...EZ Lube axles like the item # T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot...
...You are going to want either our Bearing Kit # BK2-100 or the Timken Kit # TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter...
...with grease, you will also just want to check for any damage or wear and replace anything if needed. As long as everything looks fine, there is no need to replace the bearings based on time alone.
If you...
...with outer bearing LM67048, inner bearing 25580, your outer and inner races to match, grease seal, and new cotter pin. You will need to order however many hubs you are swapping out. You might also want to grab...
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
...Im in need of a brake drum/hub, bearings and electric brake assemblies for the driver side rear for a travel trailer. Easy grease is preferred. The axle ID is LCI35-SBSA-87.5-68.5-NOSP-OS-L...
...Hi Tony; the # BK2-100 and # TMK52VR come with the same size bearings and grease seal. The main difference is the Timken name. This is usually associated with a higher quality bearings that are made...
Hey Roland, thanks for reaching out! Overslung axles are a special order situation and we unfortunately only have standard axles here at etrailer. With that being said, you can order a standard axle that meets your specs and then use the Dexter…
...I have the Blue Ox Sway Pro WDS. I saw your info on the Molybdenum grease. Blue Ox also recommends using this grease to lube the hitch ball. I still new at RVing so could you also use the Reese hitch...
...i have a 2019 heartland wilderness travel trailor with dexter easy lube fittings. If i use my lube /grease gun and fill with lube does this fill all bearings and pin on the one im filling and how...
...You can check the condition of your hub's races by carefully removing all bearing grease with a rag to expose the actual surface of the races. When they are completely free of grease, etc., inspect...
Filter Results
(1)
(1)
(2)
(10)
(1)
(2)
