • The Dexter 12K oil bath axles can be changed over to grease without any issues. The oil does keep the bearings lubricated well, but there is a much higher risk of leaking which leads to a much higher risk of failure. I'd personally move to grease # L11390 and make sure it is packed well into the bearings using # PTW1218. This will allow you to use your same bearings and oil cap, but you will need to replace the seal once removed to pack the inner bearing. For that you can use # 10-56.
    view full answer...

  • Grease Recommendation and Schedule for Dexter EZ Lube Spindles
  • Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer under conditions of extreme heat or near its maximum load capacity. This and other recommended trailer maintenance procedures are outlined in the linked article, which may interest you. The best grease around for trailer hubs is the "Red"...
    view full answer...

  • How to Grease the Bearings on My Trailer
  • Greasing the bearings is actually a fairly easy process. It does take a little bit of time to complete, but after you are done you won't have to worry about greasing the bearings again for a few years. I do have some recommendations to help make this process a bit easier for you. When it comes to packing the bearings with grease you do have a few different options. You can either do it by hand or you can use a grease packer. Although doing it by hand is definitely the most cost efficient...
    view full answer...

  • Wheel Bearing Grease Recommendation for 7k Lippert Axle
  • The RED grease is the best grease for trailer hubs. It's marine grade and the most heavy-duty grease around so its what we recommend the most. For that you would want # L11390. This grease also happens to be the most universal. You are going to need to measure your current spindle to determine whether or not you need a 2-1/8 inch seal like # RG06-090 or if you need a 2-1/4 inch seal like # RG06-070. You will need to take the measurement of the spindle where the grease seal rides....
    view full answer...

  • Choosing The Correct Hub And Spindle For Your 2,000 Lb Axle
  • Yes, the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles part # AKIHUB-545-2-G-EZ-2K is a direct fit for the EZ Lube Spindle 1.25 RD STUB part # R104BTREZ. For future references, in order to ensure an exact fit, you will need to find the part number on the inside edge of the bearing and make sure it is a compatible fit with your spindle, using our chart. Part # AKIHUB-545-2-G-EZ-2K requires a inner and outer bearing inner diameter of 1.06" which again is included in the hub kit...
    view full answer...

  • Replacing Brakes on Northwoods Arctic Fox Silver Fox 32 5th Wheel Trailer
  • Your Northwoods Arctic Fox 32 5th wheel probably has a gross weight around 16K so it probably uses two Dexter 8K axles. This is a popular axle for 5th wheels and we offer suitable 8K-rated brake sets like Dexter's Self-Adjusting Electric Drum Brakes # K23-532-533-00. These USA-made brakes use a 4-bolt mounting flange and they fit with trailer wheels that are 16-inch diameter and larger. These brakes fit hub/drums that are 12-1/4 x 3-3/8-inches and the mounting hardware is included. A...
    view full answer...

  • Type of Grease in Dexter Pre-Greased Trailer Idler Hub Assembly 84550UC1-EZ
  • The Dexter Trailer Idler Hub Assembly # 84550UC1-EZ comes pre-greased with LMX Red Grease such as Plews Edelman # L11390 and UltraLube # L10320. The Plews red grease is petroleum based and the UltraLube is bio-based but both are cross-compatible so you can use either.
    view full answer...

  • Best Grease to Use in Trailer Hubs
  • The highest quality grease we carry for wheel bearing is the LMX red grease like the part # L11390 that you referenced. If you are looking for a brand that is available in both a cartridge and a can you would want the part # L10320 for the cartridge. LMX Red is heavy-duty, premium grease for the toughest lubricating jobs on the biggest, heaviest equipment. It performs better under higher pressures and temperatures than standard multi-purpose grease, and it resists water better. Because...
    view full answer...

  • Available Formulas of Wheel Bearing Grease for Use in Dexter Hubs
  • Dexter EZ-Lube axles can use any formula of wheel bearing grease including the LubriMatic Marine Trailer Wheel Bearing Grease # L11399. Some formulas are made for specific applications; marine wheel bearing grease is especially formulated to resist water. LMX red grease # L11390 is made specifically for high pressure/high temperature industrial applications but it can also be used in trailer wheel bearings. You may care to check out the linked article that covers the different grease...
    view full answer...

  • Best Wheel Bearing Grease for Utility, Camper, and Horse Trailers
  • The highest quality grease we carry for wheel bearing is the LMX red grease like the part # L11390. LMX Red is heavy-duty, premium grease for the toughest lubricating jobs on the biggest, heaviest equipment. It performs better under higher pressures and temperatures than standard multi-purpose grease, and it resists water better. Because it resists water and sticks in place well, this grease will work on external parts that are exposed to the weather. It provides premium protection for...
    view full answer...

  • Recommended Disc Brake Conversion for 7,000 lb Dexter Axles
  • On your 2018 Montana 3791 RD, with Dexter 7K axles, we do have the parts but not in a kit for axles that large. I recommend the Kodiak Disc Brake Kit - 13" Hub/Rotor - 7,000 lbs # K2HR712D along with Bearing Kit # BK3-100. I recommend using grease # L11390 and cap # F001520 instead of doing the oil bath simply because if a seal fails you can melt your bearings and cause more issues than what grease would allow. Then for the electrical aspects, I recommend the HydraStar Electric-Hydraulic...
    view full answer...

  • How To Replace Bearings and Seals on Unknown Brand and Size Trailer Axle
  • To find the proper bearings you will need to remove your current hubs. Once you remove the hubs, you can remove the current bearings and look on the face of both the inner and outer bearing for a number printed on it. If you give me those numbers, I can help you get the replacements you need that may or may not have the same number. If you can't get a number off the bearings, then you will need to take a digital caliper # PTW80157 and measure the spindles. The spindles will need to...
    view full answer...

  • Recommendations for Bearing Buddies and Grease on Dexter 7,000 lb Axle
  • Bearing Buddy Bearing Protectors like # BB2717SS will not work with E-Z lube axles unless you remove the grease zerk fitting like you mentioned from the spindle. Once that grease zerk is removed, then the Bearing Buddy will work as intended using the spring loaded design and integrated grease zerk to keep the bearings well lubricated and maintained. When adding grease, you need to be careful not to mix styles of grease as they aren't compatible in most instances. So you will either...
    view full answer...

  • Can Oil Bath Hubs be Converted to Grease Hubs
  • You'll basically just need to remove as much of the oil from your hubs as you can and then pack them with grease instead of oil. Oil seals and caps seal better than grease seals and caps so to make the conversion you want to make is not hard at all. It's when people want to go the opposite direction to they need new seals and caps. For grease you'd then want the LMX Red grease # L11390. Also, Bearing Buddies aren't a requirement so you don't have to find a Bearing Buddy to fit your hub threads.
    view full answer...

  • How To Tell If I Have An EZ Lube Axle
  • If you look at the outermost part of the spindle on your axle there will be what is called a grease zerk or grease gun fitting. It will look like a tiny round ball which is where you can attach a grease gun to grease your spindle. If your spindle has a zerk on it then you have an E-Z lube spindle and you will want to use either the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K if you have drum brakes or the part # AKIHUB-545-35-EZ-K if you don't have brakes. The price difference...
    view full answer...

  • How Often Should Dexter EZ-Flex Equalizers Get Greased
  • I spoke to my contact at Dexter and he informed me that they recommend greasing the E-Z Flex equalizers every three months or 3,000 miles. I also attached a pretty helpful guide to how often trailer components should be maintained. For grease Dexter recommends wheel bearing grease. For that we recommend the red grease part # L11390. A shock kit would help your trailer and would work well with the EZ Flex system but since you said you have square axles we don't have a kit for that....
    view full answer...

  • Can Lubrimatic Red Grease be Used for Trailer Wheel Bearings
  • You can use the red grease # L11390 for trailer wheel bearings if you wanted. You can also use wheel bearing grease # L11465 which is designed for use on trailer running gear, including wheel bearings. It also has a slightly higher temperature rating, 520 degrees, compared to 510 degrees for the red grease. When adding new grease you will need to make sure that the new grease is compatible with the old grease or remove the old grease completely. Incompatible greases can break each other...
    view full answer...

  • Which Grease Should be Used with a Dexter Trailer Axle
  • Red lithium grease such as # L11390 is one we use often here for installations and it is compatible with other Lithium formulas. I have included a link to our help article that covers grease compatibility. There are greases that are not compatible with each other. A polyuria LUB-LM Type grease is compatible with most other greases which is why it is recommended. The only greases that it is not compatible with are Barium Complex and Bentonite Clay. It is compatible with lithium greases....
    view full answer...

  • Fulton F2 Trailer Jack to Fit 5x3 Inch Trailer Frame
  • The Fulton F2 # F1413020134 will fit trailer frames that are either 3 by 3 inches or 3 by 4 inches. For your 3 by 5 inch trailer use # F1413140334. The reason we sell the F2 without any hardware (Part # F1413100334) is so it can be purchased for a larger variety of trailer frame sizes. This way someone can purchase the jack and then source the hardware elsewhere to fit their application. To grease the F2 apply a grease like # L11390 to the threads. I've linked a video of the jack...
    view full answer...

  • Complete Electric Brake Installation for 2,000 lb Trailer Axle
  • With the axle measurement and the bearing number, I can confirm that you have 2,000 lb capacity axles on your trailers. You will want to get the Brake Mounting Flange, # 4-34, to weld onto each side of each axle. With that flange in place, you will want to mount the 7 inch Electric Trailer Brake Assembly # AKEBRK-2L on the left side of the axle and the # AKEBRK-2R on the right side of the axle. These are nearly identical parts, but installing on the correct side is very important....
    view full answer...

  • Replacement Bearings and Hubs for Hudson Tandem Trailer
  • The easiest way to find replacement bearings and a compatible replacement hub is to locate the original bearing part numbers. The linked photo shows the typical location and appearance of these part numbers. If you cannot find part numbers you can measure your spindle to three decimal places (such as 1.234) using a precision caliper like # PTW80157. If you find your bearing numbers you can simply search our site using those numbers. If you have dimensions you can use the linked page...
    view full answer...

  • Can a 1-1/16 Inch Trailer Axle Spindle Handle Speeds of 75 Miles Per Hour
  • Spindles typically do not have a speed rating. Traditionally, the component that limits the trailer speed is the tire. My contact at our spindle manufacturer confirmed that the spindle will perform well when the tire speed is complied with. I also recommend servicing your trailer often if you are driving at speeds upward of 75 mph. You will want to ensure the bearings are properly lubricated and red grease, like # L11390, will work well. I've attached a help article on trailer maintenance...
    view full answer...

  • What is Normal Temperature Rating for Trailer Hubs
  • Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter than others.
    view full answer...

  • How to Grease the Gears on the Pro Series Round, A-Frame Jack, # PSEA20000103
  • To grease the gears on the Pro Series Round, A-Frame Jack, # PSEA20000103, you would need to remove the handle and top plate to expose the gears. The gears come already greased but if more is needed, you would have to completely remove the old grease (not all greases are compatible with each other) before adding the new grease like LubriMatic LMX Industrial Strength Grease, # L11390.
    view full answer...


Do you have a question about this Tool?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality tools for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tool information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Robert G
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.